Panasonic Network Camera Server BB HCS301A Geting Started Manual

Operating Instructions
[For assistance, please call: 1-800-272-7033] 85
7.Select the transfer method, and click [Next>].
 Clicking [

Operating Instructions
86
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033] 87
SettingDescription
Server IP 
Address or 
Host Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the FTP server IP address, set 4 digits (0—255) and 
3 periods such as 192.168.0.253. But 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name (1—
255 characters).
 You can set IPv6 address.
Po r t N o. Enter a number (1—65535). Usually set to 21.
Login ID*2
*2But [] is not available.
 If your ISP...

Operating Instructions
88
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033] 89
SettingDescription
SMTP Server IP 
Address or Host 
Name
*1
*1But [Space], [], [], [&], [] are not available.
 If you set the SMTP server IP address, set 4 digits (0—
255) and 3 periods such as 192.168.0.253. But 0.0.0.0 
and 255.255.255.255 are not available. Or set a host 
name (1—255 characters).
 You can set IPv6 address.
Po r t N o. Enter a number (1—65535). Usually set to 25.
POP3 Server IP 
Address or Host 
Name
*1
 If you...

Operating Instructions
90
8.Confirm the settings, and click [Save].
 New settings are saved.
 When finished, Success! is displayed.
9.Click [Go to Trigger page].
 The Trigger page is displayed.
Notes
 If you click [Save], all buffered images on the SD memory card are 
deleted.
 If you are buffering images on the internal memory, the following 
operations also delete all buffered images.
– Turning off this product.
– Saving the Date and Time page.
– Restarting, updating firmware or resetting this...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 91
2.17 Buffering or Transferring Images by Alarm 
Signal
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Notes
 If you are recording images to the SD memory card, refresh interval slows 
down.
 You need to attach the alarm to this product when using this feature.
1.Click [Trigger] on the Setup page.
2.Click No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Alarm] for trigger,...

Operating Instructions
92
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 
64).
 Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033] 93
5.Set the image settings, and click [Next>].
 Clicking [].
Note
Due to the network environment, object, number of accesses, enabling IPsec, 
SD memory recording, this product may not record the numbers of images as 
you set. In this case, set the image buffer frequencies longer. For the SD 
memory recording, 1 image per second setting is recommended.
SettingDescription
Image 
Resolution Select image resolution (640 × 480, 320 × 240...

Operating Instructions
94
 Clicking [