Panasonic Network Camera Bb Hcm311a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 91
5.Set the Lens Position When Triggered setting, and click [Next>].
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts 
after the camera turns to the alarm position.
• Clicking [].
• Clicking [

Operating Instructions
92
7.Set the image buffer frequencies, and click [Next>].
Note
Due to the network environment, object, number of accesses, enabling IPsec, 
SD memory recording, the camera may not record the numbers of images as 
you set. In this case, set the image buffer frequencies longer. For the SD 
memory recording, 1 image per second setting is recommended.
• Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 93
8.Select the transfer method, and click [Next>].
• Clicking [

Operating Instructions
94
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
• Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 95
Setting Description
Server IP 
Address or 
Host Name
*1
*1But [Space], ["], ['], [&], [] are not available.
• If you set the server IP address, set 4 digits (0—255) and 3 
periods such as "192.168.0.253". But "0.0.0.0" and 
"255.255.255.255" are not available. Or set a host name (1—
255 characters).
• You can set IPv6 address.
Port No. • Enter the number (1—65535)....

Operating Instructions
96
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
• Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 97
Setting Description
SMTP Server IP 
Address or Host 
Name• If you set the server IP address, set 4 digits (0—255) and 
3 periods such as "192.168.0.253". But "0.0.0.0" and 
"255.255.255.255" are not available. Or set a host name 
(1—255 characters).
• You can set IPv6 address.
POP3 Server IP 
Address or Host 
Name• If you set the server IP address, set 4 digits (0—255) and 
3...

Operating Instructions
98
9.After you confirm the settings and click [Next>], set E-mail notification and click 
[Next>].
• If you select [Enable], the E-mail Notification When Triggered page is 
displayed. Enter the settings seeing page 96 and page 97. When finished, 
click [Next>] and go to step 10.
10.Click [Save] after confirming the settings.
• New settings are saved.
• When finished, "Success!" is displayed.
Note
If you click [Save], all buffered images on the SD memory card are...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 99
11 .Click [Go to Image Buffer/Transfer page].
• The Image Buffer/Transfer page is displayed.
Notes
• If you set a short interval to transfer image to a mobile phone, many E-
mails may be sent to it leading to a large phone bill. Therefore, we 
recommend you to set a long interval. 1 image per second frequency is 
recommended.
• Alarm transfer stops its operations until the camera finishes all...

Operating Instructions
100
2.21 Transfer the Camera Image in Transport Mode
The camera can transfer the image in transport mode by E-mail or FTP.
Prepare the following requirements.
See page 49 and set up the E-mail or FTP server.Item Supported Feature
E-mail or FTP 
ServerOperating 
System
ISP Service: IPsec supported
: Services for multiple static global 
addresses (A global address must be set up 
to the server.)
Camera ISP Service : Services for multiple static global 
addresses (A global address...