Panasonic Network Camera BL-VT164 BL-VP100 Owners Manual

12   Configure the setting relating to the image
recognition [Advanced func.]
The settings relating to the XML notification and the settings relating to the face detection can be configured
on the “Advanced func.” page.
The “Advanced func.” page has 2 tabs; the [XML notification] tab and the [Face detection] tab.
IMPORTANT
•To use the  “XML notification ” and  “Face detection ” functions, you need to install the extension software.
For further information, refer to our website...

XML notification[XML notification]
Select “On” or “Off” to determine whether or not to notify face detection information using XML.
• Default:  Off
[Notification data]
Select the type of data notification. Select one of the following.
• Face data
Detection info.(Original)/Detection info.(Advanced)
Default:  Detection info.(Original)
[Notification interval]
Select the notification interval.
• Face data
1s/2s/3s/4s/5s/6s/10s/15s/20s/30s/1min
Default:  1s
Note
•When [Notification data] is set to “Detection...

12.2  Configuration of the settings relating to the face
detection [Face detection] Click the [Face detection] tab on the “Advanced func.” page.
The settings relating to displaying the frame to be used for the face detection and the settings relating to the
face detection information attached to the image can be configured.
IMPORTANT
•The face detection function shall not guarantee the detection of faces in an image. The face detection
accuracy varies with imaging conditions.
Face detection
[Face...

13   Configure the settings relating to the
authentication [User mng.]
The settings relating to the authentication such as users and PCs restrictions for accessing the camera with a
PC or cellular phone/mobile terminal can be configured on the “User mng.” page.
The “User mng.” page has 3 tabs; the [User auth.] tab, the [Host auth.] tab and the [System] tab.
13.1  Configure the settings relating to the user
authentication [User auth.] Click the [User auth.] tab on the “User mng.” page. ( ®page 34, page...

Note•When the [Authentication] setting has been changed, close the web browser, and then access the
camera again.
[User name]
Enter a user name.
• Available number of characters:  1 - 32 characters
• Unavailable characters:  " & : ; \
• Default:  None (blank)
[Password] [Retype password]
Enter a password.
• Available number of characters:  4 - 32 characters
• Unavailable characters:  " &
• Default:  None (blank)
Note
•When the user name already in use is entered and the [Set] button is clicked,...

The restriction settings of PCs (IP address) from accessing the camera can be configured on this page.
[Host auth.]
Select “On” or “Off” to determine whether or not to authenticate the host.
• Default:  Off
[IP address]
Enter the IP address of the PC to be allowed to access the camera. Host name cannot be entered for the IP
address.
Note
•When “IP address/subnet mask”  is entered, it is possible to restrict PCs in each subnet. For example,
when “192.168.0.1/24” is entered and “2. Camera control” is...

The description below is the configuration of the priority stream that can transmit images without deteriorating
the image quality and refresh interval even when multiple users access concurrently.
Priority stream
[Activation]
Select “On” or “Off” to determine whether or not to use the priority stream.
• Default:  Off
Note
•When  “On” is selected for  “Activation” of “Priority stream ”, number of users who can access the camera
may be limited.
[Destination IP address(1)]
Enter the first destination IP...

[Image capture size]
Select the image capture size from the following.
This setting is validated only when “JPEG” is selected for “Stream type”.
When “4:3” is selected for “Aspect ratio”
   :
QVGA/ VGA/ 800x600
:
QVGA/ VGA
When “16:9” is selected for “Aspect ratio”
   :
320x180/ 640x360/ 1280x720
:
320x180/ 640x360
• Default:  640x360 
   /VGA 
98Operating Instructions
13 Configure the settings relating to the authentication [User mng.]VT164WVT164W VT164VT164 VP104WVP104W VP104VP104 VP101VP101...

14   Configure the settings of the servers
[Server]
The settings relating to the E -mail server, the FTP server and the NTP server can be configured on this page.
The “Server” page has 3 tabs; the [E-mail] tab, the [FTP] tab and the [NTP] tab.
14.1  Configure the settings relating to the E-mail
server [E-mail] Click the [E-mail] tab on the “Server” page. ( ®page 34, page 35)
The settings relating to the E-mail server used to send the alarm E-mail can be configured on this page.
IMPORTANT
•When a terminal...

IMPORTANT•When entering the host name for “SMTP server address” or “POP server address”, it is necessary to
configure the DNS settings on the [Network] tab of the “Network” page. ( ®page 104)
[Authentication]
• Type
Select the authentication method to send E-mails from the following.
– None:  It is not necessary to clear any authentication to send E-mails.
– POP before SMTP : It is necessary to first clear the POP server authentication to use the SMTP server
to send E-mails.
– SMTP:  It is necessary to...