Home
>
Panasonic
>
Security system
>
Panasonic Network Camera Server BB HCS301A Geting Started Manual
Panasonic Network Camera Server BB HCS301A Geting Started Manual
Here you can view all the pages of manual Panasonic Network Camera Server BB HCS301A Geting Started Manual. The Panasonic manuals for Security system are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
Operating Instructions
[For assistance, please call: 1-800-272-7033] 45
2.4 What is IPsec?
IPsec provides security for the transmission of sensitive information over
unprotected networks such as the Internet. IPsec authenticates IP packets
between participating IPsec devices.
This products IPsec Feature
This product can use IPsec in both IPv4/IPv6. This product supports the following
IPsec feature.
ItemSupported Feature
IKEv1Pre-shared Key Method
Phase 1 mode:Main mode*1
*1This product does not...](http://img.usermanuals.tech/thumb/58/72320/w300_bb-hcs301a_en_start_om_d-50.png "Page 51
Operating Instructions
[For assistance, please call: 1-800-272-7033] 45
2.4 What is IPsec?
IPsec provides security for the transmission of sensitive information over
unprotected networks such as the Internet. IPsec authenticates IP packets
between participating IPsec devices.
This products IPsec Feature
This product can use IPsec in both IPv4/IPv6. This product supports the following
IPsec feature.
ItemSupported Feature
IKEv1Pre-shared Key Method
Phase 1 mode:Main mode*1
*1This product does not...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 45 2.4 What is IPsec? IPsec provides security for the transmission of sensitive information over unprotected networks such as the Internet. IPsec authenticates IP packets between participating IPsec devices. This products IPsec Feature This product can use IPsec in both IPv4/IPv6. This product supports the following IPsec feature. ItemSupported Feature IKEv1Pre-shared Key Method Phase 1 mode:Main mode*1 *1This product does not...
Page 52
Operating Instructions 46 IPsec Mode Selection Select transport mode or tunnel mode to access this product. Transport Mode (IPv4 Only) The image is encrypted in the whole way between this product and your PC. In the environment of Windows XP Service Pack 1 or later, transport mode is available only in IPv4. Prepare the following requirements. ItemSupported Feature PCOperating System:Windows XP Service Pack 1 or later Web Browser:Internet Explorer 6.0 or later ISP Service:Services for multiple static...
Page 53
![Page 53
Operating Instructions
[For assistance, please call: 1-800-272-7033] 47
Tunnel Mode (IPv4/IPv6)
An IPsec mode of operation where the entire IP packet including IP header is
authenticated and encrypted. A new IP header is added (protecting the entire
original packet). Both VPN clients and VPN gateways can use this mode.
Note
This product can be accessed only from the PCs under the VPN router. Other
PCs cannot access this product.
Prepare the following requirements.
ItemSupported Feature
PCOperating...](http://img.usermanuals.tech/thumb/58/72320/w300_bb-hcs301a_en_start_om_d-52.png "Page 53
Operating Instructions
[For assistance, please call: 1-800-272-7033] 47
Tunnel Mode (IPv4/IPv6)
An IPsec mode of operation where the entire IP packet including IP header is
authenticated and encrypted. A new IP header is added (protecting the entire
original packet). Both VPN clients and VPN gateways can use this mode.
Note
This product can be accessed only from the PCs under the VPN router. Other
PCs cannot access this product.
Prepare the following requirements.
ItemSupported Feature
PCOperating...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 47 Tunnel Mode (IPv4/IPv6) An IPsec mode of operation where the entire IP packet including IP header is authenticated and encrypted. A new IP header is added (protecting the entire original packet). Both VPN clients and VPN gateways can use this mode. Note This product can be accessed only from the PCs under the VPN router. Other PCs cannot access this product. Prepare the following requirements. ItemSupported Feature PCOperating...
Page 54
![Page 54
Operating Instructions
48
2.5 Encrypt the Camera Image in Transport Mode
This product can encrypt the image using IPsec transport mode.
Note
If you use IPsec, refresh interval slows down.
1.Click [IPsec] on the Setup page.
2.Click Camera in the Transport column.
If you use transport mode in E-mail or FTP transfer, click No. in the Buffer/
Transfer column.
Note
To display Alarm Log, set Alarm or Motion Detection for Trigger Setting
and check [Enable].
3.Enter each parameter in the data field.
The...](http://img.usermanuals.tech/thumb/58/72320/w300_bb-hcs301a_en_start_om_d-53.png "Page 54
Operating Instructions
48
2.5 Encrypt the Camera Image in Transport Mode
This product can encrypt the image using IPsec transport mode.
Note
If you use IPsec, refresh interval slows down.
1.Click [IPsec] on the Setup page.
2.Click Camera in the Transport column.
If you use transport mode in E-mail or FTP transfer, click No. in the Buffer/
Transfer column.
Note
To display Alarm Log, set Alarm or Motion Detection for Trigger Setting
and check [Enable].
3.Enter each parameter in the data field.
The...")
Operating Instructions 48 2.5 Encrypt the Camera Image in Transport Mode This product can encrypt the image using IPsec transport mode. Note If you use IPsec, refresh interval slows down. 1.Click [IPsec] on the Setup page. 2.Click Camera in the Transport column. If you use transport mode in E-mail or FTP transfer, click No. in the Buffer/ Transfer column. Note To display Alarm Log, set Alarm or Motion Detection for Trigger Setting and check [Enable]. 3.Enter each parameter in the data field. The...
Page 55
![Page 55
Operating Instructions
[For assistance, please call: 1-800-272-7033] 49
4.Click [Save] when finished.
New settings are saved.
5.Click [Cancel].
The IPsec page is displayed.
6.Check [Use] in the IPsec column, select an encoding strength, and click
[Save].
SettingDescription
Status Check the box to use this encryption method.
Pre-Shared Key It is the key to use in the authentication of communications.
Enter the same pre-shared key as your PC.
Enter ASCII characters for the host name (see page...](http://img.usermanuals.tech/thumb/58/72320/w300_bb-hcs301a_en_start_om_d-54.png "Page 55
Operating Instructions
[For assistance, please call: 1-800-272-7033] 49
4.Click [Save] when finished.
New settings are saved.
5.Click [Cancel].
The IPsec page is displayed.
6.Check [Use] in the IPsec column, select an encoding strength, and click
[Save].
SettingDescription
Status Check the box to use this encryption method.
Pre-Shared Key It is the key to use in the authentication of communications.
Enter the same pre-shared key as your PC.
Enter ASCII characters for the host name (see page...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 49 4.Click [Save] when finished. New settings are saved. 5.Click [Cancel]. The IPsec page is displayed. 6.Check [Use] in the IPsec column, select an encoding strength, and click [Save]. SettingDescription Status Check the box to use this encryption method. Pre-Shared Key It is the key to use in the authentication of communications. Enter the same pre-shared key as your PC. Enter ASCII characters for the host name (see page...
Page 56
![Page 56
Operating Instructions
50
7.Click [Restart].
8.Set up your PC as it fits to the requirements on page 46.
Set the FTP server or E-mail server to transfer images.
9.Access this product (see page 12).
If you can access this product, the IPsec setup is complete.
Notes
In IPsec communications, IPsec is displayed on the Top page or the
Single Camera page.
If you cannot communicate using IPsec, see page 20 of the
Troubleshooting on the Setup CD-ROM.
See the Panasonic support website at...](http://img.usermanuals.tech/thumb/58/72320/w300_bb-hcs301a_en_start_om_d-55.png "Page 56
Operating Instructions
50
7.Click [Restart].
8.Set up your PC as it fits to the requirements on page 46.
Set the FTP server or E-mail server to transfer images.
9.Access this product (see page 12).
If you can access this product, the IPsec setup is complete.
Notes
In IPsec communications, IPsec is displayed on the Top page or the
Single Camera page.
If you cannot communicate using IPsec, see page 20 of the
Troubleshooting on the Setup CD-ROM.
See the Panasonic support website at...")
Operating Instructions 50 7.Click [Restart]. 8.Set up your PC as it fits to the requirements on page 46. Set the FTP server or E-mail server to transfer images. 9.Access this product (see page 12). If you can access this product, the IPsec setup is complete. Notes In IPsec communications, IPsec is displayed on the Top page or the Single Camera page. If you cannot communicate using IPsec, see page 20 of the Troubleshooting on the Setup CD-ROM. See the Panasonic support website at...
Page 57
![Page 57
Operating Instructions
[For assistance, please call: 1-800-272-7033] 51
2.6 Encrypt the Camera Image in Tunnel Mode
This product can encrypt the image using IPsec tunnel mode.
Notes
Do not set IPsec on the PCs under the VPN router. Communications may
be blocked.
If you use IPsec, refresh interval slows down.
This product can be accessed only from the PCs under the VPN router.
Other PCs cannot access this product.
1.Click [IPsec] on the Setup page.
2.Click Add in the Tunnel column.
3.Enter each...](http://img.usermanuals.tech/thumb/58/72320/w300_bb-hcs301a_en_start_om_d-56.png "Page 57
Operating Instructions
[For assistance, please call: 1-800-272-7033] 51
2.6 Encrypt the Camera Image in Tunnel Mode
This product can encrypt the image using IPsec tunnel mode.
Notes
Do not set IPsec on the PCs under the VPN router. Communications may
be blocked.
If you use IPsec, refresh interval slows down.
This product can be accessed only from the PCs under the VPN router.
Other PCs cannot access this product.
1.Click [IPsec] on the Setup page.
2.Click Add in the Tunnel column.
3.Enter each...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 51 2.6 Encrypt the Camera Image in Tunnel Mode This product can encrypt the image using IPsec tunnel mode. Notes Do not set IPsec on the PCs under the VPN router. Communications may be blocked. If you use IPsec, refresh interval slows down. This product can be accessed only from the PCs under the VPN router. Other PCs cannot access this product. 1.Click [IPsec] on the Setup page. 2.Click Add in the Tunnel column. 3.Enter each...
Page 58
![Page 58
Operating Instructions
52
4.Click [Save] when finished.
New settings are saved.
5.Click [Cancel].
The IPsec page is displayed.
6.Check [Use] in the IPsec column, select an encoding strength, and click
[Save].
SettingDescription
Status Check the box to use this encryption method.
Pre-Shared Key It is the key to use in the authentication of communications.
Enter the same pre-shared key as your VPN router.
Enter ASCII characters for the host name (see page 163).
But [Space], [], [], [&], [] are...](http://img.usermanuals.tech/thumb/58/72320/w300_bb-hcs301a_en_start_om_d-57.png "Page 58
Operating Instructions
52
4.Click [Save] when finished.
New settings are saved.
5.Click [Cancel].
The IPsec page is displayed.
6.Check [Use] in the IPsec column, select an encoding strength, and click
[Save].
SettingDescription
Status Check the box to use this encryption method.
Pre-Shared Key It is the key to use in the authentication of communications.
Enter the same pre-shared key as your VPN router.
Enter ASCII characters for the host name (see page 163).
But [Space], [], [], [&], [] are...")
Operating Instructions 52 4.Click [Save] when finished. New settings are saved. 5.Click [Cancel]. The IPsec page is displayed. 6.Check [Use] in the IPsec column, select an encoding strength, and click [Save]. SettingDescription Status Check the box to use this encryption method. Pre-Shared Key It is the key to use in the authentication of communications. Enter the same pre-shared key as your VPN router. Enter ASCII characters for the host name (see page 163). But [Space], [], [], [&], [] are...
Page 59
![Page 59
Operating Instructions
[For assistance, please call: 1-800-272-7033] 53
7.Click [Restar t].
8.Set up your VPN router as shown below.
To use tunnel mode, you need to set up your VPN router.
SettingDescription
IPsec Check the box to enable IPsec features. If you clear the
box, whole IPsec features will be invalid.
Encoding strength Encoding strength for IPsec can be selected. If you select
[Standard], DES or NULL is valid as an algorithm, and then
the data will become easier to be decrypted.
IKE...](http://img.usermanuals.tech/thumb/58/72320/w300_bb-hcs301a_en_start_om_d-58.png "Page 59
Operating Instructions
[For assistance, please call: 1-800-272-7033] 53
7.Click [Restar t].
8.Set up your VPN router as shown below.
To use tunnel mode, you need to set up your VPN router.
SettingDescription
IPsec Check the box to enable IPsec features. If you clear the
box, whole IPsec features will be invalid.
Encoding strength Encoding strength for IPsec can be selected. If you select
[Standard], DES or NULL is valid as an algorithm, and then
the data will become easier to be decrypted.
IKE...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 53 7.Click [Restar t]. 8.Set up your VPN router as shown below. To use tunnel mode, you need to set up your VPN router. SettingDescription IPsec Check the box to enable IPsec features. If you clear the box, whole IPsec features will be invalid. Encoding strength Encoding strength for IPsec can be selected. If you select [Standard], DES or NULL is valid as an algorithm, and then the data will become easier to be decrypted. IKE...
Page 60
Operating Instructions 54 Set up the IPsec policy as shown below. 9.Access this product (see page 12). If you can access this product, the IPsec setup is complete. Notes In IPsec communications, IPsec is displayed on the Top page or the Single Camera page. If you cannot communicate using IPsec, see page 20 of the Troubleshooting on the Setup CD-ROM. See the Panasonic support website at http://panasonic.co.jp/pcc/products/en/netwkcam/ for the IPsec features. Phase 2ModeQuick mode...