Panasonic Network Camera Bb Hcm311a Operating Instructions

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 91
5.Set the Lens Position When Triggered setting, and click [Next>].
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts 
after the camera turns to the alarm position.
• Clicking [].
• Clicking [
						

							Operating Instructions
92
7.Set the image buffer frequencies, and click [Next>].
Note
Due to the network environment, object, number of accesses, enabling IPsec, 
SD memory recording, the camera may not record the numbers of images as 
you set. In this case, set the image buffer frequencies longer. For the SD 
memory recording, 1 image per second setting is recommended.
• Clicking [
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 93
8.Select the transfer method, and click [Next>].
• Clicking [
						

							Operating Instructions
94
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
• Clicking [
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 95
Setting Description
Server IP 
Address or 
Host Name
*1
*1But [Space], ["], ['], [&], [] are not available.
• If you set the server IP address, set 4 digits (0—255) and 3 
periods such as "192.168.0.253". But "0.0.0.0" and 
"255.255.255.255" are not available. Or set a host name (1—
255 characters).
• You can set IPv6 address.
Port No. • Enter the number (1—65535). Usually set to 21.
Login ID
*1• If your ISP requires a login ID, set it (0—63 characters).
Password
*1• If your ISP requires a password, set it (0—63 characters).
Login Timing • Select the login timing to an FTP server. If you set [One Time] 
during 1-minute transfer, the camera logs in to the server only 
once, and can reduce the time to log in or log out.
Upload File 
Name
*1• Set the file name to save on an FTP server. Enter 1—234 
characters. Entering "\" creates directories for a file. (E.g. 
NetworkCamera\image.jpg)
Overwrite 
Setting• Selecting [Overwrite File] saves and overwrites the image on 
the server. Selecting [Save as New File with Time Stamp] 
saves the image attaching time stamps on the file name, and 
the images are not overwritten.
Data 
Transfer 
Method• Select [Passive Mode] normally. If FTP does not work, select 
[Active Mode] and check the operation. 
						

							Operating Instructions
96
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
• Clicking [
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 97
Setting Description
SMTP Server IP 
Address or Host 
Name• If you set the server IP address, set 4 digits (0—255) and 
3 periods such as "192.168.0.253". But "0.0.0.0" and 
"255.255.255.255" are not available. Or set a host name 
(1—255 characters).
• You can set IPv6 address.
POP3 Server IP 
Address or Host 
Name• If you set the server IP address, set 4 digits (0—255) and 
3 periods such as "192.168.0.253". But "0.0.0.0" and 
"255.255.255.255" are not available. Or set a host name 
(1—255 characters).
• You can set IPv6 address.
Login ID
*1
*1But [Space], ["], ['], [&], [] are not available.
• If your ISP requires a login ID to log in to a POP3 server, 
set it (0—63 characters).
Password
*1• If your ISP requires a password to log in to a POP3 server, 
set it (0—63 characters).
Reply E-mail 
Address
*1• Set the sender's E-mail address. We recommend you to 
set the administrator's E-mail address.
Destination E-
mail Address
*1 
1—3• Set the destination E-mail address (up to 3).
Subject • Enter a subject with ASCII characters (see page 136) or 
characters in each language (0—44 characters for a 1-
byte character and 0—22 characters for a 2-byte 
character). But ["] is not available.
Text • Enter text with ASCII characters (see page 136) or 
characters in each language (0—63 characters for a 1-
byte character and 0—31 characters for a 2-byte 
character). But ["] and [end-of-line] key are not available. 
						

							Operating Instructions
98
9.After you confirm the settings and click [Next>], set E-mail notification and click 
[Next>].
• If you select [Enable], the E-mail Notification When Triggered page is 
displayed. Enter the settings seeing page 96 and page 97. When finished, 
click [Next>] and go to step 10.
10.Click [Save] after confirming the settings.
• New settings are saved.
• When finished, "Success!" is displayed.
Note
If you click [Save], all buffered images on the SD memory card are deleted.Setting Description
Disable • The camera does not send an E-mail notification when 
buffering or transferring image.
Enable • The camera sends an E-mail notification (up to 3 
destinations) when buffering or transferring image. 
						

							Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 99
11 .Click [Go to Image Buffer/Transfer page].
• The Image Buffer/Transfer page is displayed.
Notes
• If you set a short interval to transfer image to a mobile phone, many E-
mails may be sent to it leading to a large phone bill. Therefore, we 
recommend you to set a long interval. 1 image per second frequency is 
recommended.
• Alarm transfer stops its operations until the camera finishes all transfers. 
For example, if the camera transfers 3 images per minute and 6 images 
in total, the alarm detection will be in the following operation.
• If you are buffering images on the internal memory, the following 
operations also delete all buffered images.
• Turning off the camera.
• Saving the Date and Time page.
• Restarting, updating firmware or resetting the camera to factory 
default.
Detectable DetectableUndetectable
1st 2nd 3rd 4th 5th 6th120 seconds
An alarm signal is detected. 
						

							Operating Instructions
100
2.21 Transfer the Camera Image in Transport Mode
The camera can transfer the image in transport mode by E-mail or FTP.
Prepare the following requirements.
See page 49 and set up the E-mail or FTP server.Item Supported Feature
E-mail or FTP 
ServerOperating 
System
ISP Service: IPsec supported
: Services for multiple static global 
addresses (A global address must be set up 
to the server.)
Camera ISP Service : Services for multiple static global 
addresses (A global address must be set up 
to the camera.)
Transport Mode
Encrypted E-mail or FTP 
Server