Panasonic Network Camera Server Bb Hcs301a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 81
2.15 Procedures of Buffering or Transferring 
Images
The procedures from this page to page 112 are described about settings of the 
image buffer or transfer. See the procedures below to understand the general 
outline of the settings.
Buffer/Transfer by Timer 
(Page 82)
Transfer Method 
(Select one from the lists.)
 No Transfer, No Memory 
Overwrite
 No Transfer, Memory 
Overwrite
 FTP
 E-mail
Transfer Method 
(Select one from...

Operating Instructions
82
2.16 Buffering or Transferring Images by Timer
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Note
If you are recording images to the SD memory card, refresh interval slows 
down.
1.Click [Trigger] on the Setup page.
2.Click No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], and select [Timer] for trigger, and click 
[Next>].
Notes
 If you click [Save], all buffered images on the SD memory card are 
deleted.
 Click [Delete...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 83
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 
64).
 Clicking [].
SettingDescription
Enable Image 
Buffer/Transfer Check the box to enable the Trigger setting. Clear the box 
to disable it.
Trigger Selecting [Timer] enables this product to buffer/transfer the 
image by timer.
 Selecting [Alarm] enables this product to...

Operating Instructions
84
 Clicking [].
Note
Due to the network environment, object, number of accesses, enabling IPsec, 
this product may not record the numbers of images as you set. In this case, set 
the image buffer frequencies longer.
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033] 85
7.Select the transfer method, and click [Next>].
 Clicking [

Operating Instructions
86
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033] 87
SettingDescription
Server IP 
Address or 
Host Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the FTP server IP address, set 4 digits (0—255) and 
3 periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name (1—
255 characters).
 You can set IPv6 address.
Po r t N o. Enter a number (1—65535). Usually set to 21.
Login ID*2
*2But [] is not available.
 If your ISP...

Operating Instructions
88
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033] 89
SettingDescription
SMTP Server IP 
Address or Host 
Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the SMTP server IP address, set 4 digits (0—
255) and 3 periods such as 192.168.0.253. But 0.0.0.0 
and 255.255.255.255 are not available. Or set a host 
name (1—255 characters).
 You can set IPv6 address.
Po r t N o. Enter a number (1—65535). Usually set to 25.
POP3 Server IP 
Address or Host 
Name
*1
 If you...

Operating Instructions
90
8.Confirm the settings, and click [Save].
 New settings are saved.
 When finished, Success! is displayed.
9.Click [Go to Trigger page].
 The Trigger page is displayed.
Notes
 If you click [Save], all buffered images on the SD memory card are 
deleted.
 If you are buffering images on the internal memory, the following 
operations also delete all buffered images.
– Turning off this product.
– Saving the Date and Time page.
– Restarting, updating firmware or resetting this...