Panasonic Network Camera Server Bb Hcs301a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 31
1.6.1 Deleting Buffered Images
If you intend to delete images for each transfer condition, click [Delete Buffered 
Images] on the Trigger page (see page 
82, page 91 or page 102).
Notes
 If you click [Save] on the Image Buffer/Transfer page, all buffered images on 
the SD memory card are deleted.
 If you are buffering images on the internal memory, the following operations 
also delete all buffered images.
– Turning off this...

Operating Instructions
32
1.7 Viewing Still Images on Your Cell Phone
You can view still images over the Internet from a compatible cell phone.
Enter http://IP address (or URL):Port Number/mobile on a cell phone and press [OK]. 
 When the port number is set to 80 (default), it is not required.
 This product must be allowed the Internet access for cell phone access.
 When an authentication window is displayed, enter the administrators or the 
general users user name and password.
 A still image is...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 33
 Some cell phones are not compatible with this product. Some phones may 
allow viewing only on port 80, and some may not support password 
authentication. See the Panasonic support website at 
http://panasonic.co.jp/
pcc/products/en/netwkcam/ for a cell phone model list, and the compatibility 
level which has been verified with this product.
 Some cell phones display images not at the specified resolution but at a 
decreased size....

Operating Instructions
34
2 Various Product Features
2.1 Using Product Features
1.Access this product (see page 12).
 The Top page is displayed.
Notes
 When [Permit access from guest users] is set on the Security: 
Administrator page, click [Login] tab and log in as an administrator.
 When users other than an administrator are accessing this product, the 
[Setup] and [Maintenance] tabs are not displayed.
 If [View Multi-Camera page] or [View Buffered Image page] is not 
permitted on the General User...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 35
Basic
(1)Network (IPv4)Configures the IPv4 network settings to connect this 
product to the network (see page 
37).
(2)Network (IPv6)Configures the IPv6 network settings to connect this 
product to the network (see page 
41).
(3)IPsecEnables IPsec (Transport or Tunnel mode) (see page 45).
(4)UPnPEnables automatic port forwarding or shortcut to this 
product (see page 
55).
(5)DynamicDNSRegisters with the DynamicDNS service (see page...

Operating Instructions
36
Advanced
(14)Image DisplaySets resolution, image quality and refresh interval of Single 
Camera and Multi-Camera page, time stamp setting, 
language and banner (see page 
123).
(15)Multi-Camera*1Sets this product or Panasonic Network Camera IP address 
or host name, camera name on the Multi-Camera page 
(maximum 12 cameras) (see page 
126).
(16)Operation 
TimeSets time period to display images (see page 128).
(17)External 
OutputSets the digital output terminal of the External...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 37
2.2 Connecting this Product to Your IPv4 Network
The Network page offers three options to configure this product in IPv4.
 [Automatic Setup] automatically assigns an unused IP address to this product, 
and uses UPnPTM (Universal Plug and Play) to configure your router.
 [Static] allows the user to use a specific IP address.
 [DHCP] is offered for ISPs that require this option.
1.Click [Network (IPv4)] on the Setup page.
2.Click a...

Operating Instructions
38
4.Click [Save] when finished.
 New settings are saved.
 When finished, the following page is displayed. 
Note
The current network settings are shown on the Status page in the Maintenance 
section (see page 
133).
5.Click [Restart].
 This product restarts, and the Top page is displayed.
 Checking [Yes] for [Allow Access from the Internet] on [Automatic Setup] 
may not display the Top page, because the port number may change. Use 
the Setup Program to access this product.
DHCP...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 39
Notes
 When you do not know the IP address while setting [Automatic Setup] or 
[DHCP Setup], you can search it by using the Setup Program (see page 
155).
 If this product is restarted, all buffered images on the internal memory are 
deleted. The buffered images on the SD memory card are not deleted.
SettingDescription
Allow Access from 
the Internet 
(Automatic Setup 
Only) Allow Access from the Internet setting automatically...

Operating Instructions
40
Default Gateway*1
(Static/DHCP Only)
 If you have the assigned Default Gateway address by your 
ISP or network administrator, enter it in this data field.
 Set 4 digits (0—255) and 3 periods such as 
192.168.0.253. But 0.0.0.0 and 255.255.255.255 are 
not available.
DNS Server 
Address*1
(Static/DHCP Only)
 DNS server address is required in the following conditions.
– Transferring images by E-mail or FTP
– Setting products by their host names on the Multi-
Camera Setup page
–...