Panasonic Network Camera Server BB HCS301A Geting Started Manual

Operating Instructions
[For assistance, please call: 1-800-272-7033] 65
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Date and Time page].
 The Date and Time page is displayed.
SettingDescription
Time Setting Select date and format (AM/PM or 24 H). These settings 
are used for each images (Single, Multi and Buffered), 
Trigger, Alarm Log and Operation Time. But E-mail subject 
and file name by E-mail or FTP transfer uses only 24 h 
for...

Operating Instructions
66
Note
Date and time settings become incorrect depending on the length of power-on 
time or the internal temperature. Using the Automatic Time Adjustment is 
recommended. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 67
2.10 Changing Camera Settings
The Camera page allows you to set the Camera Name Vertical Resolution and 
Picture position adjustment.
1.Click [Camera] on the Setup page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes. 

Operating Instructions
68
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Camera page].
 The Camera page is displayed.
Note
Clicking [Save] saves the adjusted position. Clicking [Cancel] cancels your 
settings without saving the position.
Picture position adjustment is reflected on the actual screen while 
adjusting.
When not to click [Save], the video is displayed in the adjusted position 
until turn the power off is turned off, however,...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 69
2.11 Adjusting Audio
The Audio page adjusts the audio input sensitivity and audio output volume etc.
1.Click [Audio] on the Setup page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes. 

Operating Instructions
70
SettingDescription
Output Set the audio to output to this products audio output terminal.
– Remote Audio: Audio is outputted from the 
microphone input of your PC.
– Local Audio: It outputs the audio from the audio output 
device connected to this product.
– Local Audio + 
Remote Audio*: 
Audio is outputted from the microphone 
input of your PC and from the audio input 
device connected to this product.
– Disable: It disables the audio output.
Vo l u m e It controls the audio...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 71
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Audio page].
 The Audio page is displayed.
PC Audio Input 
Timeout  It controls the continuous receiving time of the microphone 
audio from your PC.
 The following settings are available.
1 min, 2 min, 3 min, 5 min, 10 min, 20 min, 30 min, 60 min
Input It controls to enable or disable audio input to this product. 
If...

Operating Instructions
72
Adjusting local audio and remote audio
When [Local Audio + Remote Audio] is selected on the Audio page, audio from the 
audio input terminal (Local Audio) and audio from the microphone connected to 
your PC (Remote Audio) are mixed and outputted from the audio output terminal. 
If they are not balanced well, adjust the audio following the procedures below.
1.Adjust the remote audio (the volume of the microphone connected to your PC).
 In this example, the menus and windows are...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 73
2.Adjust the sensitivity of the local audio.
(1)Click [Audio] on the Setup page.
(2)Select [Minimum], [Standard] or [Maximum] in the Sensitivity (see page 
69).
(3)Click [Save].
3.Adjust both audios.
(1)Click [Audio] on the Setup page.
(2)Select [Minimum], [Standard] or [Maximum] in the Volume (see page 69).
(3)Click [Save]. 

Operating Instructions
74
2.12 Changing Authentication Setting and 
Administrator User Name and Password
The Security: Administrator page allows you to change authentication, 
administrator user name and password. The authentication window is displayed, 
and allows the registered users to access this product.
Notes
 If you access this product for the first time, the window to set administrator user 
name and password is displayed. Make a note of the user name and password 
so that you will not forget...