Panasonic Network Camera Bb Hcm311a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 81
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 60).
• Clicking [].
• Clicking [

Operating Instructions
82
6.Set the image buffer frequencies, and click [Next>].
Note
Due to the network environment, object, number of accesses, enabling IPsec, 
SD memory recording, the camera may not record the numbers of images as 
you set. In this case, set the image buffer frequencies longer.
• Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 83
7.Select the transfer method, and click [Next>].
• Clicking [

Operating Instructions
84
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
• Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 85
Setting Description
Server IP 
Address or 
Host Name
*1
*1But [Space], ["], ['], [&], [] are not available.
• If you set the server IP address, set 4 digits (0—255) and 3 
periods such as "192.168.0.253". But "0.0.0.0" and 
"255.255.255.255" are not available. Or set a host name (1—
255 characters).
• You can set IPv6 address.
Port No. • Enter the number (1—65535)....

Operating Instructions
86
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
• Clicking [

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 87
Setting Description
SMTP Server IP 
Address or Host 
Name• If you set the server IP address, set 4 digits (0—255) and 
3 periods such as "192.168.0.253". But "0.0.0.0" and 
"255.255.255.255" are not available. Or set a host name 
(1—255 characters).
• You can set IPv6 address.
POP3 Server IP 
Address or Host 
Name• If you set the server IP address, set 4 digits (0—255) and 
3...

Operating Instructions
88
8.Confirm the settings, and click [Save].
• New settings are saved.
• When finished, "Success!" is displayed.
9.Click [Go to Image Buffer/Transfer page].
• The Image Buffer/Transfer page is displayed.
Notes
• If you click [Save] on the Image Buffer/Transfer page, all buffered images 
on the SD memory card are deleted.
• If you are buffering images on the internal memory, the following 
operations also delete all buffered images.
• Turning off the camera.
• Saving the...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 89
2.20 Buffering or Transferring Images by Alarm 
Signal
The Image Buffer/Transfer page allows you to enable image buffer/transfer by E-
mail or FTP.
Note
If you are recording images to the SD memory card, refresh interval slows 
down.
1.Click [Buffer/Transfer] on the Setup page.
2.Click [No.] to enable buffer/transfer.
3.Check [Enable Image Buffer/Transfer], select [Alarm 1 or 2] for trigger, select...

Operating Instructions
90
4.Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer 
buffer/transfer (see page 60).
• Clicking [