Panasonic Network Camera BL-VT164 BL-VP100 Owners Manual

[FTP server address]
Enter the IP address or the host name of the FTP server.
• Available number of characters:  1 - 128 characters
• Available characters:  Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the
hyphen (-).
IMPORTANT
•When entering the host name for “FTP server address”, it is necessary to configure the DNS settings
on the [Network] tab of the “Network” page. ( ®page 104)
[User name]
Enter the user name (login name) to access the FTP server.
• Available...

IMPORTANT•Use an NTP server when the more accurate time & date setting is required for the system operation.
[Time adjustment]
Select the time adjustment method from the following. Time adjusted by the selected method will be used as
the standard time of the camera.
• Manual:  Time set on the “Basic” page will be used as the standard time of the camera.
• Synchronization with NTP server:  Time automatically adjusted by synchronizing with the NTP server
will be used as the standard time of the camera.
•...

The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 161, 162, 443, 995, 10669, 10670
[Time adjustment interval]
Select an interval (1 - 24 hours: in 1 hour intervals) of synchronization with the NTP server.
• Default:  1h
[Time zone]
Select a time zone corresponding to the location where the camera is in use.
• Default:  (GMT) Greenwich Mean Time: Dublin, Edinburgh, Lisbon, LondonOperating Instructions103
14 Configure the settings of the...

15   Configuring the network settings [Network]The network settings and the settings relating to DDNS (Dynamic DNS) and SNMP (Simple Network
management Protocol) can be configured on the “Network” page.
The “Network” page has 4 tabs; the [Network] tab, the [DDNS] tab, the [SNMP] tab and the [FTP img. trans.]
tab.
15.1  Configure the network settings [Network] Click the [Network] tab on the “Network” page. ( ®page 34, page 35)
The following information is required to configure the network settings....

IPv4 network[Network Settings]
Select the method of how to configure the IP address from the following.
• Static:  The IP address is configured by entering manually on “IP address(IPv4)”.
• DHCP:  The IP address is configured using the DHCP function.
• Auto(AutoIP):  The IP address is configured using the DHCP function. When the DHCP server is not found,
the IP address is automatically configured.
• Auto(Advanced):  The IP address and other network addresses are obtained using the DHCP function....

•Default:  Auto(Advanced)
Note
•When “Auto(AutoIP)”  is selected and the IP address cannot be obtained from the DHCP server, an IP
address not used in the same network will be searched within 169.254.1.0 - 169.254.254.255.
[IP address(IPv4)]
When not using the DHCP function, enter the IP address of the camera. Do not enter an IP address already
in use (for the PCs and the other network cameras).
• Default:  192.168.0.10
Note
•Multiple IP addresses are unavailable even when using the DHCP function. Refer...

Note•When connecting to the manually configured IPv6 address beyond the router, use an IPv6 compatible
router and turn on the automatic IPv6 address assignment function. In this case, it is necessary to
configure IPv6 address including prefix information provided from the IPv6 compatible router. Refer to
the manuals provided with the router for further information.
[DHCPv6]
Select “On” or “Off” to determine whether or not to use the IPv6 DHCP function.
Configure the DHCP server not to assign the same IP...

UPnPThis camera support UPnP (Universal Plug and Play). By using the UPnP function, it becomes possible to
configure the following automatically.
• Configuration of the port forwarding function of the router (However, a router supporting UPnP is required.)
This configuration is useful when accessing the camera via the Internet or from a cellular phone/mobile
terminal.
• Automatic refreshment of the shortcut to the camera that is created on the [My Network Places] folder
([Network] folder when using...

[CRT key generate]
CRT key (SSL encryption key) used for the HTTPS protocol is generated. To generate the CRT key, click the
[Execute] button to display “CRT key generate” dialog box.
[Self-signed Certificate - Generate]
The camera itself generates the security certificate used for the HTTPS protocol. (Self-signed certificate)
To generate the self-signed certificate, click the [Execute] button to display the “Self-signed Certificate -
Generate” dialog box.
[Self-signed Certificate - Information]
Displays...

Note•The camera will restart after the connection setting is changed.
• When using the self-signed certificate:
If the camera is accessed using the HTTPS protocol for the first time, the warning window will be
displayed. In this case, follow the instructions of the wizard to install the self-signed certificate.
( ® page 119)
• When using the server certificate:
In advance, install the root certificate and intermediate certificate on the browser in use. Follow the
instructions of CA for how to obtain and...