Panasonic Network Camera Kx Hcm280 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 81
Instructions for the data fields
a.Buffers or transfers by the timer trigger.
b.Active Time of Trigger
Always: always activates the timer trigger. The timer trigger interval 
can be set in e. Image Buffer Frequency Setting. 
Operational between: Sets the start and stop time of the primary time. 
The day of the week can be set by checking. If the setting time passes 
over midnight, check the check box...

Operating Instructions
82
a.Selects Transfer Method.
Non Transfer without Memory Over Write: 
Image buffering will stop when the internal memory is full.
Non Transfer with Memory Over Write: 
Buffered image will overwrite the older image data when the internal 
memory is full.
[Primary] or [Secondary] on the operation bar can be displayed to 
view the Buffered Image screen in Non Transfer setting. 
FTP: Enters the server address*
1 or Host Name*2, Port number (1—
65535), Login ID*2 and password*2 to...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 83
Over write setting: 
Selects [Over Write...] to overwrite the transferred image or [Add 
time...] to save each transferred image.
Data transfer method: 
Use [Passive Mode] normally. If FTP does not work properly, ask your 
ISP or network administrator about the transferring mode of FTP 
server. [Passive Mode] or [Active Mode] is available.
b.Mail: Sets the SMTP and POP3 server address*1 or Host Name*2,...

Operating Instructions
84
3.6.8 Camera Setup
Camera Setup window sets White Balance and Power Line Frequency. You can 
lock the Brightness, Pan/Tilt/Preset, Preset Program, Zoom and Focus features. 
You can also select the Pan Range and Tilt Range.
1.Click [Camera Setup] on Setup Page.
2.Select the each parameter in the proper data field. Click [Save] when finished.
•The lens moves to the home position you have registered.
•Click [Cancel] to quit the current settings. The window returns to Setup 
Page...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 85
Instructions for the data fields
White Balance Notes
•The wrong White Balance setting will cause Network 
Camera to display colors improperly. In most cases Auto is 
suggested.
•White Balance is also registered in preset programming.
Power Line 
FrequencyIt can select Flicker Correction by power line frequency.
• 60 Hz (default) • 50 Hz
Select 60 Hz in the United States.
Brightness 
ControlBrightness...

Operating Instructions
86
Specifying the Pan/Tilt range
1.Start up the web browser and access the Single Camera screen.
2.Start up another web browser and access Camera Setup window.
3.Align the Single Camera screen and Camera Setup window from side to side.
4.Adjust the Pan operation on the Single Camera screen and select [Current] in 
the minimum value data field of the Pan range on Camera Setup window. The 
data field refreshes to read the current value of the Pan range.
5.Specify the each home...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 87
3.6.9 Multi-Camera
Multi-Camera window enables the setting of Multi-Camera screen. Camera 
Name and IP address of each Network Camera must be entered to view the Multi-
Camera screen. Registering IP addresses of the other Network Camera enables 
you to view on the Multi-Camera screen. Clicking Camera Name of Network 
Camera on the Multi-Camera screen accesses the Single Camera screen to 
control the...

Operating Instructions
88
2.Select/Enter the each parameter. Click [Save] when finished.
•Click [Cancel] to quit the current settings. The window returns to Setup 
Page without saving the parameters.
*
1 Refer to IP addressing on page 105.
*
2 Refer to unavailable character set 1 on page 105 
but [:] is available.
*
3 Refer to unavailable character set 1 on page 105 and refer to displayable
character set on page 106.Instructions for the data fields
Enable check boxThe checked camera image can be seen on...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 89
3.6.10 External Output Control
External Output Control window enables the External Device Control Output 
signal to activate the external sensors/devices. (Open or Short to GND) The 
network administrator should set up this setting. 
Note
Refer to page 103 for Interfacing to the External I/O.
1.Click [External Output Control] on Setup Page.
2.Check [Open] means the External Device Control Output...

Operating Instructions
90
3.6.11 Indicator Control
Indicator Control window allows you to select Indicator operation. Indicator 
operation has three patterns.
•Always on
•Turns on when accessing Network Camera
•Always off
Notes
•Indicator can be controlled in case the administrator does not want to 
draw attention to Network Camera. This may be desirable when used 
for security applications.
•Refer to page 14 for the Indicator color indication.
1.Click [Indicator Control] on Setup Page.
2.Select the...