Panasonic Network Camera BL-VT164 BL-VP100 Owners Manual

Global address is obtained via the URL (domain name).
By entering the URL (including the domain name) on the web browser when accessing the camera via the
Internet, the DNS server identifies the registered global address of router (or camera).
Access using the current global address
The identified global address is used for accessing the router (or camera) to monitor images.
Note
•Refer to the contracted provider whether the current IP address is static or not.
• Depending on the provider, local...

[Access interval]
Select the interval to access the  “Viewnetcam.com” service server to check the IP address and the host name
from the following.
10min/ 20min/ 30min/ 40min/ 50min/ 1h
• Default:  1h
15.4.3  Procedure to register information for the
“Viewnetcam.com” service
1.Select [Viewnetcam.com] for [DDNS] and click the [Set] button.
→ A URL is displayed in [Your Account Link].
If a URL is not displayed in [Your Account Link], confirm the camera's network settings and Internet
connection, then...

•When “Expired” is displayed in the URL of “Viewnetcam.com” in the viewnetcam settings page or the
status page, restart the camera after registering the “Viewnetcam.com” service. After restarting the
camera, check that the registered URL is displayed in the URL of “Viewnetcam.com” of [Status] -
[Viewnetcam.com] on the “Maintenance” page.
• It is possible to check the information registered for the “Viewnetcam.com” service by accessing the
URL displayed beside  “Your Account Link ”. When the URL is not...

15.4.6  When using “Dynamic DNS Update(DHCP)”
[Host name]
Enter the host name to be used for the Dynamic DNS Update service.
• Available number of characters:  3 - 250 characters
Enter in the form of “(host name). (domain name)”.
• Available characters:  Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
• Default:  None (blank)
Note
•Refer to the network administrator for further information about the available host names.
15.5  Configure the settings...

•Available number of characters:  0 - 32 characters
• Default:  None (blank)
[Location]
Enter the name of the location where the camera is installed.
• Available number of characters:  0 - 32 characters
• Default:  None (blank)
[Contact]
Enter the E-mail address or the phone number of the SNMP manager.
• Available number of characters:  0 - 255 characters
• Default:  None (blank)
15.6  Configure the settings relating to the FTP
periodic image transmission [FTP img. trans.] Click the [FTP img. trans.] tab...

[FTP periodic image transmission]
Select  “On” or “Off”  to determine whether or not to transmit images using the FTP periodic image transmission
function.
When “On” is selected, it is necessary to configure the settings of the FTP server. ( ®page 100)
• Default:  Off
[Directory name]
Enter the directory name where the images are to be saved.
For example, enter “/img” to designate the directory “img” under the root directory of the FTP server.
• Available number of characters:  1 - 256 characters
•...

15.7  Configure the schedule settings of the FTP
periodic image transmission [FTP img. trans.] Click the [FTP img. trans.] tab on the “Network” page. ( ®page 34, page 35)
The schedule settings of the FTP periodic image transmission can be configured in this section. Refer to
page 135 for further information about the settings relating to the FTP periodic image transmission.
15.7.1  How to set the schedules
1. Check the check box of the desired day of the week of “FTP image transmission schedule”.
→ The...

3.Click the [Set] button after completing the settings.
→ The result will be displayed at the bottom of the window.
15.7.2  How to delete the set schedule
1.Uncheck the check box of the set day of the week.
138Operating Instructions
15 Configuring the network settings [Network]   

2.Click the [Set] button after completing the settings.
→ The schedule of the selected day of the week is deleted.Operating Instructions139
15 Configuring the network settings [Network]  

16   Use the camera on a wireless LAN
[Wireless] (BL-VT164W/BL-VP104W)
Wireless network settings for connecting the camera to a wireless router or other wireless device can be
configured on the “Wireless” page.
The “Wireless” page has 2 tabs; the [Basic] tab and the [Status] tab.
Complete the network settings with a wired connection using a LAN cable before performing wireless settings.
( ® page 104)
If the wireless router supports automatic settings using WPS, perform settings automatically. ( ®page...