Panasonic Network Camera Kx Hcm280 Operating Instructions

Operating Instructions
[ F or  a ss is t an ce ,  p le a se  ca l l:  1 - 80 0 - 27 2- 7 0 33 ]                                  1 1 1
No ItemsFactory Default
valueIndispensable setting Note5 Top View Image320 x 240 - 160 x 120, 320 x 240, 640 x 480
SettingImage Quality Standard -Favor Clarity, Standard,
Favor Motion
Refresh Interval
30 s-10, 15, 20, 25, 30,45 s,
1, 2, 3, 5 min
320 x 240 - 160 x 120,320 x 240
Image Quality Standard -Favor Clarity, Standard,
Favor Motion
5. Limit time of Continuous Motion...

Operating Instructions
112
No ItemsFactory Default
valueIndispensable setting Note6 1. Alarm5.
Non Transfer without Memory Over Write
Non Transfer with Memory Over Write
Selected - -Not-selected - -
FTP Not-selected - -
Server Address or
Host Name[Blank] Required when using FTP
Required when using FTP
Required when using FTP(*1) or (*3) 1 to 255 CharactersPort No. (Usually Use 21) 21Login ID [Blank] If necessary
If necessary(*3) 0 to 63 CharactersPassword [Blank] (*3) 0 to 63 CharactersUpload File Name...

Operating Instructions
[ F or  a ss is t an ce ,  p le a se  ca l l:  1 - 80 0 - 27 2- 7 0 33 ]                                  1 1 3
No ItemsFactory Default
valueIndispensable setting Note
1. TimerAlways - -
Start time 00:00:00 - -Stop time 23:59:59 - -Day-of-the-week setting All checked - -(2) Secondary Time No check - -
320 x 240 - 160 x 120, 320 x 240, 640 x 480
(2) Image Quality Standard -Favor Clarity, Standard,
Favor MotionFrequency1 Image/Hour -
1—30
(2) Secondary Image Buffer 
Frequency1...

Operating Instructions
114
No ItemsFactory Default
valueIndispensable setting Note71. White Balance AutoAuto, Fixed (Indoor/Fluorescent_1/
Fluorescent_2/Outdoor), Hold
Camera
Setup
2. Power Line Frequency 60 Hz 60 Hz, 50 Hz
3. Brightness Control
4. Pan/Tilt/Preset ControlEnable
Enable-
- - -
-
-5. Preset Program Control Enable - -
8 Multi-Camera6. Zoom Control Enable - -
7. Focus Control Enable -
-
-
-
Required when using Multi-Camera-8. Pan Range (Minimum) -175 degree -175 — +175 degree, current 
-175 —...

Operating Instructions
[ F or  a ss is t an ce ,  p le a se  ca l l:  1 - 80 0 - 27 2- 7 0 33 ]                                  1 1 5
No ItemsFactory Default
valueIndispensable setting Note
-
10 Indicator Control
1. Turn on the Indicator during Power ON
Selected
1. Turn on the Indicator during Camera access
Not-selected - --
1. Turn off the Indicator always Not-selected - -
(*1): Address must be composed of four numeral characters (0 to 255) and divided with 3 dots, such as 192.168.0.253. (Cannot use...

Operating Instructions
116
5.3 Specifications
Network Camera Specifications
Other SpecificationsItem Description
Pan/Tilt Angle Pan: -175° to +175°, 
Tilt: -120° to 0° (On the table)/
0° to +90° (On the ceiling)
Sensor Type 1/4-inch CCD (Interlace type)
Number of Pixels 380,000 pixels (Effective Pixels)
Illumination 3—100,000 lx
White Balance Auto/Manual/Hold
Focus Auto/Manual (40 steps)
Zoom 21x Optical Zoom (10 steps)
Minimum Object Distance Wide: 5 mm (0.2 inches)
Tele: 1 m (40 inches)
Caliber Ratio...

Operating Instructions
[ F or  a ss is t an ce ,  p le a se  ca l l:  1 - 80 0 - 27 2- 7 0 33 ]                                  1 1 7
Message Transferring Condition When detecting the alarm
Message Transferring Method SMTP
Image Transferring Condition Timer: Day of the Week/Hour/Minute/Second
Alarm: External Sensor Input
Image Transferring Method SMTP, FTP
Interface 10Base-T/100Base-TX Ethernet RJ-45 connector 
x 1
External I/O*
3External Sensor Input x 1
External Device Control Output x 1
Indicator...

Operating Instructions
118
*4Scan lines may deviate when viewing moving objects with resolution at 640 x 
480 because of the interlace-type CCD. Selecting 320 x 240 offers the good 
compromise between speed and resolution. 

Operating Instructions
[ F or  a ss is t an ce ,  p le a se  ca l l:  1 - 80 0 - 27 2- 7 0 33 ]                                  1 1 9
5.4 Troubleshooting
About Network Camera Setup
Problem Cause and Remedy
When Setup 
CD-ROM 
cannot find 
Network 
Camera.•Reconnect the AC adaptor if installation is not completed within 
20 minutes.
•Do not connect Network Camera over a broadband router. 
Setup program cannot detect Network Camera.
•If IP address is not assigned to the PC, setup program cannot 
find...

Operating Instructions
120
When Top Page 
does not 
appear.•Enter the correct IP address on the web browser.
•IP address and Subnet Mask of the PC and the Network 
Camera must be in the same class of the private IP address on 
the LAN. Refer to page 25.
•The network congestion prevents Top Page from appearing 
quickly. Wait for a while.
•A proxy server may prevent you from connecting directly to 
Network Camera, set up not to use the proxy server. Refer to 
page 26 for details.
•When Top Page does not...