Home
>
Panasonic
>
Camera Accessories
>
Panasonic Network Camera Server Bb Hcs301a Operating Instructions
Panasonic Network Camera Server Bb Hcs301a Operating Instructions
Here you can view all the pages of manual Panasonic Network Camera Server Bb Hcs301a Operating Instructions. The Panasonic manuals for Camera Accessories are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
Operating Instructions
[For assistance, please call: 1-800-272-7033] 41
2.3 Connecting this Product to Your IPv6 Network
The Network page offers two options to configure this product in IPv6.
[Automatic Setup] automatically assigns an IPv6 address to this product.
[Static] allows the user to use a specific IPv6 address.
Note
IPv6 is the expanded protocol created for future Internet expansion. Your
network and your ISP must support IPv6 before you can use this feature.
1.Click [Network (IPv6)] on the...](http://img.usermanuals.tech/thumb/58/69506/w300_bb-hcs301a_en_om_d-40.png "Page 41
Operating Instructions
[For assistance, please call: 1-800-272-7033] 41
2.3 Connecting this Product to Your IPv6 Network
The Network page offers two options to configure this product in IPv6.
[Automatic Setup] automatically assigns an IPv6 address to this product.
[Static] allows the user to use a specific IPv6 address.
Note
IPv6 is the expanded protocol created for future Internet expansion. Your
network and your ISP must support IPv6 before you can use this feature.
1.Click [Network (IPv6)] on the...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 41 2.3 Connecting this Product to Your IPv6 Network The Network page offers two options to configure this product in IPv6. [Automatic Setup] automatically assigns an IPv6 address to this product. [Static] allows the user to use a specific IPv6 address. Note IPv6 is the expanded protocol created for future Internet expansion. Your network and your ISP must support IPv6 before you can use this feature. 1.Click [Network (IPv6)] on the...
Page 42
![Page 42
Operating Instructions
42
Static Setup
You can assign a static IPv6 address to this product. If you select [No] at the
Allow Access from the Internet, this product can be accessed only from the
LAN that has an same IPv6 prefix as this product.
Clicking [Cancel] takes you back to the previous page without saving
changes.
4.Click [Save] when finished.
New settings are saved.
When finished, the following page is displayed.
Note
The current network settings are shown on the Status page in the...](http://img.usermanuals.tech/thumb/58/69506/w300_bb-hcs301a_en_om_d-41.png "Page 42
Operating Instructions
42
Static Setup
You can assign a static IPv6 address to this product. If you select [No] at the
Allow Access from the Internet, this product can be accessed only from the
LAN that has an same IPv6 prefix as this product.
Clicking [Cancel] takes you back to the previous page without saving
changes.
4.Click [Save] when finished.
New settings are saved.
When finished, the following page is displayed.
Note
The current network settings are shown on the Status page in the...")
Operating Instructions 42 Static Setup You can assign a static IPv6 address to this product. If you select [No] at the Allow Access from the Internet, this product can be accessed only from the LAN that has an same IPv6 prefix as this product. Clicking [Cancel] takes you back to the previous page without saving changes. 4.Click [Save] when finished. New settings are saved. When finished, the following page is displayed. Note The current network settings are shown on the Status page in the...
Page 43
![Page 43
Operating Instructions
[For assistance, please call: 1-800-272-7033] 43
Notes
When you do not know this product IP address while setting [Automatic
Setup], you can search it by using the Setup Program (see page
155). Or
you can search it on the Status page (see page 133) after accessing this
product in IPv4.
If this product is restarted, all buffered images on the internal memory are
deleted. The buffered images on the SD memory card are not deleted.
SettingDescription
Allow Access from
the...](http://img.usermanuals.tech/thumb/58/69506/w300_bb-hcs301a_en_om_d-42.png "Page 43
Operating Instructions
[For assistance, please call: 1-800-272-7033] 43
Notes
When you do not know this product IP address while setting [Automatic
Setup], you can search it by using the Setup Program (see page
155). Or
you can search it on the Status page (see page 133) after accessing this
product in IPv4.
If this product is restarted, all buffered images on the internal memory are
deleted. The buffered images on the SD memory card are not deleted.
SettingDescription
Allow Access from
the...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 43 Notes When you do not know this product IP address while setting [Automatic Setup], you can search it by using the Setup Program (see page 155). Or you can search it on the Status page (see page 133) after accessing this product in IPv4. If this product is restarted, all buffered images on the internal memory are deleted. The buffered images on the SD memory card are not deleted. SettingDescription Allow Access from the...
Page 44
Operating Instructions 44 DNS Server Address DNS server address is required in the following conditions. – Transferring images by E-mail or FTP – Setting products by their host names on the Multi- Camera Setup page – Using the DynamicDNS service – Using the alarm log notification If you have the assigned DNS server IPv6 addresses by your ISP or network administrator, enter them in this data field. They usually have two addresses. IPv6 address consists of 8 hexadecimal digits divided with :....
Page 45
![Page 45
Operating Instructions
[For assistance, please call: 1-800-272-7033] 45
2.4 What is IPsec?
IPsec provides security for the transmission of sensitive information over
unprotected networks such as the Internet. IPsec authenticates IP packets
between participating IPsec devices.
This products IPsec Feature
This product can use IPsec in both IPv4/IPv6. This product supports the following
IPsec feature.
ItemSupported Feature
IKEv1Pre-shared Key Method
Phase 1 mode:Main mode*1
*1This product does not...](http://img.usermanuals.tech/thumb/58/69506/w300_bb-hcs301a_en_om_d-44.png "Page 45
Operating Instructions
[For assistance, please call: 1-800-272-7033] 45
2.4 What is IPsec?
IPsec provides security for the transmission of sensitive information over
unprotected networks such as the Internet. IPsec authenticates IP packets
between participating IPsec devices.
This products IPsec Feature
This product can use IPsec in both IPv4/IPv6. This product supports the following
IPsec feature.
ItemSupported Feature
IKEv1Pre-shared Key Method
Phase 1 mode:Main mode*1
*1This product does not...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 45 2.4 What is IPsec? IPsec provides security for the transmission of sensitive information over unprotected networks such as the Internet. IPsec authenticates IP packets between participating IPsec devices. This products IPsec Feature This product can use IPsec in both IPv4/IPv6. This product supports the following IPsec feature. ItemSupported Feature IKEv1Pre-shared Key Method Phase 1 mode:Main mode*1 *1This product does not...
Page 46
Operating Instructions 46 IPsec Mode Selection Select transport mode or tunnel mode to access this product. Transport Mode (IPv4 Only) The image is encrypted in the whole way between this product and your PC. In the environment of Windows XP Service Pack 1 or later, transport mode is available only in IPv4. Prepare the following requirements. ItemSupported Feature PCOperating System:Windows XP Service Pack 1 or later Web Browser:Internet Explorer 6.0 or later ISP Service:Services for multiple static...
Page 47
![Page 47
Operating Instructions
[For assistance, please call: 1-800-272-7033] 47
Tunnel Mode (IPv4/IPv6)
An IPsec mode of operation where the entire IP packet including IP header is
authenticated and encrypted. A new IP header is added (protecting the entire
original packet). Both VPN clients and VPN gateways can use this mode.
Note
This product can be accessed only from the PCs under the VPN router. Other
PCs cannot access this product.
Prepare the following requirements.
ItemSupported Feature
PCOperating...](http://img.usermanuals.tech/thumb/58/69506/w300_bb-hcs301a_en_om_d-46.png "Page 47
Operating Instructions
[For assistance, please call: 1-800-272-7033] 47
Tunnel Mode (IPv4/IPv6)
An IPsec mode of operation where the entire IP packet including IP header is
authenticated and encrypted. A new IP header is added (protecting the entire
original packet). Both VPN clients and VPN gateways can use this mode.
Note
This product can be accessed only from the PCs under the VPN router. Other
PCs cannot access this product.
Prepare the following requirements.
ItemSupported Feature
PCOperating...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 47 Tunnel Mode (IPv4/IPv6) An IPsec mode of operation where the entire IP packet including IP header is authenticated and encrypted. A new IP header is added (protecting the entire original packet). Both VPN clients and VPN gateways can use this mode. Note This product can be accessed only from the PCs under the VPN router. Other PCs cannot access this product. Prepare the following requirements. ItemSupported Feature PCOperating...
Page 48
![Page 48
Operating Instructions
48
2.5 Encrypt the Camera Image in Transport Mode
This product can encrypt the image using IPsec transport mode.
Note
If you use IPsec, refresh interval slows down.
1.Click [IPsec] on the Setup page.
2.Click Camera in the Transport column.
If you use transport mode in E-mail or FTP transfer, click No. in the Buffer/
Transfer column.
Note
To display Alarm Log, set Alarm or Motion Detection for Trigger Setting
and check [Enable].
3.Enter each parameter in the data field.
The...](http://img.usermanuals.tech/thumb/58/69506/w300_bb-hcs301a_en_om_d-47.png "Page 48
Operating Instructions
48
2.5 Encrypt the Camera Image in Transport Mode
This product can encrypt the image using IPsec transport mode.
Note
If you use IPsec, refresh interval slows down.
1.Click [IPsec] on the Setup page.
2.Click Camera in the Transport column.
If you use transport mode in E-mail or FTP transfer, click No. in the Buffer/
Transfer column.
Note
To display Alarm Log, set Alarm or Motion Detection for Trigger Setting
and check [Enable].
3.Enter each parameter in the data field.
The...")
Operating Instructions 48 2.5 Encrypt the Camera Image in Transport Mode This product can encrypt the image using IPsec transport mode. Note If you use IPsec, refresh interval slows down. 1.Click [IPsec] on the Setup page. 2.Click Camera in the Transport column. If you use transport mode in E-mail or FTP transfer, click No. in the Buffer/ Transfer column. Note To display Alarm Log, set Alarm or Motion Detection for Trigger Setting and check [Enable]. 3.Enter each parameter in the data field. The...
Page 49
![Page 49
Operating Instructions
[For assistance, please call: 1-800-272-7033] 49
4.Click [Save] when finished.
New settings are saved.
5.Click [Cancel].
The IPsec page is displayed.
6.Check [Use] in the IPsec column, select an encoding strength, and click
[Save].
SettingDescription
Status Check the box to use this encryption method.
Pre-Shared Key It is the key to use in the authentication of communications.
Enter the same pre-shared key as your PC.
Enter ASCII characters for the host name (see page...](http://img.usermanuals.tech/thumb/58/69506/w300_bb-hcs301a_en_om_d-48.png "Page 49
Operating Instructions
[For assistance, please call: 1-800-272-7033] 49
4.Click [Save] when finished.
New settings are saved.
5.Click [Cancel].
The IPsec page is displayed.
6.Check [Use] in the IPsec column, select an encoding strength, and click
[Save].
SettingDescription
Status Check the box to use this encryption method.
Pre-Shared Key It is the key to use in the authentication of communications.
Enter the same pre-shared key as your PC.
Enter ASCII characters for the host name (see page...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 49 4.Click [Save] when finished. New settings are saved. 5.Click [Cancel]. The IPsec page is displayed. 6.Check [Use] in the IPsec column, select an encoding strength, and click [Save]. SettingDescription Status Check the box to use this encryption method. Pre-Shared Key It is the key to use in the authentication of communications. Enter the same pre-shared key as your PC. Enter ASCII characters for the host name (see page...
Page 50
![Page 50
Operating Instructions
50
7.Click [Restart].
8.Set up your PC as it fits to the requirements on page 46.
Set the FTP server or E-mail server to transfer images.
9.Access this product (see page 12).
If you can access this product, the IPsec setup is complete.
Notes
In IPsec communications, IPsec is displayed on the Top page or the
Single Camera page.
If you cannot communicate using IPsec, see page 20 of the
Troubleshooting on the Setup CD-ROM.
See the Panasonic support website at...](http://img.usermanuals.tech/thumb/58/69506/w300_bb-hcs301a_en_om_d-49.png "Page 50
Operating Instructions
50
7.Click [Restart].
8.Set up your PC as it fits to the requirements on page 46.
Set the FTP server or E-mail server to transfer images.
9.Access this product (see page 12).
If you can access this product, the IPsec setup is complete.
Notes
In IPsec communications, IPsec is displayed on the Top page or the
Single Camera page.
If you cannot communicate using IPsec, see page 20 of the
Troubleshooting on the Setup CD-ROM.
See the Panasonic support website at...")
Operating Instructions 50 7.Click [Restart]. 8.Set up your PC as it fits to the requirements on page 46. Set the FTP server or E-mail server to transfer images. 9.Access this product (see page 12). If you can access this product, the IPsec setup is complete. Notes In IPsec communications, IPsec is displayed on the Top page or the Single Camera page. If you cannot communicate using IPsec, see page 20 of the Troubleshooting on the Setup CD-ROM. See the Panasonic support website at...