Panasonic Network Camera Server BB HCS301A Geting Started Manual

Operating Instructions
[For assistance, please call: 1-800-272-7033] 125
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Image Display page].
 The Image Display page is displayed. 

Operating Instructions
126
2.27 Configuring Multiple Images
To view images on the Multi-Camera page, this products or the Panasonic Network 
Cameras IP address and camera name must be configured on the Multi-Camera 
Setup page. These configurations are required to use the Multi-Camera page. Up 
to 12 cameras can be configured.
1.Click [Multi-Camera] on the Setup page.
2.Click Add.
Notes
 If you click the number, the modification page is displayed. The setting can 
be modified or deleted on it.
 If you...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 127
Notes
 Set the local IP address and port number for this product on the same 
LAN.
 If this product is accessed from the Internet, be sure to use the global IP 
address. In this situation, local IP addresses such as 
192.168.
. cannot be used.
4.Click [Save] when finished.
 New settings are saved.
 The Multi-Camera Setup page is displayed.
SettingDescription
Display Check the box to enable the image display.
IP Address*1 or...

Operating Instructions
128
2.28 Specifying Operation Time
The Operation Time page allows you to limit the operation time. The image turns 
to a gray screen outside the operation time.
Notes
 If you wrongly set the time period, your privacy may be seen. Confirm the 
time period after the setup.
 If you access this product as an administrator, you can view the image 
outside the time period.
1.Click [Operation Time] on the Setup page.
2.Click [No.] to set the operation time.
Note
If No. 1—7 are disabled,...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 129
4.Click [Save] when finished.
 New settings are saved.
 The Operation Time page is displayed.
About Operation Time
In the operation time settings, the enabled settings take priority over the disabled 
settings. Therefore, if Monday or Tuesday is disabled in a setting but enabled in 
other settings, this product can be operated on both Monday and Tuesday.
SettingDescription
Enable Check the box to enable the setting. Clear the box...

Operating Instructions
130
2.29 Controlling External Output Terminal
The digital output terminal allows you to control the external devices. You can 
change the initial status of the output signal.
Note
Connect the external devices to this product.
1.Click [External Output] on the Setup page.
2.Click [Save] when finished.
 Clicking [Cancel] cancels your settings without saving changes.
 New settings are saved.
 When finished, Success! is displayed. 
3.Click [Go to External Output Control page].
 The...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 131
2.30 Changing Indicator Display
The Indicator Control page allows you to select Indicator operation. Indicator has 
three options.
Always on
 Turn the indicator on when this product is accessed.
Always off
1.Click [Indicator Control] on the Setup page.
2.Select indicator option.
 Clicking [Cancel] cancels your settings without saving changes.
Notes
 See page 10 for indicator display.
 Selecting [Never turn indicator on] keeps...

Operating Instructions
132
3 Maintenance
3.1 Maintenance page
Maintenance
(1)StatusDisplays the settings and status (see page 133).
(2)Session StatusDisplays information on access to this product (see page 
133).
(3)Alarm LogDisplays alarm logs (see page 134).
(4)RestartRestarts this product (see page 134).
(5)Update FirmwareUpdates the firmware (see page 135).
(6)Save SettingsCreates a configuration file (see page 138).
(7)Load SettingsLoads settings from a configuration file (see page 139).
(8)Reset to...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 133
3.1.1 Confirming the Status
The Status page allows you to check the status of this product. The status 
information provides support for troubleshooting.
Clicking [Status] displays the following page.
Note
See the Panasonic support website at http://panasonic.co.jp/pcc/products/
en/netwkcam/ for details about status information.
3.1.2 Confirming Session Status
The Session Status page displays client information connecting to this...

Operating Instructions
134
3.1.3 Displaying Alarm Logs
Displays up to 50 Alarm Logs in order of time. Old logs will be overwritten by new 
one.
1.Click [Alarm Log] on Maintenance page.
2.Alarm Logs are displayed.
Note
If this product is restarted, all alarm logs are deleted.
3.1.4 Restarting this Product
The Restart page can restart this product. This product restarts by disconnecting 
the power cord from the outlet and reconnecting it again.
Note
When this product restarts, the buffered images and alarm...