Panasonic Network Camera Kx Hcm280 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 41
Click to Center
When you click the certain point on the Single Camera screen, the point is 
centered on the image.
1.Put the cursor on the point which should be centered and click it.
2.The clicked point is centered.
Notes
Click to Center does not move over the end of corner when the Pan/Tilt 
range reaches the end. The Pan/Tilt operation can be locked by Pan/Tilt 
control on page 84.
The position...

Operating Instructions
42
3.3.1 Using Operation Bar
Operation bar controls the general use of Network Camera. The following sections 
describe the general way of using it.
(1) End Display: When Pan/Tilt operation has reached the 
end, Left End, Right End, Up End or Down End 
appears. When Zoom/Focus operation has reached the 
end, Wide End, Tele End, Near End or Far End appears.
Locked Display: Pan/Tilt/Preset, Brightness Control, 
Preset program, Zooming and Focusing can be locked. 
Locked appears when...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 43
3.3.2 Using Pan/Tilt Operation
Pan/Tilt scan buttons automatically move the lens horizontally from -175° to +175° 
and vertically from -120° to 0° in mounting on the table and from 0° to 90° in 
mounting on the ceiling, and the lens returns to the current position. Use Click to 
Center feature to stop scanning. Each surrounding arrow of Pan/Tilt moves the 
lens Up, Down, Right, Left, and the home...

Operating Instructions
44
Notes
• Pan/Tilt Range can be selected on Camera Setup window on page 84.
• When the power is on, do not manually revolve the Pan/Tilt. Revolving it 
forcedly or moving it manually by some mistake may damage the Pan/Tilt 
operation, or change the registered Pan/Tilt positions from actual ones. 
Restart Network Camera when the latter case happens. 
• Do not touch the lens. Touching it can remove the protective coating from the 
lens. Fingerprints, dust, stains, etc. on the lens...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 45
3.3.3 Zooming in and out
Zoom button increases or decreases the size of the object on the Single Camera 
screen. Tele button zooms in, and Wide button zooms out. Zooming feature has 
10 steps. The magnifying capacity of the optical lens is 21x.
Note
Zooming can be locked on Camera Setup window on page 84.
Wide button
Tele button 

Operating Instructions
46
3.3.4 Automatic and Manual Focusing
Focus button adjusts the focus. Network Camera has Automatic and Manual 
Focusing features. AF (Automatic Focus) button automatically allows the lens to 
focus on objects. Manual focusing starts by pressing Near or Far button. Near 
button enables the lens to shorten the focal distance, and Far button lengthens it, 
manually. Manual focusing feature has 40 steps.
Notes
•Automatic Focusing can be locked on Camera Setup window on page 84....

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 47
Notes
•Check [Enable] for Active scripting of web browser when Near or Far button 
does not work in manual focusing. Refer to page 124.
•The image may be out of focus, if it is too near, or depending on the zoom 
position. Move the object off Network Camera, or adjust the zoom position. 
Minimum object distance
Tele Wide
    5 mm
(0.2 inches)       1 m
(40 inches) 

Operating Instructions
48
3.3.5 Setting Preset Positioning and Home Positioning
Preset Positioning and Home Positioning allow you to fix the lens on a specific 
point. Lens moves to the preset/home position when clicking each registered 
button. Blue/White buttons mean Registered/Not registered. Camera Setup 
window on page 84 can lock the Preset/Home Positioning features. Once preset 
buttons and home positioning button are registered in manual focusing, they will 
be registered in manual focusing....

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 49
Registering or modifying the preset buttons or home position button
1) Click [Program]. Red cancel button appears.
•[Cancel] returns to the Single Camera screen.
2) Move the lens to a desired position using Pan/Tilt 
operation.
3) Select the preset number or home position button to 
register or modify.
•After registering or modifying the home 
position button, Success! appears on the 
display. Go to...

Operating Instructions
50
Deleting the preset buttons
1) Click [Program]. Red cancel button appears.
•[Cancel] links to the Single Camera 
screen without deleting.
2) Select the preset number to delete.
3) Click [Delete].
•[Cancel] links to the Single Camera 
screen without deleting.
4) Deleted preset button turns white.
•Go back to step 2 to delete other preset 
buttons.
5) Click [Cancel] when finished.
2)
3)
1)
4)
5)