Panasonic Network Camera Kx Hcm280 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 51
3.3.6 Viewing Buffered Image Screen
Buffered Image screen can be viewed by clicking [Viewer] on the operation bar. 
Buffered Image is saved in the internal memory of Network Camera by clicking 
[Start Capture]. Alarm/Timer mode in the Image Transfer on page 72 can also 
buffer the image. Buffered Image is erased by power off, restarting, Update 
Firmware, resetting to Factory Default and when Image...

Operating Instructions
52
Notes
•The refresh interval becomes longer as more clients access Network 
Camera.
•The image resolution, image quality and object situation affect the 
number of frames in the Buffered Image.
•If internal memory is filled after clicking [Start Capture], the image 
buffering will stop automatically.
To save still images on your PC
The PC can save still images taken by JPEG - Regularly Refresh and Buffered 
Image. The refresh interval of JPEG - Regularly Refresh should be 30...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 53
3.4 Multi-Camera Screen
Four separate Network Camera images can be displayed in both Motion JPEG 
and JPEG - Regularly Refresh. The Pan/Tilt operation cannot be operated on the 
Multi-Camera screen. You can jump to each individual Network Camera by 
clicking Camera Name. The Single Camera screen has the Pan/Tilt operation, 
which can reflect on the Multi-Camera screen.
Refer to page 87 for how to...

Operating Instructions
54
3.5 Viewing Images from Network Camera on TV
You can view images from Network Camera on TV and to record them on 
videotapes.
Analog Video Output terminal
(ø3.5 Mini Plug 1Vp-p, 75   )
Video cable (Customer provided)
To Video Input terminal Ω   

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 55
3.6 Setup Page
Setup Page controls all features of Network Camera. Authentication window 
protects the Network Camera security. It enables only administrator to access 
Setup Page by entering ID and Password.
Enter http://IP Address (or URL) 
:Port No./config.html on the web browser 
and press [Enter]. When port number is 80 (default), you do not need to enter port 
number. Then Setup Page appears....

Operating Instructions
56
Setup Page
Note
Firmware Version number indicated on Setup Page is important for your future 
support of Network Camera.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
Version
number 

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 57
Item Description
(1) Go to Top PageLinks to Top Page. You can access Single/Multi-
Camera screen in Motion JPEG/JPEG - Regularly 
Refresh. Refer to page 59.
(2) NetworkConfigures the network setting (Static/DHCP, 
Default Gateway, Port Number, DNS, DDNS and 
Bandwidth). Refer to page 60.
(3) Name/TimeSets the Camera Name on the Single Camera 
screen. Date and Time is used in the Alarm/Timer 
mode in...

Operating Instructions
58
(9) Multi-CameraThe Multi-Camera screen needs to set up these 
parameters. Enter the Camera Names and IP 
addresses of each Network Camera. The Multi-
Camera can display up to four images in a window. 
Refer to page 87.
(10) External Output 
ControlSets the External Device Control Output setting to 
attach external sensors/devices. (Open or Short to 
GND) Refer to page 89 and page 103.
(11) Indicator ControlSets Indicator operation. Indicator will be turned on 
in the default....

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 59
3.6.1 Go to Top Page
Click [Go to Top Page] on Setup Page. You can access the Single Camera and 
Multi-Camera screen in Motion JPEG/JPEG-Regularly Refresh.
Click the language to change the display. 

Operating Instructions
60
3.6.2 Network
Network window configures network parameters. Restart Network Camera to 
make the parameters effective.
•You can set disable Configuration window from the Setup CD-ROM for the 
security by clearing the check.
1.Click [Network] on Setup Page.