Panasonic Network Disk Recorder Wj Nd200 Setup Instructions

21
[Zoom] box
Zooming can be adjusted by clicking the 
[WIDE] button or the  [TELE] button.
[Focus] box
Focusing can be adjusted by clicking the 
[NEAR] button or the  [FAR] button.
The auto focus function can be performed by clicking
the [AUTO] button.
[Auto mode] box
This box allows users to select the auto mode function
and operate the camera.
Click the  button to select the auto mode function
(Auto Track, Auto Pan, Preset Sequence, Sort, or
Patrol) of the camera, and click the  [START] but-
ton....

22
Setup Menu
Performing each setting item on the setup menu should be completed in advance to operate this unit.
The setup menu operations are performed from the Setup panel.
Setup menu chart
Setup items Description Page
Quick
Setup Perform the minimum required settings to operate this unit.
System
Basic Setup Perform the settings for the basic operations of this unit.
Time & Date Perform the settings for the current time and for displaying the
time and date.
Emergency recording
Emergency REC Perform...

23
Setup items Description Page
Comm
Basic Setup Perform the settings for a network. Settings for a network con-
nection such as settings of the IP address and gateway address
can be performed.
DDNS Setup Perform the basic settings of network DDNS.
Determine to enable or disable DDNS, or perform the settings of
the user IDs.
Proxy Setup Perform the basic network proxy settings.
Determine whether or not to use the proxy server, and perform
the settings such as the server address settings, etc.
SNMP Setup...

24
Setup items Description Page
Maintenance
Product Information Versions of the software, hardware (this unit), MAC address, the
internal temperature and the number of times the USE button is
pressed will be displayed.
Disk Information Hard disk information such as available capacity of the built-in
hard disk will be displayed.
Network Information Network information such as IP addresses of the connected cam-
eras and network line speed of the WJ-ND200 will be displayed.
Disk Setup Perform the settings...

25
Basic operation with the setup menu
Screenshot 1
Start operation from the top page.
Step 1
Click the [Setup] button.
Screenshot 2
The Setup panel will be displayed.
Step 2
Click the desired button relating to the settings to be
configured.
Setup panel 

26
Screenshot 3
The setup menu respective to the clicked button on the
Setup panel will be displayed.
Step 3
Click the tab relating to the settings to be configured.
Screenshot 4
The setup menu corresponding to the selected tab will
be displayed in the image display area.
Step 4
Perform the settings for each item.
Click the [SET] button after completing the settings.
→The settings will be applied.
When moving to other setup menu without clicking
the [SET] button, the edited settings will not be
applied....

27
Perform the minimum required settings [Quick]
Perform the minimum required settings to operate this unit.
Before perform the settings on each setup menu, check the settings on the Quick menu first.
Screenshot 1
Click the [Quick] button to display the Quick menu.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
Note:
When there are two or more [SET] buttons on the...

28
Setup items
Language
Select the display language for the web browser from
the following.
JAPANESE/ENGLISH
Time & Date
Adjust the current time and date.
Select numbers for year, month, day, hour and minute,
and click the [SET] button.
Important:
•Recording will not be performed for around 4 sec-
onds just after applying the time and date settings.
•Live images will turn to black screen and recording
will not be performed for around 4 seconds just after
applying the time and date settings even by...

29
In this case, check the IP address setting and regis-
ter the other IP address for the camera manually.
•When Register the IP address set with a detected
camera is selected and the DHCP setting of the
detected camera is ON, the unit will automatically
set the DHCP setting of the camera to OFF and
give a new IP address to the camera.
•Register the IP address automatically given by this
unit to a detected camera is available only when
OFF is set for the DHCP settings of the unit.
•Before selecting...

30
Perform the settings for the system [System]
Perform the settings for the system of this unit.
Perform the basic settings for the system [Basic Setup]
Perform the settings for the basic operations of this unit.
Screenshot 1
Click the [System] button in the Setup panel then click
the Basic Setup tab. The Basic Setup page will be
displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after...