Panasonic Network Camera Server BB HCS301A Geting Started Manual

Operating Instructions
[For assistance, please call: 1-800-272-7033] 15
Setting up the IPv6 Router, your PC, and this Product
Setting up the IPv6 Router
Set up the router as you subscribe to the IPv6 service. If the access from WAN side 
is disabled on the router, enable the TCP packets from WAN side in the packet 
filtering.
Setting up your PC
1.Click [Start][All Programs][Accessories][Command Prompt].
 Command Prompt window is displayed.
2.Enter ipv6 install.
 Succeeded is displayed.
Notes
 If...

Operating Instructions
16
1.3 Viewing Single Camera page
1.Access this product (see page 12).
 The Top page is displayed.
2.Click the [Single] tab at the top of the page.
 When Security Warning window is displayed, click [Yes] (see page 18).
 See page 19 for Security Warning window when using Microsoft® 
Windows® XP Service Pack 2.
3.Close the web browser.
Notes
 When the camera image is not displayed correctly, click [Refresh] at the 
tool bar on the web browser. The image will be refreshed.
...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 17
 To reduce the data traffic, the video can be automatically changed to 
refreshing still images on the General User page (see page 
78).
 To display the Single Camera page directly, add it to the [Favorites] on the 
web browser.
 When the IP address was changed for this product, enter it on the address 
bar.
 Video may not be displayed quickly or audio may not be listened 
immediately. Wait for a while.
 If you use a proxy...

Operating Instructions
18
Security Warning window
To view a video (Motion JPEG) or to use audio feature, ActiveX® Controls must be 
installed. When trying to display a video for the first time, Security Warning window 
will be displayed. When using Windows XP or Windows 2000, log in as an 
administrator to install it.
If you cannot install ActiveX Controls or you cannot see the video in the 
Internet Explorer
 Click [Tools][Internet Options][Security] tab and click [Custom level] on 
the web browser....

Operating Instructions
[For assistance, please call: 1-800-272-7033] 19
Security Warning window on Microsoft Windows XP Service Pack 2
To view a video (Motion JPEG) or to use audio feature, ActiveX Controls must be 
installed.
Follow the steps shown below to install ActiveX Controls.
1.Click the warning displayed above the tabs, and click [Install ActiveX 
Control...].
2.Click [Install]. 

Operating Instructions
20
The Image Output from the Video Output Terminal and the Image 
Displayed on the Web Browser
 The video output terminal outputs the image from the video input terminal as 
it is. The following features are effective only for the image on your web 
browser, and not effective for the image from the video output terminal.
 Digital Zoom (See page 22)
 Click to Center with Digital Zoom (See page 22)
 Snapshot (See page 23)
 Refresh Interval (See page 24)
 Resolution (See page...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 21
The Banner
When this product accesses the Internet, the banner displays product information 
about products or announcements about the latest firmware, etc. from Panasonic. 
Whether or not to display the banner can be set at Banner Display (see page 
123).
Notes
 The banner is displayed when [Yes] is checked for Allow Access from the 
Internet on the Automatic Setup page, or when [Enable] is checked for Auto 
Port Forwarding on the...

Operating Instructions
22
1.3.1 Zooming In and Out
This product has a 10× digital zoom feature.
There are 2 methods of increasing/decreasing the size of the object on the Single 
Camera screen, the Multi Camera screen, and the Buffered Image screen (only 
while playing video):
1.Rotating the mouse wheel 
Rotating the mouse wheel away from you zooms in, and rotating it towards 
you zooms out.
2.Clicking the right mouse button 
Clicking the right mouse button on the upper third of the Single Camera 
screen...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 23
1.3.2 Capturing a Still Image
A still image can be saved on your PC.
1.Select a resolution to display an image.
2.Click the capture image button.
 The camera image opens in another window.
3.Right-click the image, and select [Save Picture As...].
 Save as dialog box is displayed.
4.Specify a folder, and click [Save].
 The camera image is saved in the folder.
5.Click [Close].
Capture Image Button 

Operating Instructions
24
1.3.3 Using Operation Bar
Note
When the image is not displayed soon or the image is not displayed correctly, 
click Refresh button on your browser. The image is updated.
Output 
Control:Controls output signals of the External I/O.
Refresh 
Interval:Sets a refresh interval. (Motion—60-second 
interval)
Resolution:Selects [640 × 480] or [320 × 240] (default) pixels.
Image 
Quality:Selects the image quality.
 [Favor Clarity] optimizes the image for good 
clarity.
 [Standard]...