Panasonic Network Camera Kx Hcm110a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 71
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Date and Time page].
 The Date and Time page is displayed.
SettingDescription
Time Setting Select date and format (AM/PM or 24 H). These settings 
are used for each images (Single, Multi and Buffered), 
Trigger, Alarm Log and Operation Time. But E-mail subject 
and file name by E-mail or FTP transfer uses only 24 h 
for...

Operating Instructions
72
Note
Date and time settings become incorrect depending on the length of power-on 
time or the internal temperature. Using the Automatic Time Adjustment is 
recommended. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 73
2.10 Changing Camera Settings
The Camera page allows you to set the camera name, white balance, AC power 
source frequency, pan/tilt range, return to specified position and color night view 
settings.
1.Click [Camera] on the Setup page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes. 

Operating Instructions
74
SettingDescription
Camera Name The camera name is displayed on the Single Camera 
page.
 Enter ASCII characters (see page 168) or characters in 
each language (1—15 characters for a 1-byte character 
and 1—7 characters for a 2-byte character). But [Space], 
[], [], [&], [] are not available.
White BalanceSelect from the following options.
 Auto (default)—Automatic adjustment
 Fixed Indoor—Electric bulb (2800 K) 
 Fixed Fluorescent 
(White)—White (3600 K)
 Fixed Fluorescent...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 75
Pan Range*1Select from the following options.
 Minimum—Current settings, -60—+60
 Home Position*2—Current settings, -60—+60
Maximum—Current settings, -60—+60
 The values must be selected as minimumhome 
positionmaximum.
Note
If you wrongly set the range, your privacy may be seen. 
Confirm the range after the setup.
Tilt Range*1Select from the following options.
 Minimum—Current settings, -45—+20
 Home Position*2—Current...

Operating Instructions
76
3.Click [Save] when finished.
 New settings are saved. If the [Pan Range] or [Tilt Range] settings are 
changed, the camera turns to the home position.
 When finished, Success! is displayed.
4.Click [Go to Camera page].
 The Camera page is displayed.
Color Night 
View In the color night view mode, the camera image becomes 
brighter in a low illuminance. The camera image returns 
normal operation in a bright location.
 If you enable the color night view mode, refresh...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 77
Specifying Pan/Tilt Range
1.Access the camera (see page 13), and click [Single] at the top of the Top page.
2.Open another web browser, and display the Camera page (see page 73).
3.Align the Single Camera page and the Camera page side to side.
4.Set the pan/tilt range.
 Selecting [Current Settings] displays the current angle of the camera. 
Select each value while adjusting the pan/tilt on the Single Camera page.
Note
The values...

Operating Instructions
78
2.11 Adjusting Audio
The Audio page allows you to adjust the built-in microphone, the use of external 
speaker, microphone sensitivity and external speaker volume.
1.Click [Audio] on the Setup page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes. 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 79
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Audio page].
 The Audio page is displayed.
SettingDescription
Output It controls audio output for external speaker connected to 
the camera.
Vo l u m e It controls the volume to output to external speaker.
 Minimum: Turn down the volume
 Standard: Standard setting (default)
 Maximum: Turn up the volume
PC Audio Input...

Operating Instructions
80
2.12 Changing Authentication Setting and 
Administrator User Name and Password
The Security: Administrator page allows you to change authentication, 
administrator user name and password. The authentication window is displayed, 
and allows the registered users to access the camera.
Note
 If you access the camera for the first time, the window to set administrator user 
name and password is displayed. Make a note of the user name and password 
so that you will not forget them.
...