Panasonic Network Camera BL-VT164 BL-VP100 Owners Manual

17   Configure the settings relating to the
schedules [Schedule]
On the “Schedule” page, it is possible to configure the settings relating to schedules as follows.
• Alarm permission (Alarm input will be received only in the specified schedule.)
• VMD permission (Video motion detection will be active only in the specified schedule.)
•
 : Body heat sensor permission (The body heat sensor detection will be active during the
period of the schedule.)
• Access permission (Access to the camera will be allowed...

1.Select an action to be assigned to the schedule from “Schedule mode”.
“Off” is selected at the default.
• Off:  No action will be taken for the respective schedule.
• Alarm permission:  Alarm input (terminal alarm) will be received during the period of the schedule.
• VMD permission:  The video motion detection (VMD) function will be active during the period of the
schedule.
152Operating Instructions
17 Configure the settings relating to the schedules [Schedule]  

•Body heat sensor permission  : The body heat sensor detection will be active
during the period of the schedule.
• Access permission:  Users whose access level is set to 2 and 3 on the “User auth.” tab ( ®page 94)
can access the camera only in the period of schedule.
• 1-64 
 : The camera will move to the designated preset position at the designated
time in the schedule.
Note
•Select “On” for “User auth.” on the [User auth.] tab of “User mng.” page ( ®page 94) and “Off” for
“Host auth.” on the “Host...

18   Maintenance of the camera [Maintenance]System log check, firmware upgrade, status check and initialization of the setup menu can be performed on
this page.
The “Maintenance” page has 4 tabs; the [System log] tab, the [Upgrade] tab, [Status] tab and the [Default
reset] tab.
18.1  Check the system log [System log] Click the [System log] tab of the “Maintenance” page. ( ®page 34, page 35)
Up to 100 system logs can be saved on the built-in memory of the camera.
When the saved system logs have reached...

The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for
further information about the firmware upgrade.
[Model no.], [MAC address], [Serial no.], [Firmware version], [IPL version], [HTML version],
[IP address(IPv6)], [Viewer software installation counter]
Information of each item will be displayed.
1. Contact the dealer and download the latest firmware onto a PC.
IMPORTANT
•A blank (space) cannot be used for the name of the directory where the...

IMPORTANT•After completing the upgrade, delete temporary internet files. ( ®page 170)
• Upgrade the firmware using a PC in the same subnet as the unit.
• Follow the instructions from the dealer when upgrading the firmware.
• When upgrading the application software, use the designated file (extension: img) for the firmware
upgrade.
The name of the firmware to be used for the upgrade should be “model name (Use small letters.
“BL-” is not required.)_xxxxx.img”.
* (“xxxxx” indicates the version of the...

The status of this camera can be checked on this page.
[Viewnetcam.com]
• Server:  The URL of the “Viewnetcam.com” service server will be displayed.
• Status:  The registration status for the “Viewnetcam.com” will be displayed.
• Personal(Camera) URL:  The URL of the camera registered for “Viewnetcam.com” will be displayed.
[UPnP]
• Port number(HTTP), Port number(HTTPS):  The port number that is set for UPnP port forwarding will be
displayed.
• Status:  The port forwarding status will be displayed.
•...

The settings and the HTML data of the camera can be initialized and reboot of the camera can be performed
on this page.
[Reset to the default (Except the network settings)]
Click the [Execute ] button to reset the settings to the default. Note that the network and wireless *1
 settings will
not be reset.
It is impossible to operate the camera for about 3 minutes after the initialization.
[Load the default HTML files (setup menu).]
Click the [Execute] button to reset the HTML files to the default.
It is...

19   Privacy Mode (BL-VT164W/BL-VT164)Privacy mode allows you to protect your privacy by hiding the lens inside the camera, preventing camera
images from being seen. When privacy mode is activated:
– The POWER indicator turns red so that you can easily see that privacy mode is activated.
– The live image changes to a black display.
– JPEG images attached to “Alarm image” transfers, “FTP img. trans.” transfers, and “E-mail” transfers
change to black images.
– Body heat sensor operates normally. Body heat...

19.2  Configuring the Privacy Mode with the setup
menu 1.Click the [Privacy] button in the setup menu.
→ The lens will be hidden in the top part of the camera and the POWER indicator will light.
19.3  Turning the Privacy Mode off
You can turn privacy mode off by:
– Pressing the camera’s PRIVACY button (the POWER indicator will turn from red to green).
– Accessing the camera with a PC. When the following dialog is displayed, click  “Disable Privacy Mode ” and
enter the administrator user name and password...