Panasonic Network Camera BL-VT164 BL-VP100 Owners Manual

•Available characters:  0-9, A-Z and the following marks.
! " # $ % & ' ( ) * + , - . / : ; = ?
• Default:  None (blank)
[OSD] - [Position]
Select the position where the time and date and a character string to be displayed on the image of the “Live”
page.
• Upper left:  The above information will be displayed at the upper left corner of the main area on the
“Live” page.
• Lower left:  The above information will be displayed at the lower left corner of the main area on the
“Live” page.
• Upper...

Operation statusIndicator statusDuring the initializationBlinks orange ® Lights offPort forwarding error caused by the UPnP functionBlinks orange (in 2 seconds
intervals (on for 1 second / off
for 1 second))Trouble happening on the cameraBlinks redWhen there is a body heat sensor detection Lights orange (for 1 second)During privacy modeLights red
• WIRELESS  indicator (Red/Orange/Green)  : The  WIRELESS  indicator will light or
blink as follows depending on the wireless status.
Operation statusIndicator...

IMPORTANT•It is impossible to display images and to receive/transmit audio between the camera and the PC when
the viewer software “Network Camera View 4S” is not installed on the PC.
• The number of the viewer software installations can be checked on the [Upgrade] tab of the
“Maintenance” page.
[Language]
Select the language to initially display when the camera is accessed from the following.
English/Japanese/Italian/French/German/Spanish/Chinese/Russian (P/E/U model)/Portuguese (BR model)
• Default:
–...

8   Configure the Internet settings [Internet]The settings for connecting the camera to the Internet can be configured on the “Internet” page. ( ®page 34,
page 35)
The settings relating to UPnP (Auto port forwarding), DDNS (Viewnetcam.com), and network settings for the
Internet can be configured on this page.
[UPnP (Auto port forwarding)]
Select “On” or “Off” to determine whether or not to use the port forwarding function of the router.
To use the auto port forwarding function, the router in use must...

[Recommended network setting for internet]
The recommended settings for connecting to the Internet are performed here.
By clicking the [Set] button, a dialog displaying how the following settings will change is displayed.
Click the [OK] button after checking the settings to change the settings to the displayed values.
– [JPEG/H.264] tab on the “Image/Audio” page
[H.264(1)]/[H.264(2)]
[Internet mode (over HTTP)]: On
[Transmission priority]: Best effort
– [Network] tab on the “Network” page
[Common]
[Max...

9   Configure the settings relating to images and
audio [Image/Audio] (BL-VT164W/BL-VT164)/
Configure the settings relating to images
[Image] (BL-VP104W/BL-VP104/BL-VP101)
 :
The settings relating to JPEG and H.264 images such as the settings of image quality, audio, etc. can be
configured on this page.
The “Image/Audio” page has 4 tabs; the [JPEG/H.264] tab, the [Cam. Function] tab, the [Image/Position] tab
and the [Audio] tab.
  :
The settings relating to JPEG and H.264 images such as the settings of...

9.2  Configure the settings relating to JPEG images
[JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. ( ®page 34, page 35)
JPEG
Configure the settings such as “Refresh interval (JPEG)*”, “Image capture size” and “Image quality” on this
section. Refer to page 49 for further information about the settings relating to H.264 images.
"Live" page (Initial display)
Configure the settings relating to the JPEG images displayed on the “Live” page.
[Refresh interval (JPEG)*]
Select an...

:
320x180/ 640x360
• Default:  640x360 
   /VGA 
[Image quality]
Select the image quality of JPEG images displayed initially on the “Live” page.
• Default:  Quality1
[Image quality setting]
Select two types of image quality of JPEG images for each image capture size.
0 Super fine/ 1 Fine/ 2/ 3/ 4/ 5 Normal/ 6/ 7/ 8/ 9 Low
• Default:
– Quality1: 5 Normal
– Quality2: 8
The setting for “Quality1” is activated for FTP periodic image transmission, files attached to alarm E-mails.
48Operating Instructions
9...

9.3  Configure the settings relating to H.264 images
[JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. ( ®page 34, page 35)Operating Instructions49
9 Configure the settings relating to images and audio [Image/Audio] (BL-VT164W/BL-VT164)/ Configure the settings
relating to images [Image] (BL-VP104W/BL-VP104/BL-VP101) 

Configure the settings relating to H.264 image such as “Max bit rate (per client) ”,  “Image capture size ”,  “Image
quality”, etc. in this section. Refer to page 47 for the settings relating to JPEG images.50Operating Instructions
9 Configure the settings relating to images and audio [Image/Audio] (BL-VT164W/BL-VT164)/ Configure the settings
relating to images [Image] (BL-VP104W/BL-VP104/BL-VP101)