Panasonic Network Camera BL-C30A Getting Started Manual
Here you can view all the pages of manual Panasonic Network Camera BL-C30A Getting Started Manual. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
Operating Instructions
35[For assistance, please call: 1-800-272-7033]
3.Set each parameter for the Encryption.
Setting Description
Cipher Select encrypting or not encrypting.
To prevent unauthorized users from reading data, selecting
[WEP] is recommended.
WEP Selection Checked WEPKey is used as a standard WEPKey. Check
the same number as the router.
WEPKey1—4 Select one from [HEX, 10 characters 64 bit], [HEX, 26
characters 128 bit], [HEX, 32 characters 152 bit], [ASCII 5
characters 64 bit],...](http://img.usermanuals.tech/thumb/58/74587/w300_bl-c30a_en_start_om_d-70.png "Page 71
Operating Instructions
35[For assistance, please call: 1-800-272-7033]
3.Set each parameter for the Encryption.
Setting Description
Cipher Select encrypting or not encrypting.
To prevent unauthorized users from reading data, selecting
[WEP] is recommended.
WEP Selection Checked WEPKey is used as a standard WEPKey. Check
the same number as the router.
WEPKey1—4 Select one from [HEX, 10 characters 64 bit], [HEX, 26
characters 128 bit], [HEX, 32 characters 152 bit], [ASCII 5
characters 64 bit],...")
Operating Instructions 35[For assistance, please call: 1-800-272-7033] 3.Set each parameter for the Encryption. Setting Description Cipher Select encrypting or not encrypting. To prevent unauthorized users from reading data, selecting [WEP] is recommended. WEP Selection Checked WEPKey is used as a standard WEPKey. Check the same number as the router. WEPKey1—4 Select one from [HEX, 10 characters 64 bit], [HEX, 26 characters 128 bit], [HEX, 32 characters 152 bit], [ASCII 5 characters 64 bit],...
Page 72
![Page 72
Operating Instructions
36
Notes
Some wireless devices do not support the WEP 152 bit.
The camera supports only the open system authentication. If the router or
access point is set to shared key authentication, set it to auto or open
system.
4.Click [Save] when finished.
New settings are saved.
When finished, Success! is displayed.
5.Click [Go to Wireless configuration page].
The Wireless page is displayed.
6.Set the switch to WIRELESS.
Notes
It takes about 1 minute for the new settings to...](http://img.usermanuals.tech/thumb/58/74587/w300_bl-c30a_en_start_om_d-71.png "Page 72
Operating Instructions
36
Notes
Some wireless devices do not support the WEP 152 bit.
The camera supports only the open system authentication. If the router or
access point is set to shared key authentication, set it to auto or open
system.
4.Click [Save] when finished.
New settings are saved.
When finished, Success! is displayed.
5.Click [Go to Wireless configuration page].
The Wireless page is displayed.
6.Set the switch to WIRELESS.
Notes
It takes about 1 minute for the new settings to...")
Operating Instructions 36 Notes Some wireless devices do not support the WEP 152 bit. The camera supports only the open system authentication. If the router or access point is set to shared key authentication, set it to auto or open system. 4.Click [Save] when finished. New settings are saved. When finished, Success! is displayed. 5.Click [Go to Wireless configuration page]. The Wireless page is displayed. 6.Set the switch to WIRELESS. Notes It takes about 1 minute for the new settings to...
Page 73
![Page 73
Operating Instructions
37[For assistance, please call: 1-800-272-7033]
2.4 Using UPnP (Universal Plug and Play)
UPnP can automatically configure your router to be accessed from the Internet. In
order to use this feature, your router needs to support this feature and it must be
enabled. Most router manufacturers disable this feature as the default setting. See
http://panasonic.co.jp/pcc/products/en/netwkcam/ for details and see your
router manual for how to enable UPnP. After the UPnP is enabled on...](http://img.usermanuals.tech/thumb/58/74587/w300_bl-c30a_en_start_om_d-72.png "Page 73
Operating Instructions
37[For assistance, please call: 1-800-272-7033]
2.4 Using UPnP (Universal Plug and Play)
UPnP can automatically configure your router to be accessed from the Internet. In
order to use this feature, your router needs to support this feature and it must be
enabled. Most router manufacturers disable this feature as the default setting. See
http://panasonic.co.jp/pcc/products/en/netwkcam/ for details and see your
router manual for how to enable UPnP. After the UPnP is enabled on...")
Operating Instructions 37[For assistance, please call: 1-800-272-7033] 2.4 Using UPnP (Universal Plug and Play) UPnP can automatically configure your router to be accessed from the Internet. In order to use this feature, your router needs to support this feature and it must be enabled. Most router manufacturers disable this feature as the default setting. See http://panasonic.co.jp/pcc/products/en/netwkcam/ for details and see your router manual for how to enable UPnP. After the UPnP is enabled on...
Page 74
Operating Instructions 38 2.5 Registering with the Viewnetcam.com service Viewnetcam.com is a free service (dynamic DNS service) that allows you to assign an easy to remember name to the camera, similar to your favorite web site. Viewnetcam.com also allows you to easily access the camera, even when your ISP changes the IP address. Panasonic Communications recommends you to register with it for the Internet access to the camera. See http://www.viewnetcam.com for details about the Viewnetcam.com...
Page 75
![Page 75
Operating Instructions
39[For assistance, please call: 1-800-272-7033] Notes
When the Viewnetcam.com registration website is not displayed, confirm
that the URL is displayed in the right column of the Your Account Link. If
the URL is not displayed, follow the procedures below.
Personal (Camera) URL is available after you registered with the
Viewnetcam.com service.
If port forwarding is not enabled or your network is not connected to the
Internet, the Viewnetcam.com service is not available....](http://img.usermanuals.tech/thumb/58/74587/w300_bl-c30a_en_start_om_d-74.png "Page 75
Operating Instructions
39[For assistance, please call: 1-800-272-7033] Notes
When the Viewnetcam.com registration website is not displayed, confirm
that the URL is displayed in the right column of the Your Account Link. If
the URL is not displayed, follow the procedures below.
Personal (Camera) URL is available after you registered with the
Viewnetcam.com service.
If port forwarding is not enabled or your network is not connected to the
Internet, the Viewnetcam.com service is not available....")
Operating Instructions 39[For assistance, please call: 1-800-272-7033] Notes When the Viewnetcam.com registration website is not displayed, confirm that the URL is displayed in the right column of the Your Account Link. If the URL is not displayed, follow the procedures below. Personal (Camera) URL is available after you registered with the Viewnetcam.com service. If port forwarding is not enabled or your network is not connected to the Internet, the Viewnetcam.com service is not available....
Page 76
![Page 76
Operating Instructions
40
2.6 Setting Date and Time
The Date and Time page allows you to set date and time. Date and time are used
for image buffer/transfer, operation time and time stamps on the buffered image.
Note
Saving the date and time settings deletes all buffered images.
1.Click [Date and Time] on the Setup page.
2.Set each parameter.
Clicking [Cancel] cancels your settings without saving changes.](http://img.usermanuals.tech/thumb/58/74587/w300_bl-c30a_en_start_om_d-75.png "Page 76
Operating Instructions
40
2.6 Setting Date and Time
The Date and Time page allows you to set date and time. Date and time are used
for image buffer/transfer, operation time and time stamps on the buffered image.
Note
Saving the date and time settings deletes all buffered images.
1.Click [Date and Time] on the Setup page.
2.Set each parameter.
Clicking [Cancel] cancels your settings without saving changes.")
Operating Instructions 40 2.6 Setting Date and Time The Date and Time page allows you to set date and time. Date and time are used for image buffer/transfer, operation time and time stamps on the buffered image. Note Saving the date and time settings deletes all buffered images. 1.Click [Date and Time] on the Setup page. 2.Set each parameter. Clicking [Cancel] cancels your settings without saving changes.
Page 77
![Page 77
Operating Instructions
41[For assistance, please call: 1-800-272-7033]
3.Click [Save] when finished.
New settings are saved.
When finished, Success! is displayed.
4.Click [Go to Date and Time page].
The Date and Time page is displayed.
Note
Date and time settings become incorrect depending on the length of power-on
time or the internal temperature. Using the Automatic Time Adjustment is
recommended.Setting Description
Time Setting Select date and format (AM/PM or 24 H). These settings
are used...](http://img.usermanuals.tech/thumb/58/74587/w300_bl-c30a_en_start_om_d-76.png "Page 77
Operating Instructions
41[For assistance, please call: 1-800-272-7033]
3.Click [Save] when finished.
New settings are saved.
When finished, Success! is displayed.
4.Click [Go to Date and Time page].
The Date and Time page is displayed.
Note
Date and time settings become incorrect depending on the length of power-on
time or the internal temperature. Using the Automatic Time Adjustment is
recommended.Setting Description
Time Setting Select date and format (AM/PM or 24 H). These settings
are used...")
Operating Instructions 41[For assistance, please call: 1-800-272-7033] 3.Click [Save] when finished. New settings are saved. When finished, Success! is displayed. 4.Click [Go to Date and Time page]. The Date and Time page is displayed. Note Date and time settings become incorrect depending on the length of power-on time or the internal temperature. Using the Automatic Time Adjustment is recommended.Setting Description Time Setting Select date and format (AM/PM or 24 H). These settings are used...
Page 78
![Page 78
Operating Instructions
42
2.7 Changing Camera Settings
The Camera page allows you to set the camera name, white balance, AC power
source frequency and pan/tilt range.
1.Click [Camera] on the Setup page.
2.Set each parameter.
Clicking [Cancel] cancels your settings without saving changes.](http://img.usermanuals.tech/thumb/58/74587/w300_bl-c30a_en_start_om_d-77.png "Page 78
Operating Instructions
42
2.7 Changing Camera Settings
The Camera page allows you to set the camera name, white balance, AC power
source frequency and pan/tilt range.
1.Click [Camera] on the Setup page.
2.Set each parameter.
Clicking [Cancel] cancels your settings without saving changes.")
Operating Instructions 42 2.7 Changing Camera Settings The Camera page allows you to set the camera name, white balance, AC power source frequency and pan/tilt range. 1.Click [Camera] on the Setup page. 2.Set each parameter. Clicking [Cancel] cancels your settings without saving changes.
Page 79
![Page 79
Operating Instructions
43[For assistance, please call: 1-800-272-7033] Setting Description
Camera Name The camera name is displayed on the Single Camera
page.
Enter ASCII characters (see page 107) or characters in
each language (1—15 characters for a 1-byte character
and 1—7 characters for a 2-byte character). But [Space],
[], [], [&], [] are not available.
White Balance Select from the following options.
Auto (default) — Automatic adjustment
Fixed Indoor — Electric bulb (2800 K)
Fixed...](http://img.usermanuals.tech/thumb/58/74587/w300_bl-c30a_en_start_om_d-78.png "Page 79
Operating Instructions
43[For assistance, please call: 1-800-272-7033] Setting Description
Camera Name The camera name is displayed on the Single Camera
page.
Enter ASCII characters (see page 107) or characters in
each language (1—15 characters for a 1-byte character
and 1—7 characters for a 2-byte character). But [Space],
[], [], [&], [] are not available.
White Balance Select from the following options.
Auto (default) — Automatic adjustment
Fixed Indoor — Electric bulb (2800 K)
Fixed...")
Operating Instructions 43[For assistance, please call: 1-800-272-7033] Setting Description Camera Name The camera name is displayed on the Single Camera page. Enter ASCII characters (see page 107) or characters in each language (1—15 characters for a 1-byte character and 1—7 characters for a 2-byte character). But [Space], [], [], [&], [] are not available. White Balance Select from the following options. Auto (default) — Automatic adjustment Fixed Indoor — Electric bulb (2800 K) Fixed...
Page 80
![Page 80
Operating Instructions
44
3.Click [Save] when finished.
New settings are saved. If the home position is changed, the camera turns
to the home position.
When finished, Success! is displayed.
4.Click [Go to Camera page].
The Camera page is displayed. Tilt Range
*1Select from the following options.
Minimum — Current settings, -40—+10
Home Position
*2— Current settings, -40—+10
Maximum — Current settings, -40—+10
The values must be selected as minimum home
position maximum.
*1See page 45 for...](http://img.usermanuals.tech/thumb/58/74587/w300_bl-c30a_en_start_om_d-79.png "Page 80
Operating Instructions
44
3.Click [Save] when finished.
New settings are saved. If the home position is changed, the camera turns
to the home position.
When finished, Success! is displayed.
4.Click [Go to Camera page].
The Camera page is displayed. Tilt Range
*1Select from the following options.
Minimum — Current settings, -40—+10
Home Position
*2— Current settings, -40—+10
Maximum — Current settings, -40—+10
The values must be selected as minimum home
position maximum.
*1See page 45 for...")
Operating Instructions 44 3.Click [Save] when finished. New settings are saved. If the home position is changed, the camera turns to the home position. When finished, Success! is displayed. 4.Click [Go to Camera page]. The Camera page is displayed. Tilt Range *1Select from the following options. Minimum — Current settings, -40—+10 Home Position *2— Current settings, -40—+10 Maximum — Current settings, -40—+10 The values must be selected as minimum home position maximum. *1See page 45 for...