Panasonic Network Camera BL-VT164 BL-VP100 Owners Manual

FunctionsOutline of functionsA Pan/tilt *2
 
Controls the camera direction. The camera will pan or tilt to each direction
by pressing the corresponding dial key.B  Zooming control *2
 
It is possible to perform zooming operations of the camera by pressing “*”
or “#”.C  RefreshRefreshes the camera images by pressing the dial key “5”.D Resolution controlChanges the image capture size by pressing the dial key “0”.• Image in the aspect ratio of  “4:3”Changes the image capture size
between 320x240 (default)...

Note•When the HTTP port number is changed from “80”, enter “http://IP address: (colon) + port number/
mobile” *1
 in the address box of the browser. When using the DDNS function, access to “http://Host
name registered in the DDNS server: (colon) + port number/mobile”.
• When “HTTPS” is selected for “HTTPS” - “Connection” on the [Network] tab of the “Network” page,
enter as follows.
“ https://IP address: (colon) + port number /mobile” or “https://Host name registered in the DDNS server:
(colon) + port...

1.Access to “http://IP address/cam” *1
 or “http://Host name registered in the DDNS server/cam” *2
 using a
mobile terminal.
→ Images from the camera will be displayed.
Live images area
Displays images from the camera.
Operation buttons area
When functions are selected in the function selection area  D, buttons to operate those functions are
displayed.
Zoom operation area
Buttons to operate the zoom are displayed.
Function selection area
When functions that can be operated are selected, operation buttons...

2.Click the button of the function that you want to operate.
Pan/Tilt  
Preset  
Resolution control
AUX control  
Privacy Mode control  
Zoom display  
Each function is explained below.
24Operating Instructions
2 Monitor images on a cellular phone/mobile terminalCD ABE
F  VT164WVT164W VT164VT164  VT164WVT164W VT164VT164   VT164WVT164W VT164VT164  VT164WVT164W VT164VT164  VT164WVT164W VT164VT164  

Pan/Tilt  
Press the  button to display the buttons used to operate pan/tilt on the screen. The pan/tilt can be
adjusted in each direction with the 
, , , and  buttons.
Preset  
Press the  button to display the buttons used to select the preset position on the screen. Camera
images are displayed of the registered preset camera directions according to the preset numbers
selected from the buttons.
• Only position numbers 1-4 for the preset positions are displayed.
• Only registered preset positions are...

Resolution control
Press the 
 button to display the buttons used to select the resolution on the screen. The resolution
can be changed by selecting a resolution setting from the buttons.
• Image in the aspect ratio of “4:3”
   :
Changes the image capture size between 320x240, 640x480 (default), and 800x600.
:
Changes the image capture size between 320x240 and 640x480 (default).
• Image in the aspect ratio of “16:9”
   :
Changes the image capture size between 320x180, 640x360 (default), and 1280x720.
:...

AUX control  
Press the  button to display the buttons used to operate the AUX output on the screen. The AUX
output terminals can be controlled with the 
 and  buttons.
This function is only displayed when [Terminal 3] is set to [AUX output] on the settings menu.
( ® page 77)
Operating Instructions27
2 Monitor images on a cellular phone/mobile terminal  VT164WVT164W VT164VT164      

Privacy Mode control  
Press the  button to display the buttons used to operate the privacy mode on the screen. The privacy
mode can be enabled and disabled with the 
 and  buttons.
To activate privacy mode, press .
To deactivate privacy mode, press 
.
28Operating Instructions
2 Monitor images on a cellular phone/mobile terminal VT164WVT164W VT164VT164         

Zoom display  
The camera’s zoom can be operated with the , , and  buttons.
Note•You can change the image size displayed on the mobile terminal by accessing the following addresses.
– Large display: http://IP address/cam/dl
– Medium display: http://IP address/cam/dm
– Small display: http://IP address/cam/ds
• When the resolution is changed by the resolution control, the displayed resolution changes but the
image size remains the same.
• When the HTTP port number is changed from “80”, enter “http://IP...

3   Action at an alarm occurrenceThe alarm action (camera action at an alarm occurrence) will be performed when the following alarms occur.
3.1  Alarm type •Terminal alarm 
 : When connecting an alarm device such as a sensor to the EXT I/O
connectors 1-3 of the camera, the alarm action will be performed when the connected alarm device is
activated.
• Body heat sensor 
 : When a temperature difference is detected in the sensor's detection
area, the alarm action will be performed.
• VMD alarm:  When...