Panasonic Network Camera BL-C30A Getting Started Manual

Operating Instructions
25[For assistance, please call: 1-800-272-7033]
1.5 Viewing Still Images on Your Mobile Phone
You can view still images over the Internet from a compatible mobile phone.
Enter http://IP address (or URL):Port Number/mobile
 on a mobile phone and 
press [OK]. 
 When the port number is set to 80 (default), it is not required.
 When an authentication window is displayed, enter the administrators or the 
general users user name and password.
 A still image is displayed. (Video...

Operating Instructions
26
Notes
 If the image is not displayed properly, try the following 2 URLs.
 Only an administrator can control privacy mode.
 In privacy mode, sensor and timer image buffer/transfer features also are 
stopped. 
 When executing [Privacy Mode] while setting [Allowing unregistered users] on 
the Security: Administrator page (see page 46), an authentication window is 
displayed. Log in to the camera as an administrator.
 If the users are restricted to level 1 or 2 on the General...

Operating Instructions
27[For assistance, please call: 1-800-272-7033]
2 Various Camera Features
2.1 Using Camera Features
1.Access the camera (see page 8).
Notes
 When [Allowing unregistered users] is set on the Security: Administrator 
page, click [login] tab and log in as an administrator.
 When users other than an administrator are accessing the camera, the 
[Setup] and [Maintenance] tabs are not displayed.
 The Top page is displayed.
2.Click [Setup] tab at the top of the page.
(1)(2)(3)(4)(5)(6)...

Operating Instructions
28
Basic
(1) NetworkConfigures the network settings such as connection mode 
to connect the camera to the network (see page 30).
(2) WirelessConfigures wireless network (see page 34).
(3) UPnPEnables automatic port forwarding or shortcut to the 
camera (see page 37).
(4) Viewnetcam.
comRegisters with the Viewnetcam.com service (see page 38).
(5) Date and TimeSets the date and time, automatic time adjustment and 
adjust clock for daylight saving time settings (see page 40).
(6)...

Operating Instructions
29[For assistance, please call: 1-800-272-7033] (13) Indicator 
ControlSets indicator display (see page 76).
(14) Privacy ModeEnables privacy mode (see page 77). 

Operating Instructions
30
2.2 Connecting the Camera to Your Network
The Network page offers three options to configure the camera.
 [Automatic Setup] automatically assigns an unused IP address to the camera, 
and uses UPnP to configure your router.
 [Static] allows the user to use a specific IP address.
 [DHCP] is offered for ISPs who require this option.
1.Click [Network] on the Setup page.
2.Select a connection mode.
 Each page is displayed (see page 30—page 31).
3.Enter each parameter in the...

Operating Instructions
31[For assistance, please call: 1-800-272-7033]
4.Click [Save] when finished.
 New settings are saved.
 When finished, the following page is displayed. 
Note
The current network settings are shown on the Status page in the Maintenance 
section (see page 79).
5.Click [Restart].
 The camera restarts, and the Top page is displayed.
Note
When you do not know the camera IP address while setting [Automatic Setup] 
or [DHCP Setup], you can search the camera IP address by using the...

Operating Instructions
32
Setting Description
Allow Access from 
the Internet 
(Automatic Setup 
Only) Allow Access from the Internet setting automatically 
configures the routers Port Forwarding setting (some 
routers call it Address Translation, Static IP 
Masquerade, Virtual Server or Port Mapping). To 
enable Internet access to the camera, check [Yes]. In this 
case, the camera automatically searches the unused port 
number on your network in the order from 50000 to 50050. 
To disable Internet...

Operating Instructions
33[For assistance, please call: 1-800-272-7033] Default Gateway
*1
(Static/DHCP Only) If you have the assigned Default Gateway address by your 
ISP or network administrator, enter it in this data field.
 Set 4 digits (0—255) and 3 periods such as 
192.168.0.253. But 0.0.0.0 and 255.255.255.255 are 
not available.
DNS Server 
Address
*1
(Static/DHCP Only) DNS server address is required in the following conditions.
 Transferring camera images by E-mail or FTP
 Setting cameras by...

Operating Instructions
34
2.3 Using Wireless LAN
Wireless communication is possible by adjusting the settings of the wireless LAN 
to those for the router. Take a note of the settings and save them for reference. For 
more information about wireless setting, please refer to http://panasonic.co.jp/
pcc/products/en/netwkcam/
1.Click [Wireless] on the Setup page.
2.Set each parameter for the Wireless Configuration.
Setting Description
SSID  The SSID must be set to match the SSID your router or 
wireless...