Panasonic Network Camera BL-C30A Getting Started Manual

Operating Instructions
55[For assistance, please call: 1-800-272-7033]
2.12 Configuring Multiple Cameras
The Multi-Camera Setup page allows you to configure the camera IP addresses 
and camera names to view multiple images on the Multi-Camera page (maximum 
12 cameras). These configurations are required to use the Multi-Camera page.
1.Click [Multi-Camera] on the Setup page.
2.Click [Add].
Notes
 If you click the camera number, the modification page is displayed. The 
camera setting can be modified or...

Operating Instructions
56
Notes
 If your camera will only be accessed on your local network, use each 
cameras local IP address and port number.
 If you intend to access your camera from the Internet, you must use each 
cameras global IP address and respective port number.
4.Click [Save] when finished.
 New settings are saved.
 The Multi-Camera Setup page is displayed.Setting Description
Display  Check the box to enable the camera.
IP Address
*1 or 
Host Name*2 Set the IP address or the host name...

Operating Instructions
57[For assistance, please call: 1-800-272-7033]
2.13 Buffering or Transferring Images by Timer
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
1.Click [Buffer/Transfer] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Timer] for trigger, and click 
[Next>].
 Click [Delete Buffered Images] to delete this buffered images.
 Click [Save] to save the settings. The buffered images...

Operating Instructions
58
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 40).
 Clicking [].
 Clicking [

Operating Instructions
59[For assistance, please call: 1-800-272-7033]
6.Set the image buffer frequencies, and click [Next>].
 Clicking [

Operating Instructions
60
7.Select the transfer method, and click [Next>].
 Clicking [

Operating Instructions
61[For assistance, please call: 1-800-272-7033] When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
62
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
63[For assistance, please call: 1-800-272-7033]
8.Confirm the settings, and click [Save].
 New settings are saved. The buffered images are deleted.
 When finished, Success! is displayed.
9.Click [Go to Image Buffer/Transfer page].
 The Image Buffer/Transfer page is displayed.
Notes
 If you set a short interval to transfer image to a mobile phone, many E-
mails may be sent to it leading to a large phone bill. Therefore, we 
recommend you to set a long interval. In an emergency...

Operating Instructions
64
2.14 Buffering or Transferring Images by Sensor
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
1.Click [Buffer/Transfer] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Sensor] for trigger, and click 
[Next>].
 Click [Delete Buffered Images] to delete this buffered images.
 Click [Save] to save the settings. The buffered images are deleted.
 Clicking [Cancel] takes you...