Panasonic Network Camera Kx Hcm110a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 81
Note
 When setting authentication, set the user name and password, and save 
them.
 When users other than an administrator are accessing the camera, 
[Setup] and [Maintenance] tab will not be displayed.
 The user name and password are case sensitive.
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
SettingDescription
General 
AuthenticationAuthentication has 2 phases.
 If you set...

Operating Instructions
82
4.Click [Go to Security: Administrator page].
 The Security: Administrator page is displayed.
Note
 When the user name and password have been changed, the camera 
displays an authentication window. Enter the user name and password, 
and click [OK].
Administrator/General Users/Guest Users
The camera has 3 user levels (administrator, general users and guest users).
Note
Guest users mean unregistered users. Set [Permit access from guest users] 
on the Security: Administrator page...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 83
2.13 Logging in to the Camera
If you set [Permit access from guest users] on the Security: Administrator page, 
[Login] tab is displayed at the top of the page. After you log in as an administrator, 
you can access the Setup page and the Maintenance page.
1.Click [Login] tab at the top of the page.
2.Check the login mode, and click [Login].
Note
The authentication window is displayed. Enter the user name and password 
set for General...

Operating Instructions
84
2.14 Creating, Modifying or Deleting General Users
The General User page allows you to create, modify or delete general users. Up to 
50 general users can be registered. The access level is set for each general user. 
If you set [Permit access from guest users] on the Security: Administrator page, the 
access level can be set for guest users.
Note
For general users, the Setup and Maintenance tabs are not displayed.
1.Click [General User] on the Setup page.
2.If you create a...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 85
3.Set each parameter.
 Settings for a general user Settings for guest users
 Clicking [Cancel] takes you back to the previous page without 
saving changes.
SettingDescription
User ID List Up to 50 general users can be registered.
 The list is used to modify or delete general user settings.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
 Password (6 to 15 characters): Enter the password.
Note
The...

Operating Instructions
86
4.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
5.Click [Go to General User page].
Access LevelAccess level is set for each general user. Check the feature to 
enable.
 In the limit time of continuous motion JPEG, set the time to 
change the video (Motion JPEG) to still images for each 
user. (Not permitted, Unlimited, 10 seconds—60 minutes) 
In the refresh interval, set the refresh interval after the 
video changes to still...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 87
2.15 Buffering or Transferring Images by Timer
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
1.Click [Trigger] on the Setup page.
2.Click No. to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], and select [Timer] for trigger, and click 
[Next>].
Note
 Click [Delete Buffered Images] to delete the buffered images.
 Click [Save] to save the settings.
 Clicking [Cancel] takes you back to...

Operating Instructions
88
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 
70).
 Clicking [].
SettingDescription
Enable Image 
Buffer/Transfer Check the box to enable the Trigger setting. Clear the box 
to disable it.
Tr i g g e r Selecting [Timer] enables the camera to buffer/transfer the 
image by timer.
 Selecting [Alarm 1 or 2] enables the camera to buffer/
transfer the image by alarm signal.
...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 89
 Clicking [].
Note
Due to the network environment, object, number of accesses, enabling IPsec, 
the camera may not record the numbers of images as you set. In this case, set 
the image buffer frequencies longer.
 Clicking [

Operating Instructions
90
7.Select the transfer method, and click [Next>].
 Clicking [