Panasonic Network Camera Server Bb Hcs301a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 61
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes.
 You can get DynamicDNS information from the DynamicDNS service 
industry company.
3.Click [Save] after finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to DynamicDNS page].
 The DynamicDNS page is displayed.
Notes
 It may take several minutes for the registered URL to connect.
 Some DynamicDNS service is...

Operating Instructions
62
Confirming the Internet access
Due to the router specifications, the image may not be displayed even if you 
access this product from your PC on the same LAN as this product. In this 
case, access this product in the following procedures.
 Accessing from the PC on another network (see page 12) 
http://...:
 Accessing from your cell phone (see page 32) 
http://...:/mobile
User-specified DynamicDNS
 We do neither confirming the operation nor the operation guarantee 
concerning...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 63
How the DynamicDNS service works
1.Your ISP assigns a global IP address to your Internet access account that 
changes periodically. This is the address needed to access this product over 
the Internet.
2.When your ISP assigned global IP address changes, this product 
automatically notifies the DynamicDNS service server of the new address in 
the DynamicDNS. This product notifies the DynamicDNS service server of the 
new address in...

Operating Instructions
64
2.9 Setting Date and Time
The Date and Time page allows you to set date and time. Date and time are used 
for each images (Single, Multi and Buffered), Trigger, Alarm Log and Operation 
Time.
Note
Saving the date and time settings deletes all buffered images on the internal 
memory.
1.Click [Date and Time] on the Setup page.
2.Set each parameter.
 Set [Automatic Time Adjustment] to synchronize the time automatically 
with an NTP server.
 Clicking [Cancel] cancels your settings...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 65
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Date and Time page].
 The Date and Time page is displayed.
SettingDescription
Time Setting Select date and format (AM/PM or 24 H). These settings 
are used for each images (Single, Multi and Buffered), 
Trigger, Alarm Log and Operation Time. But E-mail subject 
and file name by E-mail or FTP transfer uses only 24 h 
for...

Operating Instructions
66
Note
Date and time settings become incorrect depending on the length of power-on 
time or the internal temperature. Using the Automatic Time Adjustment is 
recommended. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 67
2.10 Changing Camera Settings
The Camera page allows you to set the Camera Name Vertical Resolution and 
Picture position adjustment.
1.Click [Camera] on the Setup page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes. 

Operating Instructions
68
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Camera page].
 The Camera page is displayed.
Note
Clicking [Save] saves the adjusted position. Clicking [Cancel] cancels your 
settings without saving the position.
Picture position adjustment is reflected on the actual screen while 
adjusting.
When not to click [Save], the video is displayed in the adjusted position 
until turn the power off is turned off, however,...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 69
2.11 Adjusting Audio
The Audio page adjusts the audio input sensitivity and audio output volume etc.
1.Click [Audio] on the Setup page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes. 

Operating Instructions
70
SettingDescription
Output Set the audio to output to this products audio output terminal.
– Remote Audio: Audio is outputted from the 
microphone input of your PC.
– Local Audio: It outputs the audio from the audio output 
device connected to this product.
– Local Audio + 
Remote Audio*: 
Audio is outputted from the microphone 
input of your PC and from the audio input 
device connected to this product.
– Disable: It disables the audio output.
Vo l u m e It controls the audio...