Panasonic Network Camera Kx Hcm250 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 101
Ceiling Mounting
1) Mount the Flexible Stand firmly to the ceiling or the beam using the
three screws (accessories).
 Use proper screws fit for the materials of the ceiling.
2) Attach Network Camera by screwing the threaded mount into the tripod
mounting hole.
3) Adjust the position of Network Camera and secure the Flexible Stand
firmly.
4) Roll up the cables and Flexible Stand with the tape (customer
provided).
1)
3) 4)2)
Tape...

Operating Instructions
102
4.2 Interfacing to the External I/O
The Alarm mode in the Image Transfer feature requires the external sensors/
devices to be connected to the External Sensor Input of the External I/O. Certain
features of this Network Camera can be activated by an external sensor that
senses physical changes in the area Network Camera is monitoring. These
changes can include motion detection or a physical change in the monitored area.
The external sensor can also be a door switch or an...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 103
Circuit Diagram Example
CAUTION
 THE EXTERNAL I/O IS NOT CAPABLE OF CONNECTING DIRECTLY
TO DEVICES THAT REQUIRE LARGE AMOUNTS OF CURRENT. IN
SOME CASES, A CUSTOM INTERFACE CIRCUIT (CUSTOMER
PROVIDED) MAY HAVE TO BE USED. SERIOUS DAMAGE TO
NETWORK CAMERA MAY RESULT IF A DEVICE IS CONNECTED
TO THE EXTERNAL I/O THAT EXCEEDS ITS ELECTRICAL
CAPABILITY.
 THE LOW VOLTAGE/CURRENT CIRCUITS AND HIGH VOLTAGE/
CURRENT CIRCUITS ARE IN THE...

Operating Instructions
104
4.3 ASCII and ISO-8859-1 Character Table
The characters of the ASCII character table are available for use in the various
setup windows.
IP addressing(Assignment of the IP address)
Address consists of one to four numbers (0—255). By far most common form
is four decimal numbers, (e.g., 192.168.0.253).
(0.0.0.0 and 255.255.255.255 are not available.)
Unavailable character set 1
[Space],[],[],[#],[&],[%],[=],[+],[?],[]and[:]arenotavailable.
Unavailable character set 2...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 105
Displayable character set
Network Camera can display ISO-8859-1 character set for West European
languages and the Shift-JIS character set for Japanese. Network Camera
screen may display the unreadable characters if the operating system or the
entered character set is different from the language selected on Top View
Image Setting window.
¡
¢
£
¤
¥
¦
§
¨
©
ª
«
¬
-
®
¯
±
²
³
´
µ
¶
·
¸
¹
º
»
¼
½
¾
¿
ISO-8859-1 Character Table
À
Á
Â
Ã
Ä...

Operating Instructions
106
4.4 Maintenance
To keep Network Camera functioning in good condition, maintenance plays an
important part. Keep maintenance when using Network Camera. After removing
dust from the Fixed Focus Lens, wipe the Fixed Focus Lens with lens cleaning
paper.
Fixed Focus Lens
 Do not forcedly move the lens part around the Fixed Focus Lens. Touching
it may damage the Pan/Tilt motor.
 Do not touch the Fixed Focus Lens. Touching it may leave a fingerprint and
can cause the image to be out...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 107
Section5
Specifications and Troubleshooting 

Operating Instructions
108
5.1 Network Camera Reset Procedure—Default
Settings
If the user forgets settings or passwords, Network Camera can be easily reset to
the default settings. The CLEAR SETTING button initializes all the parameters
except Date and Time setting.
With power on
,presstheCLEAR SETTING buttonfor about one second.
Indicator changes such asOrange blinking twice–>Turning off about 15
seconds. Initializing takes about one minute. Pan/Tilt motors will set to the home
position.
Notes
...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 109
5.2 Default Settings List
No ItemsFactory Default
valueIndispensable setting Note1 Network1. Network Configuration Checked - -
3. Port No. 80 - 1–65535
Static : IP Address 192.168.0.253 If necessary
If necessary
If necessary(*1)
(*1)
(*1)
(*1)Static : Subnet Mask 255.255.255.0DHCP : Host Name [Blank] (*3) 0 to 63 Characters
4. Default Gateway [Blank] Required when using Gateway
5. DNS Server1 & DNS server 2 [Blank] Required when...

Operating Instructions
110
No ItemsFactory Default
valueIndispensable setting Note
320 x 240 - 160 x 120, 320 x 240, 640 x 480
Image Quality Standard -Favor Clarity, Standard,
Favor MotionRefresh Interval
30 s-10, 15, 20, 25, 30,45 s,
1, 2, 3, 5 min
320 x 240 - 160 x 120,320 x 240
Image Quality Standard -Favor Clarity, Standard,
Favor Motion
5. Limit time of Continuous Motion JPEG
Unlimited - 10 s—Unlimited
6. Always/Operational betweenAlways - -
0h 0min — 0h 0min - -
All checked - -
Time1—4...