Panasonic Network Camera Server Bb Hcs301a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 131
2.30 Changing Indicator Display
The Indicator Control page allows you to select Indicator operation. Indicator has 
three options.
Always on
 Turn the indicator on when this product is accessed.
Always off
1.Click [Indicator Control] on the Setup page.
2.Select indicator option.
 Clicking [Cancel] cancels your settings without saving changes.
Notes
 See page 10 for indicator display.
 Selecting [Never turn indicator on] keeps...

Operating Instructions
132
3 Maintenance
3.1 Maintenance page
Maintenance
(1)StatusDisplays the settings and status (see page 133).
(2)Session StatusDisplays information on access to this product (see page 
133).
(3)Alarm LogDisplays alarm logs (see page 134).
(4)RestartRestarts this product (see page 134).
(5)Update FirmwareUpdates the firmware (see page 135).
(6)Save SettingsCreates a configuration file (see page 138).
(7)Load SettingsLoads settings from a configuration file (see page 139).
(8)Reset to...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 133
3.1.1 Confirming the Status
The Status page allows you to check the status of this product. The status 
information provides support for troubleshooting.
Clicking [Status] displays the following page.
Note
See the Panasonic support website at http://panasonic.co.jp/pcc/products/
en/netwkcam/ for details about status information.
3.1.2 Confirming Session Status
The Session Status page displays client information connecting to this...

Operating Instructions
134
3.1.3 Displaying Alarm Logs
Displays up to 50 Alarm Logs in order of time. Old logs will be overwritten by new 
one.
1.Click [Alarm Log] on Maintenance page.
2.Alarm Logs are displayed.
Note
If this product is restarted, all alarm logs are deleted.
3.1.4 Restarting this Product
The Restart page can restart this product. This product restarts by disconnecting 
the power cord from the outlet and reconnecting it again.
Note
When this product restarts, the buffered images and alarm...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 135
3.1.5 Updating this Product Firmware
The Update Firmware page allows you to update the firmware. If the new firmware 
is available, install it into this product.
Notes
 Do not turn off the power during firmware update.
 The version number can be seen on the Top page or the Status page.
 All buffered images and alarm logs on the internal memory will be deleted 
after the firmware update. The buffered images on the SD memory card...

Operating Instructions
136
 The Update page is displayed in about 1 minute.
4.Click [Browse...].
 A dialog box is displayed to select the firmware.
5.Select the firmware (including directory information) and click [Open].
 The firmware file name is displayed.
6.Confirm the firmware file name, and click [Update Firmware].
 Clicking [Cancel] takes you back to the Top page without firmware update.
 The next message is displayed during update.
 This product restarts automatically after update.
 The...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 137
7.Confirm that the version number on the Top page is updated.
 If the version number is updated, the firmware update is complete.
Updated version 

Operating Instructions
138
3.1.6 Creating Configuration File
A configuration file can be saved on your PC. You can load the settings from the 
configuration file on the Load Settings page (see page 
139).
Note
The saved image has privacy information. Prevent private information leaks.
1.Click [Save Settings] on the Maintenance page.
2.Click [Save].
3.Click [Save] on the File Download dialog box.
4.Specify the location, and click [Save] on the Save As dialog box.
 The configuration file is saved in the...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 139
3.1.7 Loading Settings from a Configuration File
The settings can be loaded from a configuration file. If you reset this product to 
factory default, this product can load its settings from the configuration file.
Notes
 The configuration file has network settings. When the settings are loaded, 
the network settings are also loaded as they were saved. 
 If you try to update this product, create a configuration file after updating...

Operating Instructions
140
3.1.8 Resetting this Product to Factory Default
All settings are reset to factory default directly after the Execute button is clicked.
1.Click [Reset to Factory Default] on the Maintenance page.
2.Click [Execute].
 The indicator blinks orange, and then turns off for 10 seconds.
 All settings (user name, password, IP address, subnet mask etc.) are 
reset to factory default.
 If this product is reset to factory default, the network connection mode 
changes to [Automatic...