Panasonic Network Camera Kx Hcm280 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 11
1.1.3 Authentication—System Security Feature
Authentication window requires you to enter the administrator/general user ID 
and password for security. Password security can prevent unregistered users/
intruders from accessing your image from their web browsers. Authentication 
windows are not displayed in the default. Refer to page 66 for setting up 
Authentication window, the administrator ID and the...

Operating Instructions
12
1.2 Included Accessories
The following items are provided with Network Camera. Additional pieces can be 
ordered by calling 1-800-332-5368.
Notes
If any items are missing, contact the dealer immediately.
The order numbers listed above are subject to change without notice.
Save the original carton and packing materials for future shipping and 
transportation of the unit.
AC Adaptor—1 pc.
Order No. PSLP1242ZAC Cord—1 pc.
Order No. PSJA1069Z 
Ceiling Mounting Cover—1 pc.
Order...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 13
Setup CD-ROM
The setup program simplifies Network Camera installation. Adobe
® Acrobat® 
Reader 4.05 or later enables you to see the Operating Instructions on the Setup 
CD-ROM. If Adobe Acrobat Reader is not installed on the PC, double-click 
ar405eng.exe. Refer to ReadmeEng.txt for the directory and file structure of 
the Setup CD-ROM.
Notes
Do not scratch, smudge, write or label either surfaces of...

Operating Instructions
14
1.3 Camera Feature Locations
1.3.1 Front View
Indicator
Indicator can be controlled on Indicator Control window on page 90. Color 
indications are shown below.
*
1 Orange indicator will continue blinking in the DHCP setting.
*2 Refer to page 122 for the red blinking.
Lens and Pan/Tilt operation
Operation bar on the Single Camera screen can operate the Pan/Tilt. The Pan/Tilt 
moves the lens horizontally from -175° to +175° and vertically from -120° to 0° in 
mounting on the table...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 15
1.3.2 Rear View
1.3.3 Bottom View
Ethernet port
(10/100 Base-TX)
(Refer to page 20.)
Analog Video Output
terminal (VIDEO OUT)
(Refer to page 54.)External I/O
(I/O)
(Refer to page 103.)
DC IN jack
(Refer to page 20.)
Hook for AC 
Adaptor Cord
(Refer to page 20.)
FACTORY DEFAULT
RESET button
(Refer to page 109.)
Hole for Ceiling Plate A
(Refer to page 100.)MAC Address and Serial 
Number are indicated on...

Operating Instructions
16
Section 2
Network Camera Setup 

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 17
2.1 Installation Procedure
Select the Network Camera configuration type. (Page 18—Page 19)
Connect Network Camera for installation. (Page 20)
Prepare the network parameters for Network Camera. (Page 21—Page 22)
Check the proxy server setting. (Page 26—Page 27)
Set up Network Camera with Setup CD-ROM. (Page 28—Page 31)
Confirm the Network Camera Access from the Internet. (Page 32—Page 33)
Mount Network...

Operating Instructions
18
2.2 Network Camera Configuration Type
Network Camera can be connected over the LAN/Intranet and the Internet. Select 
from the four Network Camera configuration types. Network parameters differ 
depending on the Network Camera configuration type.
[Type 1]—LAN/Intranet Connection with an Ethernet 
Switching Hub
Network Camera can be installed on the LAN/Intranet. 
*
1 Network traffic can be improved by using the Ethernet switching hub.
[Type 2]—Internet Connection with a...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 19
[Type 3]—Internet Direct Connection with a Modem
Network Camera can be installed alone without PC on the network. When you set 
up Network Camera in [Type 3], connect Network Camera temporarily in [Type 
1], [Type 2] or [Type 4].
Note
Some xDSL services use PPPoE. Network Camera does not support PPPoE. 
If the Internet connection requires PPPoE, connect with the broadband router 
supporting PPPoE like...

Operating Instructions
20
2.3 How to turn on Network Camera for 
Installation
Network Camera powers up when connecting AC plug to the power outlet.
Notes
Do not hold or touch the Pan/Tilt as it starts moving when connecting AC 
plug to the power outlet.
AC adaptor is used as the main disconnect device, so ensure that the 
power outlet is located/installed near the equipment and is easily 
accessible.
Use only specified Panasonic AC adaptor PSLP1242 (Order No. 
PSLP1242Z).
When you set up Network...