Panasonic Network Camera Server BB HCS301A Geting Started Manual

Operating Instructions
[For assistance, please call: 1-800-272-7033] 105
6.Set the image buffer frequencies, and click [Next>].
Note
Due to the network environment, object, number of accesses, enabling IPsec, 
this product may not record the numbers of images as you set. In this case, set 
the image buffer frequencies longer.
 Clicking [Cancel] takes you back to the Trigger page without saving 
changes.
 Clicking [

Operating Instructions
106
7.Select the transfer method, and click [Next>].
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033] 107
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
108
SettingDescription
Server IP 
Address or 
Host Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the FTP server IP address, set 4 digits (0—255) and 
3 periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name (1—
255 characters).
 You can set IPv6 address.
Por t  N o. Enter a number (1—65535). Usually set to 21.
Login ID*2
*2But [] is not available.
 If your ISP requires a login ID, set it (0—63 characters)....

Operating Instructions
[For assistance, please call: 1-800-272-7033] 109
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
110
SettingDescription
SMTP Server IP 
Address or Host 
Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the SMTP server IP address, set 4 digits (0—
255) and 3 periods such as 192.168.0.253. But 0.0.0.0 
and 255.255.255.255 are not available. Or set a host 
name (1—255 characters).
 You can set IPv6 address.
Por t  N o. Enter a number (1—65535). Usually set to 25.
POP3 Server IP 
Address or Host 
Name
*1
 If you set the POP3 server IP address, set 4 digits...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 111
8.After you confirm the settings and click [Next>], set E-mail notification and click 
[Next>].
 If you select [Enable], the E-mail Notification When Triggered page is 
displayed. Enter the settings seeing page 
109 and page 110.
9.Click [Save] after confirming the settings.
 New settings are saved.
 When finished, Success! is displayed.
Note
If you click [Save], all buffered images on the SD memory card are deleted....

Operating Instructions
112
10.Click [Go to Trigger page].
 The Trigger page is displayed.
Notes
 If you set a short interval to transfer image to a cell phone, many E-mails 
may be sent to it leading to a large phone bill. Therefore, we recommend 
you to set a long interval. 1 image per minute frequency is recommended.
 Motion Detection transfer stops its operations until this product finishes all 
transfers. For example, if this product transfers 3 images per minute and 
6 images in total, the Motion...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 113
2.19 Formatting the SD memory card
You can record camera images to the SD memory card (customer-provided). 
Before you record the camera image, you need to format the SD memory card.
Note
 You can confirm the SD memory capacity on the Status page (see page 
133).
1.Insert the SD memory card (see page 165).
2.Click [Trigger] on the Setup page.
3.Click [Format].
4.Click [OK] on the confirmation window.
 Format is complete.
5.Click...

Operating Instructions
114
2.20 Stopping the SD Memory Recording
After you stop the SD memory recording, remove the SD memory card.
Notes
 You can confirm the SD memory capacity on the Status page (see page 
133).
 If this product is restarted (see page 134), the SD memory recording 
starts again.
 If you remove the SD memory card and insert it again (see page 165), the 
SD memory recording starts again.
1.Click [Trigger] on the Setup page.
2.Click [SD video recording stop].
3.Click [OK] on the...