Panasonic Network Camera Server Bb Hcs301a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 101
10.Click [Go to Trigger page].
 The Trigger page is displayed.
Notes
 If you set a short interval to transfer image to a cell phone, many E-mails 
may be sent to it leading to a large phone bill. Therefore, we recommend 
you to set a long interval. 1 image per minute frequency is recommended.
 Alarm transfer stops its operations until this product finishes all transfers. 
For example, if this product transfers 3 images per minute...

Operating Instructions
102
2.18 Buffering or Transferring Images by Motion 
Detection Signal
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Notes
 A change due to light or wind may detect motions mistakenly.
 Motion detection level is changed depending on resolution, image quality, and 
object situation. Confirm the level by performing motion detection recording.
 Enabling Motion Detection delays the frame rate of this product.
 Objects moving fast may not be detected....

Operating Instructions
[For assistance, please call: 1-800-272-7033] 103
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 
64). 
 Clicking [>Back] takes you back to the previous page.
 Clicking [Cancel] takes you back to the Trigger page without saving 
changes.
SettingDescription
Enable Image 
Buffer/Transfer  Check the box to enable the Trigger setting. Clear the box 
to disable it.
Trigger Selecting...

Operating Instructions
104
5.Set the image settings, and click [Next>].
 Clicking [>Back] takes you back to the previous page.
 Clicking [Cancel] takes you back to the Trigger page without saving 
changes.
SettingDescription
Image 
Resolution  Select image resolution (640 × 480, 320 × 240 (default) or 
160 × 120 pixels) to buffer or transfer. 
Image Quality  Select the image quality.
[Favor Clarity] optimizes for good quality. 
[Standard] offers standard quality. (Default)
[Favor Motion] optimizes...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 105
6.Set the image buffer frequencies, and click [Next>].
Note
Due to the network environment, object, number of accesses, enabling IPsec, 
this product may not record the numbers of images as you set. In this case, set 
the image buffer frequencies longer.
 Clicking [Cancel] takes you back to the Trigger page without saving 
changes.
 Clicking [

Operating Instructions
106
7.Select the transfer method, and click [Next>].
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033] 107
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
108
SettingDescription
Server IP 
Address or 
Host Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the FTP server IP address, set 4 digits (0—255) and 
3 periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name (1—
255 characters).
 You can set IPv6 address.
Por t  N o. Enter a number (1—65535). Usually set to 21.
Login ID*2
*2But [] is not available.
 If your ISP requires a login ID, set it (0—63 characters)....

Operating Instructions
[For assistance, please call: 1-800-272-7033] 109
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
110
SettingDescription
SMTP Server IP 
Address or Host 
Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the SMTP server IP address, set 4 digits (0—
255) and 3 periods such as 192.168.0.253. But 0.0.0.0 
and 255.255.255.255 are not available. Or set a host 
name (1—255 characters).
 You can set IPv6 address.
Por t  N o. Enter a number (1—65535). Usually set to 25.
POP3 Server IP 
Address or Host 
Name
*1
 If you set the POP3 server IP address, set 4 digits...