Panasonic Network Camera Kx Hcm280 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 71
Instructions for the data fields
Top Page•Top Page title can be changed. Enter the new title.
•Refer to unavailable character set 1 on page 105 but [space] 
is available.
•Refer to displayable character set on page 106.
•Network Camera picture on Top Page can be changed.
Enter the URL (http://) to display the picture on the specified 
web site.
•Only [space] and [] are unavailable in the ASCII...

Operating Instructions
72
3.6.7 Image Transfer
Image Transfer window can set the Image Transfer feature. Network Camera can 
buffer images and send the images via e-mail or FTP. The request to send the 
image is initiated by a contact closure from the external sensors/devices 
connected to the External I/O using the Alarm mode. The external sensors/
devices are customer provided. The images can also be sent in the interval of time 
using the Timer mode. Make sure Date and Time has been configured. Refer...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 73
Non Transfer mode
Non Transfer mode enables [Start Capture] on the operation bar to buffer the 
image on the Single Camera screen. Refer to page 51. Capture Control can lock 
[Start Capture] on the operation bar to prevent the user from capturing the 
Buffered Image. Click [Clear Buffered images] to clear the buffered image. 
[Clear Buffered images] does not save the parameters. 
1.Click [Image...

Operating Instructions
74
Transfer in the Alarm Mode
The Alarm mode can transfer an image via e-mail or FTP when the alarm trigger 
is active. To activate the alarm trigger, the External Sensor Input of External I/O 
must be connected with the external sensors/devices. The Alarm mode can send 
the e-mail without transferring the image. The Alarm mode uses the Network 
Camera internal clock. Make sure Date and Time has been configured. Refer to 
page 64 about Date and Time.
1.Click [Alarm] on Image...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 75
Instructions for the data fields
a.External Sensor Input of External I/O activates the alarm trigger. Refer 
to page 103.
b.Active Time of Trigger
The active trigger time can be set in the primary time and the 
secondary time. The secondary time is the supplement of the primary 
time.
Always: always activates the alarm trigger.
Operational between: Sets the start and stop time of the primary time. 
The...

Operating Instructions
76
a.Selects Transfer Method.
Non Transfer without Memory Over Write: 
Image buffering will stop when the internal memory is full.
Non Transfer with Memory Over Write: 
Buffered image will overwrite the older image data when the internal 
memory is full.
FTP: Enters the server address*
1 or Host Name*2, Port number (1—
65535), Login ID*2 and password*2 to access the FTP server and 
upload file name*2 including full path. Time in 24 h mode is attached on 
the upload file name.
Login...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 77
Selects [Over Write...] to overwrite the transferred image or [Add 
time...] to save each transferred image.
Data transfer method: 
Use [Passive Mode] normally. If FTP does not work properly, ask your 
ISP or network administrator about the transferring mode of FTP 
server. [Passive Mode] or [Active Mode] is available.
b.Mail: Sets the SMTP and POP3 server address*1 or Host Name*2, 
Login ID*2 and...

Operating Instructions
78
Setting Example
b.a.
c.
d.
e.
f. 

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 79
Setting explanation
a.The active time of trigger is set between 9:00 AM to 6:00 PM from 
Monday to Friday. 
When the alarm occurs in the setting time, the images are transferred 
to FTP server, and the notification is sent to the specified user via e-
mail.
The alarm trigger is on when the sensor signal is changed to the 
[Rising] (GND to Open High) of External Sensor Input of External I/O.
b.The...

Operating Instructions
80
Transfer in the Timer Mode
The timer mode can be activated by entering the active time, the image setting, 
frequency setting and the transfer method on Image Transfer window. Buffered 
Image can also be transferred via e-mail or FTP. The timer mode uses the Network 
Camera internal clock. Make sure Date and Time has been configured. Refer to 
page 64 about Date and Time.
1.Click [Timer] on Image Transfer window.
b.
c.
d.
e. a.