Panasonic Network Camera Server BB HCS301A Geting Started Manual

Operating Instructions
[For assistance, please call: 1-800-272-7033] 95
7.Select the transfer method, and click [Next>].
 Clicking [

Operating Instructions
96
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033] 97
SettingDescription
Server IP 
Address or 
Host Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the FTP server IP address, set 4 digits (0—255) and 
3 periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name (1—
255 characters).
 You can set IPv6 address.
Po r t N o. Enter a number (1—65535). Usually set to 21.
Login ID*2
*2But [] is not available.
 If your ISP...

Operating Instructions
98
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033] 99
SettingDescription
SMTP Server IP 
Address or Host 
Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the SMTP server IP address, set 4 digits (0—
255) and 3 periods such as 192.168.0.253. But 0.0.0.0 
and 255.255.255.255 are not available. Or set a host 
name (1—255 characters).
 You can set IPv6 address.
Po r t N o. Enter a number (1—65535). Usually set to 25.
POP3 Server IP 
Address or Host 
Name
*1
 If you...

Operating Instructions
100
8.After you confirm the settings and click [Next>], set E-mail notification and click 
[Next>].
 If you select [Enable], the E-mail Notification When Triggered page is 
displayed. Enter the settings seeing page 
98 and page 99.
9.Click [Save] after confirming the settings.
 New settings are saved.
 When finished, Success! is displayed.
Note
If you click [Save], all buffered images on the SD memory card are 
deleted.
SettingDescription
Disable This product does not send an...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 101
10.Click [Go to Trigger page].
 The Trigger page is displayed.
Notes
 If you set a short interval to transfer image to a cell phone, many E-mails 
may be sent to it leading to a large phone bill. Therefore, we recommend 
you to set a long interval. 1 image per minute frequency is recommended.
 Alarm transfer stops its operations until this product finishes all transfers. 
For example, if this product transfers 3 images per minute...

Operating Instructions
102
2.18 Buffering or Transferring Images by Motion 
Detection Signal
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Notes
 A change due to light or wind may detect motions mistakenly.
 Motion detection level is changed depending on resolution, image quality, and 
object situation. Confirm the level by performing motion detection recording.
 Enabling Motion Detection delays the frame rate of this product.
 Objects moving fast may not be detected....

Operating Instructions
[For assistance, please call: 1-800-272-7033] 103
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 
64). 
 Clicking [>Back] takes you back to the previous page.
 Clicking [Cancel] takes you back to the Trigger page without saving 
changes.
SettingDescription
Enable Image 
Buffer/Transfer  Check the box to enable the Trigger setting. Clear the box 
to disable it.
Trigger Selecting...

Operating Instructions
104
5.Set the image settings, and click [Next>].
 Clicking [>Back] takes you back to the previous page.
 Clicking [Cancel] takes you back to the Trigger page without saving 
changes.
SettingDescription
Image 
Resolution  Select image resolution (640 × 480, 320 × 240 (default) or 
160 × 120 pixels) to buffer or transfer. 
Image Quality  Select the image quality.
[Favor Clarity] optimizes for good quality. 
[Standard] offers standard quality. (Default)
[Favor Motion] optimizes...