Panasonic Network Camera Bb Hcm311a Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 11
1 Camera Monitoring
1.1 Accessing the Camera
1.Start up the web browser on your PC.
2.Enter "http://IPv4 Address (or URL):Port Number" on the address bar, and 
press [Enter] on the keyboard.
• When port number is 80 (default), you do not need to enter port number. 
See page 40 for details about port number.
• For IPv6 connection, see page 13 and page 14, and prepare the 
requirements. Enter the...

Operating Instructions
12
4.Click the following tabs to display each page.
Notes
• When users other than an administrator are accessing the camera, 
[Setup] and [Maintenance] tab will not be displayed. Additionally, When 
[Do not permit access from guest users] is set on the Security: 
Administrator page, [Login] tab will not be displayed.
• If [View Multi-Camera page] or [View Buffered Image page] is not 
permitted on the General User page, [Multi-Camera] and [Buffered Image] 
tab will not be...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 13
1.1.1 To Access the Camera in IPv6
You need to prepare the followings to access the camera in IPv6.
•PC Requirements
Operating System: Windows XP Service Pack 1
Web Browser: Internet Explorer 6.0 or later
•A IPv6 Router
•An IPv6 Connection Service
To connect in IPv6, subscribe to the ISP's "IPv4/IPv6 Dual-Stack" or "IPv6 over 
IPv4 Tunneling" service. The camera does not work in...

Operating Instructions
14
Setting up the IPv6 Router, your PC, and the Camera
Setting up the IPv6 Router
Set up the router as you subscribe to the IPv6 service. If the access from WAN side 
is disabled on the router, enable the TCP packets from WAN side in the packet 
filtering. See the Panasonic Network Camera support website at http://
panasonic.co.jp/pcc/products/en/netwkcam/ for information about the 
recommeded routers.
Setting up your PC
1.Click [Start] [All Programs] [Accessories] [Command...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 15
1.2Viewing Single Camera page
1.Access the camera (see page 11).
• The Top page is displayed.
2.Click the [Single] tab at the top of the page.
• When Security Warning window is displayed, click [Yes] (see page 16).
• When Warning - Security window is displayed, click [Always] (see page 
17).
3.Close the web browser.
Notes
• Refresh interval is [Motion] by default. You can change it on the operation...

Operating Instructions
16
Security Warning window
To view a video (Motion JPEG), ActiveX® Controls must be installed. When trying 
to display a video for the first time, Security Warning window will be displayed. 
When using Windows 2000 or Windows XP, log in as an administrator to install it.
If you cannot install ActiveX Controls or you cannot see the video in the 
Internet Explorer
• Click [Tools] [Internet Options] [Security] tab and click [Custom level] on 
the web browser. 
(1) Check...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 17
Warning - Security window
To listen to the audio, you need to download the audio applet. Click [Always] on the 
following window.
Note
See Panasonic Network Camera support website at 
http://panasonic.co.jp/pcc/products/en/netwkcam/ for the latest 
information about camera firmware and Java.
Java Authentication window
Enter user name and password, and click [Yes]. 

Operating Instructions
18
1.2.1 Auto Centering the Image (Click to Center)
Using your mouse, click any portion of the camera image. As long as it is within the 
pan/tilt range of the camera, the image will automatically move to place the 
selected point in the center of the screen.
1.Move the cursor to the desired point.
2.Click it.
• The clicked point is centered.
• See page 21 for the pan/tilt operation.
Notes
• When End Display appears on the operation bar, Click to Center does not 
work beyond the...

Operating Instructions
[For assistance, please call: 1-800-272-7033]                                 19
1.2.2 Capturing a Still Image
A still image can be saved on your PC.
1.Operate pan/tilt and select a resolution to display an image.
2.Click the capture image button.
• The camera image opens in another window.
3.Right-click the image, and select [Save Picture As...].
• Save as dialog box is displayed.
4.Specify the location, and click [Save].
• Camera image is saved at that location.
5.Click [Close]....

Operating Instructions
20
1.2.3 Using Operation Bar
Note
When the camera image is not displayed correctly, click [Refresh] at the tool 
bar on the web browser. The image will be refreshed.End Display 
and Preset 
Display:When the pan/tilt has reached the end (Left End, 
Right End, Up End and Down End), End Display 
appears. When clicking a preset button, the preset 
name appears.
Pan/Tilt 
Scan:Moves the lens throughout the horizontal ( ) or 
vertical ( ) range, and returns to the original 
position....