Panasonic Network Camera Bb Hcm311a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 21
Pan/Tilt Operation
Pan/Tilt Range
Note
When the pan/tilt reaches the end of lower right or lower left, a part of the 
camera body may be displayed. This is not a problem. Pan/tilt scan buttons automatically move the 
lens horizontally from -60 ° to +60 ° and 
vertically from -45 ° to +20 ° and return the 
lens to the original position. Each pan/tilt 
arrow moves the lens Up, Down, Right or 
Left, and...

Operating Instructions
22
1.2.4 Setting Home Position/Alarm Position/Preset Button
Registering Home Position/Alarm Position
A home position or 2 alarm positions can be registered. When restarted, the 
camera takes a home position. If the Lens Position When Triggered setting is set 
(see page 91), the camera takes a alarm position after the External I/O detects a 
signal. See page 116 for the External I/O.
1.Click [Program].
• [Program] switches to [Cancel]. 
Click [Cancel] to quit without saving...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 23
Registering a Preset Button
8 camera positions can be stored as presets. By default, the preset buttons (1—4) 
are registered 1: Upper Left, 2: Upper Right, 3: Lower Left and 4: Lower Right. 
These buttons can be changed (see page 25).
• Registered buttons are shown in blue.
• Unregistered buttons are shown in white.
1.Click [Program].
• [Program] switches to [Cancel]. 
Click [Cancel] to quit without...

Operating Instructions
24
Viewing the Image
1.
Click the home position, alarm 
position or registered preset button.
• The camera takes each position, 
and the image is displayed.
Alarm 
Position
Pan/Tilt
Putting the 
cursor displays 
the preset 
name.Home 
Position
UpperLeft 

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 25
Changing or Deleting the Settings
1.
Click [Program].
• [Program] switches to [Cancel]. 
Click [Cancel] to quit without saving 
changes.
2.Pan and tilt the camera to a desired 
position.
3.Click the home position, alarm position 
or a preset button (1—8).
4.Click [Save] after setting the preset 
name or click [Delete].
• If you quit to change or delete 
settings, click [Back], and then 
[Cancel].
• If...

Operating Instructions
26
1.3 Listening to Camera Audio—Talking to the 
Camera
The audio feature does not work in IPv6. Use the audio feature in IPv4 connection.
1.Access the camera (see page 11).
• The Top page is displayed.
2.Click the [Single] tab at the top of the page.
3.The audio control bar is displayed at the top of the screen. Listening or Talking 
is selected using the 2 icons. For general users, the feature must be enabled, 
otherwise it will not be displayed.
Audio Feature
Notes
• Talk button...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 27
• Audio features such as camera microphone sensitivity and mute during pan/
tilt can be set up on the Audio page (see page 66).
• If you are running other applications or opening multiple windows, the audio 
may be interrupted or delayed.
• When the image is refreshed during any operation such as preset registration 
or a web browser refresh, the volume is reset to the default (midrange) 
position....

Operating Instructions
28
1.4 Viewing Multi-Camera page
To view multiple cameras on the Multi-Camera page, you need to configure each 
camera on the Multi-Camera Setup page (see page 76).
1.Access the camera (see page 11).
• The Top page is displayed.
2.Click the [Multi] tab at the top of the page.
• Multi-Camera page can display up to 12 camera images.
3.Close the web browser.
Notes
• When selecting [All] at the View Type, all images are displayed in 160 x 
120 pixels resolution.
• 640 x 480 pixels...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 29
• When viewing video (Motion JPEG), we recommend using an Ethernet® 
switching hub instead of the repeater hub to prevent degradation in video 
display.
• Due to the network congestion or the number of accesses, the refresh 
interval may slow down.
• When the refresh interval is slow, restrict the bandwidth on the Network 
page (see page 41 and page 45). The refresh interval may be improved.
• To...

Operating Instructions
30
1.5 Viewing Buffered Image page
To buffer the images on the internal memory, you need to set up image transfer 
settings (see page 80 or page 89). You can view buffered images on this Buffered 
Image page.
1.Access the camera (see page 11).
• The Top page is displayed.
2.Click the [Buffered Image] tab at the top of the page.
3.Click the trigger number.
The trigger number is displayed (see page 80 or page 89).
The trigger is displayed 
(see page 80 or page 89).