Panasonic Network Camera Server Bb Hcs301a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 121
2.25 Notifying Setup of an Alarm Log
Once a day, an alarm log sent at a specified time can be checked. To enable Alarm 
Log, set Alarm or Motion Detection for Trigger Setting and check [Enable].
1.Click [Alarm Log] on the Setup page.
2.Set each parameter.
3.Click [Save] to save the settings.
 Clicking [Cancel] cancels your settings without saving changes.
4.Click [Go to Alarm Log page].
 The Alarm Log page is displayed.
Note
If...

Operating Instructions
122
SettingDescription
A setup of operation Alarm log operation can be set here.
Time Set the date and time to send alarm logs via E-mail.
SMTP Server IP 
Address or Host 
Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the server IP address, set 4 digits (0—255) 
and 3 periods such as 192.168.0.253. But 0.0.0.0 
and 255.255.255.255 are not available. Or set a host 
name (0—255 characters).
 An IPv6 address can be set.
Por t  N o. Enter a number...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 123
2.26 Changing Initial Settings on the Single 
Camera page or the Multi-Camera page
The Image Display page allows you to change initial settings (display settings when 
a user accesses this product) of image resolution, image quality and refresh 
interval. You can display a time stamp on the image. The initial language can be 
selected from eight languages. The banner can be displayed for administrator or 
general users or both....

Operating Instructions
124
SettingDescription
Image Resolution Select the image resolution.
640 × 480 pixels (Only for the Single Camera page)
320 × 240 pixels (default)
160 × 120 pixels (Only for the Multi-Camera page)
Image Quality Select the image quality.
[Favor Clarity] optimizes for good quality.
[Standard] offers standard quality. (default)
[Favor Motion] optimizes for enhanced motion.
Refresh Interval Select a refresh interval. 
Motion, 3 s, 5 s, 10 s, 30 s, and 60 s
Time stamp setting You...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 125
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Image Display page].
 The Image Display page is displayed. 

Operating Instructions
126
2.27 Configuring Multiple Images
To view images on the Multi-Camera page, this products or the Panasonic Network 
Cameras IP address and camera name must be configured on the Multi-Camera 
Setup page. These configurations are required to use the Multi-Camera page. Up 
to 12 cameras can be configured.
1.Click [Multi-Camera] on the Setup page.
2.Click Add.
Notes
 If you click the number, the modification page is displayed. The setting can 
be modified or deleted on it.
 If you...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 127
Notes
 Set the local IP address and port number for this product on the same 
LAN.
 If this product is accessed from the Internet, be sure to use the global IP 
address. In this situation, local IP addresses such as 
192.168.
. cannot be used.
4.Click [Save] when finished.
 New settings are saved.
 The Multi-Camera Setup page is displayed.
SettingDescription
Display Check the box to enable the image display.
IP Address*1 or...

Operating Instructions
128
2.28 Specifying Operation Time
The Operation Time page allows you to limit the operation time. The image turns 
to a gray screen outside the operation time.
Notes
 If you wrongly set the time period, your privacy may be seen. Confirm the 
time period after the setup.
 If you access this product as an administrator, you can view the image 
outside the time period.
1.Click [Operation Time] on the Setup page.
2.Click [No.] to set the operation time.
Note
If No. 1—7 are disabled,...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 129
4.Click [Save] when finished.
 New settings are saved.
 The Operation Time page is displayed.
About Operation Time
In the operation time settings, the enabled settings take priority over the disabled 
settings. Therefore, if Monday or Tuesday is disabled in a setting but enabled in 
other settings, this product can be operated on both Monday and Tuesday.
SettingDescription
Enable Check the box to enable the setting. Clear the box...

Operating Instructions
130
2.29 Controlling External Output Terminal
The digital output terminal allows you to control the external devices. You can 
change the initial status of the output signal.
Note
Connect the external devices to this product.
1.Click [External Output] on the Setup page.
2.Click [Save] when finished.
 Clicking [Cancel] cancels your settings without saving changes.
 New settings are saved.
 When finished, Success! is displayed. 
3.Click [Go to External Output Control page].
 The...