Panasonic Network Camera Bb Hcm311a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 71
2.13 Logging in to the Camera
If you set [Permit access from guest users] on the Security: Administrator page, 
[Login] is displayed at the top of the page. After you log in as an administrator, you 
can access the Setup page and the Maintenance page.
1.Click [Login] at the top of the page.
2.Check the login mode, and click [Login].
Note
The authentication window is displayed. Enter the user name and...

Operating Instructions
72
2.14 Creating, Modifying or Deleting General Users
The General User page allows you to create, modify or delete general users. Up to 
50 general users can be registered. The access level is set for each general user. 
If you set [Permit access from guest users] on the Security: Administrator page, the 
access level can be set for guest users.
1.Click [General Users] on the Setup page.
2.If you create a general user, click [Create].
3.Set each parameter.• When setting [Do not...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 73
4.Click [Save] when finished.
• New settings are saved.
• When finished, "Success!" is displayed.
5.Click [Go to General User page].Setting Description
User ID List • Up to 50 general users can be registered.
• The list is used to modify or delete general user settings.
User Name/
Password• User Name (6 to 15 characters): Enter the user name.
• Password (6 to 15 characters): Enter the...

Operating Instructions
74
2.15 Changing Initial Settings on the Single 
Camera page or the Multi-Camera page
The Image Display page allows you to change initial settings (display settings 
when a user accesses the camera) of image resolution, image quality and refresh 
interval. You can display a time stamp on the image.
1.Click [Image Display] at the top of the page.
2.Set each parameter.
• Clicking [Cancel] cancels your settings without saving changes. 

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 75
3.Click [Save] when finished.
• New settings are saved.
• When finished, "Success!" is displayed.
4.Click [Go to Image Display page].
• The Image Display page is displayed.Setting Description
Image Resolution • Select the image resolution.
640 x 480 pixels (Only for the Single Camera page)
320 x 240 pixels (default)
160 x 120 pixels (Only for the Multi-Camera page)
Image Quality • Select the...

Operating Instructions
76
2.16 Configuring Multiple Cameras
The Multi-Camera Setup page allows you to configure the camera IP addresses 
and camera names to view multiple images on the Multi-Camera page. These 
configurations are required to use the Multi-Camera page.
1.Click [Multi-Camera] on the Setup page.
2.Click [Add].
Notes
• If you click the camera number, the modification page is displayed. The 
camera setting can be modified or deleted on it.
• If you configured multiple cameras, you can change...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 77
Notes
• Set the local IP address and port number for the camera on the same 
LAN.
• If the cameras will be accessed from the Internet, be sure to use the global 
IP address. In this situation, local IP addresses such as 192.168. x.x 
cannot be used.
4.Click [Save] when finished.
• New settings are saved.
• The Multi-Camera Setup page is displayed.Setting Description
Display • Check the box to enable...

Operating Instructions
78
2.17 Format the SD memory card
Before you record the camera image, you need to format the SD memory card.
Notes
• You can confirm the SD memory capacity on the Status page (see page 
107).
1.Insert the SD memory card (see page 37 of the Installation/Troubleshooting).
2.Click [Buffer/Transfer] on the Setup page.
3.Click [Format].
4.Click [OK] on the confirmation window.
• Format is complete.
5.Click [Go to Image Buffer/Transfer page].
• The Image Buffer/Transfer page is displayed. 

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 79
2.18 Stop the SD Memory Recording
After you stop the SD memory recording, remove the SD memory card.
Notes
• You can confirm the SD memory capacity on the Status page (see page 
107).
1.Click [Buffer/Transfer] on the Setup page.
2.Click [SD video recording stop].
3.Click [OK] on the confirmation window.
• The SD memory recording is stopped.
4.Click [Go to Image Buffer/Transfer page].
• The Image...

Operating Instructions
80
2.19 Buffering or Transferring Images by Timer
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
Note
If you are recording images to the SD memory card, refresh interval slows 
down.
1.Click [Buffer/Transfer] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Timer] for trigger, and click 
[Next>].
Note
If you click [Save], all buffered images on the SD memory card are deleted.
•...