Panasonic Network Camera Kx Hcm250 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 71
Non Transfer mode
Non Transfer mode enables[Start Capture]on the operation bar to buffer the
image on the Single Camera screen. Refer to page 50. Capture Control can lock
[Start Capture]on the operation bar to prevent the user from capturing the
Buffered Image. Click[ClearBuffered images]to clear the buffered image.
[ClearBuffered images]does not save the parameters.
1.Click[Image Transfer]on Setup Page.
2.Select the each parameter....

Operating Instructions
72
Transfer in the Alarm Mode
TheAlarmmodecantransferanimageviae-mailorFTPwhenthealarmtrigger
is active. To activate the alarm trigger, the External Sensor Input of External I/O
must be connected with the external sensors/devices. The Alarm mode can send
the e-mail without transferring the image. The Alarm mode uses the Network
Camera internal clock. Make sure Date and Time has been configured. Refer to
page 62 about Date and Time.
1.Click[Alarm]onImage Transfer window.
c. b. a....

Operating Instructions
[For assistance, please call: 1-800-272-7033] 73
Instructions for the data fields
a.External Sensor Input of External I/O activates the alarm trigger. Refer
to page 102.
b.Active Time of Trigger
The active trigger time can be set in the primary time and the
secondary time. The secondary time is the supplement of the primary
time.
Always: always activates the alarm trigger.
Operational between: Sets the start and stop time of the primary time.
The day of the week can be set by...

Operating Instructions
74
a.SelectsTransfer Method.
Non Transfer without Memory Over Write:
Image buffering will stop when the internal memory is full.
Non Transfer with Memory Over Write:
Buffered image will overwrite the older image data when the internal
memory is full.
FTP: Enters the server address*
1or Host Name*2, Port Number (1—
65535), Login ID*2and password*2to access the FTP server and
upload file name*2including full path. Time in 24 h mode is attached on
theuploadfilename.
Login timing:...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 75
Over write setting:
Selects [Over Write...] to overwrite the transferred image or [Add
time...] to save each transferred image.
Data transfer method:
Use [Passive Mode] normally. If FTP does not work properly, ask your
ISP or network administrator about the transferring mode of FTP
server. [Passive Mode] or [Active Mode] is available.
b.Mail: Sets the SMTP and POP3 server address*1or Host Name*2,
Login ID*2and Password*2.
From...

Operating Instructions
76
Setting Example
b.a.
c.
d.
e.
f. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 77
Setting explanation
a.The active time of trigger is set between 9:00 AM to 6:00 PM from
Monday to Friday.
When the alarm occurs in the setting time, the images are transferred
to FTP server, and the notification is sent to the specified user via e-
mail.
The alarm trigger is on when the sensor signal is changed to the
[Rising] (GND to Open High) of External Sensor Input of External I/O.
b.The secondary time is set inactive.
c.The...

Operating Instructions
78
Transfer in the Timer Mode
The timer mode can be activated by entering the active time, the image setting,
frequency setting and the transfer method onImage Transfer window.Buffered
Image can also be transferred via e-mail or FTP. The timer mode uses the Network
Camera internal clock. Make sure Date and Time has been configured. Refer to
page 62 about Date and Time.
1.Click[Timer]on Image Transfer window.
b.
c.
d.
e. a. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 79
Instructions for the data fields
a.Buffers or transfers by the timer trigger.
b.Active Time of Trigger
Always: always activates the timer trigger. The timer trigger interval
can be set ine. ImageBuffer Frequency Setting.
Operational between: Sets the start and stop time of the primary time.
The day of the week can be set by checking. If the setting time passes
over midnight, check the check box of only the day of start time. Start...

Operating Instructions
80
a.SelectsTransfer Method.
Non Transfer without Memory Over Write:
Image buffering will stop when the internal memory is full.
Non Transfer with Memory Over Write:
Buffered image will overwrite the older image data when the internal
memory is full.
[Primary]or[Secondary]on the operation bar can be displayed to
view the Buffered Image screen in Non Transfer setting.
FTP: Enters the server address*
1or Host Name*2, Port Number (1—
65535), Login ID*2and password*2to access the FTP...