Panasonic Network Camera Kx Hcm250 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 31
6.Click[OK].
Refertopage41forTo p P a g e.
Refertopage32forSetup Page (Network Window)to set up wireless
network parameters.
7.Click[To p P a g e]. Top Page appears.
Notes
 When viewing images for the first time in the Internet Explorer, a pop-up
Security Warning windowmay appear. The window requests your
permission to download ActiveX
®Controls (OCX file) used to display
Motion JPEG. Refer to page 43.
 If you are configuring in[Ty...

Operating Instructions
32
2.7 Wireless Setup
To access Network window
1.Enter http://IP Address (or URL):Por t No./config.htmlonthewebbrowser
and press[Enter].Setup Pageappears. Refer to page 54 for the detail of
Setup Page.
 When port number is 80 (default), you do not need to enter port number.
2.Click[Network]on Setup Page.
To set up the wireless network parameters
SetSSID (ESSID)andEncryption (WEP)setting of the wireless router to
Network Camera in Infrastructure mode and AdHoc mode. AdHoc mode...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 33
Connection and Signal Strength status
The intensity of the data communication and radio wave are shown in the levels of
18 asterisks. Install Network Camera in the highest level after confirming the data
communication and signal strength status. At the lower levels, Network Camera
may easily lose wireless communication.
1.Set[Infrastructure](Default) or[AdHoc].
[Infrastructure]enables Network Camera to communicate with the wireless...

Operating Instructions
34
4.Set the sameEncryption (WEP)setting of the wireless router or the wireless
LAN card.
Encryption establish the security to prevent the unauthorized users to access
the wireless data communication. The same encryption is required to all the
wireless devices including wireless LAN cards and wireless router in the
wireless network. Encryption cipher can be selected[40 bit](64 bit)or[128
bit].[Password]generates encrypted cipher.[Key]enables you to set the
cipher directly on the...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 35
Authentication
[Shared Key](Default) and[Open System]are the encryption system.
[Shared Key]is generally used on the wireless network. Some wireless
routers of other manufacturers may employ[Open System]as the encryption
system.
Default Key
Default Key (40 bit only)is the pattern number to use one of four patterns of
40 bit cipher. Set the same Default Key of the wireless router.
Wireless Settings
Save the wireless setup for the...

Operating Instructions
36
9.Start up the web browser.
10.Enter http://IP address (or URL):Port No. in the address field and press
[Enter]. Top Page appears. (Default IP address is 192.168.0.253)
 When port number is 80 (default), you do not need to enter port number.
Note
When viewing images for the first time in the Internet Explorer, a pop-up
Security Warning windowmay appear. The window requests your
permission to download ActiveX Controls (OCX file) used to display Motion
JPEG. Refer to page 43.
If...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 37
2.8 Network Camera Access from the Internet
[Ty p e 2]and[Ty p e 3]of the Network Camera configuration type allow Network
Camera to be accessed from the Internet.
Port Forwarding (IP Masquerade) feature
Set up the Port Forwarding feature to the broadband router if the[Ty p e 2]—
Internet Connection with theBroadband Routeron page 18 is configured. Port
Forwarding feature translates a global IP address to a private IP address and...

Operating Instructions
38
To p P a g e
Refer to page 41 for Top Page.
Note
When viewing images for the first time in the Internet Explorer, a pop-up
Security Warning windowmay appear. The window requests your
permission to download ActiveX Controls (OCX file) used to display Motion
JPEG. Refer to page 43.
If Top Page does not appear
Confirm the network parameters and the connections of Network Camera
through page 18—page 37.
Click the language to change the display. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 39
Section3
Network Camera Screen and Setup
Window 

Operating Instructions
40
3.1 Network Camera Flow Chart
Top Page enables you to access Top View Image screen (Single Camera/Multi-
Camera screen). Authentication window can set password for the link at(A).
Enterhttp://IP Address (or URL)
:Por t No. on the web browser.
When port number is 80 (default), you do not need to enter port number.
(A) Authentication window
Authentication window can be set up for
the security. The password can keep the
security of your network. Authentication
windows are not...