Panasonic Network Camera Server Bb Hcs301a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 141
3.2 Support page
3.2.1 Seeing Help page
The Help page displays explanations for each feature about the following 1. to 6. 
items.
Clicking [Help] on the Support page displays the next page.
3.2.2 Seeing Product Information
You can see product information on the Panasonic support website.
Clicking [Product Information] on the Support page displays the URL, click it.
Note
If this product is not connected to the Internet, the website...

Operating Instructions
142
3.2.3 Seeing Support Information
You can see support information on the Panasonic support website.
Clicking [Support Information] on the Support page displays the URL, click it.
Note
If this product is not connected to the Internet, the website cannot be 
displayed. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 143
3.3 External I/O
If you connect the external devices such as sensors to the External I/O and image 
buffer/transfer by alarm signal is set, the image is transferred by the alarm 
detection.
Explanation of the External I/O
Note
The External I/O (Input/Output) is independent. Output terminal is controlled 
only by External Output Control page on page 
130.
PinFeatures
GGND pin
1External Sensor Input
 Use it by opening or GND...

Operating Instructions
144
Circuit Diagram Example
CAUTION
The external I/O is not capable of connecting directly to devices that 
require large amounts of current. In some case, a custom interface 
circuit (customer-provided) may have to be used. Serious damage to 
this product may result if a device is connected to the external I/O 
that exceeds its electrical capability (see page 
143).
The low voltage/current circuits and high voltage/current circuits are 
in the circuit. The qualified electrician...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 145
3.4 FACTORY DEFAULT RESET Button
This product has a FACTORY DEFAULT RESET button in front.
Pressing the FACTORY DEFAULT RESET button resets this product to factory 
default. If you lose your user name and password, use this button to reset this 
product.
 Press the FACTORY DEFAULT RESET button for 1 second when this product 
is on.
 The indicator blinks orange, and then turns off for 5 seconds.
 The settings and password are...

Operating Instructions
146
3.5 Default Setting List
Basic
ItemsDefaultRequiredNote
Network 
(IPv4)Connection ModeAutomatic 
Setup-Automatic Setup/
Static/DHCP
Allow Access from the 
Internet (Automatic 
Setup only)No--
Network Configuration 
from Setup Program 
(Static/DHCP only)Enable--
Port No.  
(Static/DHCP only)
80-20, 21, 25 or 110 
is not available.*2
IP address  
(Static only)
192.168.0.
253When 
setting Static*1
Subnet Mask  
(Static only)
255.255.
255.0When 
setting Static*1
Host Name  
(DHCP...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 147
Network 
(IPv6)Connection ModeAutomatic 
Setup-Automatic Setup/
Static
Allow Access from the 
Internet (Automatic 
Setup only)No--
Port No.  
(Static only)
80-20, 21, 25 or 110 
is not available.*2
IP address  
(Static only)
[Blank]When 
setting Static*1
Default Gateway (Static 
only)[Blank]When using 
Gateway*1
DNS Server 1 
DNS Server 2
[Blank]When using 
DNS*1
Max. Bandwidth Usage 
(Mbps)Unlimited-0.1, 0.2, 0.3, 0.5, 1 
or...

Operating Instructions
148
Date and 
TimeDate--Not initialized
For matAM/PM--
Time--Not initialized
Automatic Time 
AdjustmentNo checkWhen using 
NTP-
Time ZoneGMT -05:00--
Adjust Clock for 
Daylight Saving TimeNo check--
Start DayApr,
First Sunday,
2 AM--
End DayOct,
Last Sunday,
2 AM--
CameraCamera NameNetwork
CameraRequired1—15 characters 
*6
Vertical Resolution 
(for 640 × 480 mode)
480
(Better for 
still images)-480/240
Picture position 
adjustment- --
AudioOutput Local Audio+
Remote 
Audio-Remote...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 149
Account
ItemsDefaultRequiredNote
Security: 
AdministratorGeneral 
AuthenticationDo not permit 
access from 
guest users --
User Name[Blank]When setting 
administrator6—15 characters 
*3
Password[Blank]When setting 
administrator6—15 characters 
*3
Retype 
Password[Blank]When setting 
administrator6—15 characters 
*3
General UserUser ID List[Blank]--
User Name[Blank]When setting 
general user6—15 characters 
*3
Password[Blank]When...

Operating Instructions
150
Buffer/Transfer
ItemsDefaultRequiredNote
Tr i g g e rStatusOff--
Tr i g g e rTimer--
Active Time of TriggerAlways--
Image Setting 
(Image Resolution)
320 × 240-160 × 120, 320 × 
240, 640 × 480
Image QualityStandard-Favo r  Cla r i ty,  
Standard, Favor 
Motion, Mobile 
phone
Image Buffer 
FrequencyEvery 1 s, 
buffer 1 
image.-1 image per 
hour—30 images 
per second
Transfer MethodNo Transfer, 
No Memory 
Overwrite--
NotifyDisable--
Motion 
DetectionThresholdThird blocks 
from...