Panasonic Network Camera Kx Hcm250 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 111
No ItemsFactory Default
valueIndispensable setting Note6 1. Alarm
5.
Non Transfer without Memory Over Write
Non Transfer with Memory Over Write
Selected - -Not-selected - -
FTP Not-selected - -
Server Address or
Host Name[Blank] Required when using FTP
Required when using FTP
Required when using FTP(*1) or (*3) 1 to 255 CharactersPort No. (Usually Use 21) 21Login ID [Blank] If necessary
If necessary(*3) 0 to 63 CharactersPassword...

Operating Instructions
112
No ItemsFactory Default
valueIndispensable setting Note
1. TimerAlways - -
Start time 00:00:00 - -Stop time 23:59:59 - -Day-of-the-week setting All checked - -(2) Secondary Time No check - -
320 x 240 - 160 x 120, 320 x 240, 640 x 480
(2) Image Quality Standard -Favor Clarity, Standard,
Favor MotionFrequency1 Image/Hour -
1—15
(2) Secondary Image Buffer 
Frequency1 Image/Hour -
1—15
2. (1) Always/Operational between
3.   (1) Image Resolution
4.   (1) Primary Image Buffer 
5....

Operating Instructions
[For assistance, please call: 1-800-272-7033] 113
No ItemsFactory Default
valueIndispensable setting Note7
1. White Balance AutoAuto, Fixed (Indoor/Fluorescent_1/
Fluorescent_2/Outdoor), Hold
Camera
Setup
2. Power Line Frequency 60 Hz 60 Hz, 50 Hz
3. Brightness Control
4. Pan/Tilt/Preset ControlEnable
Enable-
- - -
-
-5. Preset Program Control Enable - -
-
- 6. Pan Range (Minimum)
7. Tilt Range (Minimum)-60 degree -60 — +60 degree, current 
-60 — +60 degree, current 
(Home...

Operating Instructions
114
No ItemsFactory Default
valueIndispensable setting Note
-
10 Indicator Control
1. Turn on the Indicator during Power ON
Selected
1. Turn on the Indicator during Camera access
Not-selected - --
1. Turn off the Indicator always Not-selected - -
(*1): Address must be composed of four numeral characters (0 to 255) and divided with 3 dots, such as 192.168.0.253. (Cannot use 0.0.0.0 and 255.255.255.255)
(*2): Only [] is unavailable in the ASCII characters.
(*3): [Space], [], [], [#],...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 115
5.3 Specifications
Network Camera Specifications
Other SpecificationItem Description
Pan/Tilt Angle Pan: -60° to +60°, Tilt: 0° to -45°
Sensor Type 1/3 inch CMOS
Number of Pixels 320,000 pixels (Effective Pixels)
Illumination 10—10,000 lx
White Balance Auto/Manual/Hold
Adjustment Brightness, White balance
Focus Fixed 1 m (40 inches)—Infinity
Caliber Ratio (F No.) F1.8
Horizontal Angle 45°
Exposure Auto
Item Description
Video...

Operating Instructions
116
Image Transferring Condition Timer: Day of the Week/Hour/Minute/Second
Alarm: External Sensor Input
Image Transferring Method SMTP, FTP
LAN Interface 10Base-T Ethernet RJ-45 connector x 1
Wireless LAN Interface Protocol: IEEE 802.11b
Antenna: Diversity Antenna
Frequency: 2400—2483.5 MHz (11 channels)
Modulation: Direct Sequence Spread Spectrum
Media Access Protocol: CSMA/CA+ACK
External I/O*
3External Sensor Input x 1
External Device Control Output x 1
Indicator Display...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 117
5.4 Troubleshooting
About Network Camera Setup
Problem Cause and Remedy
When Setup
CD-ROM
cannot find
Network
Camera. Reconnect the AC adaptor if installation is not completed within
20 minutes.
 Do not connect Network Camera over a broadband router.
Setup program cannot detect Network Camera.
 If IP address is not assigned to the PC, setup program cannot
find Network Camera. Confirm that IP address is assigned to
the PC in the...

Operating Instructions
118
When Top Page
does not
appear. Enter the correct IP address in the web browser.
 IP address and Subnet Mask of the PC and the Network
Camera must be in the same class of the private IP address on
the LAN. Refer to page 25.
 The network congestion prevents Top Page from appearing
quickly. Wait for a while.
 A proxy server may prevent you from connecting directly to
Network Camera, set up not to use the proxy server. Refer to
page 26 for details.
 When Top Page does not...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 119
Green indicator
continues
blinking.Internal Failure of the server or the congestion on the network
traffic when using DHCP may prevent Network Camera from
getting the IP address. Ask the network administrator or your ISP.
Orange
indicator
continues
blinking.Orange indicator blinks when updating firmware on page 91. When
the Update Firmware failed, refer to page 120.
Red indicator
continues
blinking.If you cannot access Network...

Operating Instructions
120
Update
Firmware has
not finished.When Update Firmware is interrupted by power off, or for network
troubles and other problems, follow the procedure below.
*
1Refer to page 91 for the Update Firmware. About Network Camera Setup
Problem Cause and Remedy
No Top PageUpdate
Firmware
window
Yes Turn on Network Camera and the PC.
Enter the IP address on the web browser to access
Network Camera.
Top Page or Update
Firmware window?
Is the Version wished number? Access Setup Page or...