Panasonic Network Camera Bb Hcm311a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 111
3.1.4 Creating Configuration File
A configuration file can be saved on your PC. You can load the camera settings 
from the configuration file on the Load Settings page (see page 112).
Note
The saved image has privacy information. Prevent private information leaks.
1.Click [Save Settings] on the Maintenance page.
2.Click [Save].
3.Click [Save] on the File Download dialog box.
4.Specify the location,...

Operating Instructions
11 2
3.1.5 Loading Settings from a Configuration File
The settings can be loaded from a configuration file. If you reset the camera to 
factory default, the camera can load its settings from the configuration file.
Notes
• The configuration file has network settings. When the settings are loaded, 
the network settings are also loaded as they were saved. 
• If there is a firmware version difference between the camera that you 
create a configuration file from and the camera that you...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 113
3.1.6 Resetting the Camera to Factory Default
All camera settings are reset to factory default directly after the Execute button is 
clicked.
1.Click [Reset to Factory Default] on the Maintenance page.
2.Click [Execute].
• The indicator blinks orange, and then turns off for 10 seconds.
• All camera settings (user name, password, IP address, subnet mask etc.) 
are reset to factory default.
• If the...

Operating Instructions
11 4
3.2Support page
3.2.1 Seeing Help page
The Help page displays explanations for each feature about the following 1. to 6. 
items.
Clicking [Help] on the Support page displays the next page.
3.2.2 Seeing Product Information
You can see product information on the Panasonic Network Camera support 
website.
Clicking [Product Information] on the Support page displays the URL, click it.
Note
If the camera is not connected to the Internet, the website cannot be displayed. Support
(20)...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 115
3.2.3 Seeing Support Information
You can see support information on the Panasonic Network Camera support 
website.
Clicking [Support Information] on the Support page displays the URL, click it.
Note
If the camera is not connected to the Internet, the website cannot be displayed. 

Operating Instructions
11 6
3.3 External I/O
If you connect the external devices such as sensors to the External I/O and image 
buffer/transfer by alarm signal is set, the camera image is transferred by the alarm 
detection.
Explanation of the External I/O
Note
The External I/O (Input/Output) are independent. Output terminal is controlled 
only by External Output Control page on page 104. Pin Features
G • GND pin
1 External Sensor Input 1
• Use it by opening or GND short-circuit.
G • GND pin
2 External...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 117
Circuit Diagram Example
CAUTION
•The external I/O is not capable of connecting directly to devices that 
require large amounts of current. In some case, a custom interface 
circuit (customer-provided) may have to be used. Serious damage to 
the camera may result if a device is connected to the external I/O that 
exceeds its electrical capability (see page 116).
•The low voltage/current circuits and...

Operating Instructions
11 8
3.4 FACTORY DEFAULT RESET Button
The camera has a FACTORY DEFAULT RESET button on the side.
Pressing the FACTORY DEFAULT RESET button resets the camera to factory 
default. If you lose your user name and password, use this button to reset the 
camera.
• Press the FACTORY DEFAULT RESET button for 1 second when the camera 
is on.
• The indicator blinks orange, and then turns off for 5 seconds.
• Do not turn off the camera until the indicator lights green.
Notes
• The internal...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 119
3.5 Default Setting List
Basic
Items Default Required Notes
Network 
(IPv4)Connection Mode Automatic 
Setup- Automatic Setup/
Static/DHCP
Allow Access from the 
Internet (Automatic 
Setup only)No - -
Network Configuration 
from Setup Program 
(Static/DHCP only)Enable - -
Port No. 
(Static/DHCP only)80 - 20, 21, 25 and 110 
is not available.
IP address 
(Static only)192.168.0.
253When 
setting...

Operating Instructions
120
Network 
(IPv6)Connection Mode Automatic 
Setup- Automatic Setup/
Static
Allow Access from the 
Internet (Automatic 
Setup only)No - -
Port No. 
(Static only)80 - 20, 21, 25 and 110 
is not available.
IP address 
(Static only)[Blank] When 
setting Static*1
Default Gateway (Static 
only)[Blank] When using 
Gateway*1
DNS Server 1
DNS Server 2[Blank] When using 
DNS*1
Max. Bandwidth Usage 
(Mbps)Unlimited - 0.1, 0.2, 0.3, 0.5, 1 
or Unlimited
Connection Type Auto 
Negotiation--...