Panasonic Network Camera Kx Hcm250 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 41
3.2 Top Page
To p Pa g eallows you to select the Single/Multi-Camera screen in Motion JPEG or
JPEG - Regularly Refresh. Motion JPEG enables you to view the image like a
motion video, and JPEG - Regularly Refresh can be set the refresh interval.
Enter http://IP Address (or URL)
:Port No. on the web browser.
When port number is 80 (default), you do not need to enter port number. Then Top
Page appears.
Example
 Accessing Top Page using...

Operating Instructions
42
Notes
 If a port number is specified in the IP address, http:// must precede
the IP address, otherwise the port number will not be recognized.
 When viewing images for the first time in the Internet Explorer, a pop-
upSecurity Warning windowmay appear. The window requests your
permission to download ActiveX Controls (OCX file) used to display
Motion JPEG. Refer to page 43.
Note
Network Camera is designed to work with 10/100 Mbps networks, cable
modems or xDSL Internet...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 43
ActiveXControls
When viewing images for the first time in the Internet Explorer, a pop-upSecurity
Warning windowmay appear. The window requests your permission to
download ActiveX Controls (OCX file) used to display Motion JPEG. Allow the file
to be installed. It is required and will not cause any problems with other
applications on the PC. IfSecurity Warning windowappears, click[Ye s]. When
using Windows NT, Windows 2000 or Windows...

Operating Instructions
44
3.3 Single Camera Screen
Single Camera can move the lens by thePan/Tilt operation,Preset Positioning
andClick to Center.Single Camera screen can be set eight preset positions.
[Viewer]links to the Buffered Image screen.
Notes
 The Screen Saver can prevent the PC monitor from burning in displaying
thesameimage.
 Selecting a resolution of 640 x 480 will result in a slight loss of speed when
viewing Motion JPEG. Selecting 320 x 240 offers the good compromise
between speed and...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 45
Click to Center
When you click the certain point on the Single Camera screen, the point is
centered on the image.
1.Put the cursor on the point which should be centered and click it.
2.The clicked point is centered.
Note
Click to Centerdoes not move over the end of corner when the Pan/Tilt range
reaches the end. The Pan/Tilt operation can be locked by Pan/Tilt control on
page 82.
Cursor 

Operating Instructions
46
3.3.1 Using OperationBar
Operation bar controls the general use of Network Camera. The following sections
describe the general way of using it.
(1) End Display:When Pan/Tilt operation has reached the
end of corner,Left End,Right End,Up EndorDown
Endappears.
Locked Display:Pan/Tilt/Preset, Brightness Control and
Preset program can be locked.Lockedappears when the
operation bar is clicked.
Preset Display:Preset name appears when clicking
Preset Button.
(2) Pan/Tilt Scan,Pan/Tilt...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 47
3.3.2 Using Pan/Tilt Operation
Pan/Tilt scan buttons automatically move the lens horizontally from -60° to +60°
and vertically from 0° to -45°, and the lens returns to the current position. Use Click
to Center feature to stop scanning. Each surrounding arrow of Pan/Tilt moves the
lens Up, Down, Right, Left, and the home position button moves it to Home
Position.
Note
Pan/Tilt operation can be locked on Camera Setup window on page...

Operating Instructions
48
3.3.3 Setting Preset Positioning and Home Positioning
Preset positioning and Home Positioningallow you to fix the lens on a specific
point. This feature can memorize Brightness and White Balance settings. The
preset buttons (1—4) are registered in the factory default.
(1: Upper Left,2: Upper Right,3: Lower Left,4: Lower Right)
All eight preset buttons and home position button can be overridden. Lens moves
to the preset/home position when clicking each registered button....

Operating Instructions
[For assistance, please call: 1-800-272-7033] 49
Deleting the preset buttons
1) Click[Program]. Red cancel button appears.
[Cancel]links to the Single Camera
screen without deleting.
2) Select the preset number to delete.
3) Click[Delete].
[Cancel]links to the Single Camera
screen without deleting.
4) Deleted preset button turns white.
 Go back to step 2 to delete other preset
buttons.
5) Click[Cancel]when finished.
2)
3)
1)
4)
5) 

Operating Instructions
50
3.3.4 ViewingBuffered Image Screen
Buffered Image screen can be viewed by clicking[Viewer]on the operation bar.
Buffered Image is saved in the internal memory of Network Camera by clicking
[Start Capture]. Alarm/Timer mode in the Image Transfer on page 70 can also
buffer the image. Buffered Image is erased by power off, restarting, Update
Firmware, resetting to Factory Default and when Image Transfer or Name/Time
window is saved and clicking[Start Capture].
Operation bar of the...