Panasonic Multi-Function Printer Kx Mb3010 Kx Mb3020 Operating Instructions

9. Programmable Features
61
Setting the ring pattern for fax 
(Distinctive Ring feature)
{#}{4}{3}{1}{1} “A”
{2} “B”
{3} “C”
{4} “D”
{5} “B-D” (default)
See page 53 for details.
Setting auto reduction 
feature
{#}{4}{3}{2}To receive a fax document that is longer than your recording paper.
{0} “OFF”: The unit will print received documents at their original size.
{1} “ON” (default): The unit will fit received documents onto your recording 
paper.
Changing the fax activation 
code
{#}{4}{3}{4}If you wish to...

9. Programmable Features
62
Receiving a fax into the 
computer
{#}{4}{4}{2}If you wish to receive a fax into the computer, activate this feature and run [PC 
FA X] from Multi-Function Station.
This feature is available when the fax preview mode is turned OFF (feature 
#448 on page 50).
{0} “OFF” (default): Deactivates this feature.
{1} “ALWAYS”: If the unit recognizes the connection to the computer, it will 
transfer received documents to the computer. If the unit cannot recognize the 
connection, it...

9. Programmable Features
63
9.4 Copy features
Feature/CodeSelection
Setting the paper input tray to 
use for copy
{#}{4}{6}{0}This feature will be displayed only when the lower input tray is installed (page 
74).
{1} “#1” (default): Standard input tray
{2} “#2”: Lower input tray
{3} “#1+#2”
Note:
LTo  s e l e c t  “#2”, select “PLAIN PAPER” or “THIN PAPER” for the recording 
paper type setting (feature #383 on page 57).
LTo  s e l e c t  “#1+#2”,
– select the same paper size for the standard input tray...

9. Programmable Features
64
9.5 PC print features
Feature/CodeSelection
Setting the paper input tray in 
PCL
{#}{7}{6}{0}
(KX-MB3020 only)This feature will be displayed only when the lower input tray is installed (page 
74).
{1} “#1” (default): Standard input tray
{2} “#2”: Lower input tray
{3} “#1+#2”
Note:
LTo  s e l e c t  “#2”, select “PLAIN PAPER” or “THIN PAPER” for the recording 
paper type setting (feature #383 on page 57).
LTo  s e l e c t  “#1+#2”,
– select the same paper size for the standard...

9. Programmable Features
65
Setting the font number in 
PCL
{#}{7}{6}{9}
(KX-MB3020 only)To set the font number to be used in PCL printing. The unit assigns a number 
to each font.
1.{Menu} i {#}{7}{6}{9} i {Set}
2.Enter the font number from “000” to “054”, using the dial keypad.
LThe default setting is “000”.
3.{Set} i {Menu}
Note:
LIf the font source in PCL (feature #768 on page 64) is set to “DOWNLOAD 
FONT”, the default setting is “001”.
LTo print the font list, see page 98.
Setting the font...

9. Programmable Features
66
9.6 Scan features
Feature/CodeSelection
Setting the scan mode for 
Push Scan
{#}{4}{9}{3}{1} “VIEWER” (default): The scanned image will be displayed in the [Multi-
Function Viewer] window.
{2} “FILE”: The scanned image will be saved as a file.
{3} “EMAIL”: The scanned image will be saved for email attachment.
{4} “OCR”: The scanned image will be displayed in the OCR window.
{5} “EMAIL ADDRESS”: The scanned image will be sent as an attachment 
without using email software.
{6}...

9. Programmable Features
67
Setting the information for 
scan to FTP (LAN connection 
only)
LThis feature can be 
programmed only through 
the web browser interface.When you send scanned files to an FTP server, you can register FTP 
destinations (up to 6 destinations) to the unit through the web browser interface.
1.Start Multi-Function Station.
2.[Utilities] i [Configuration Web Page] i [Device Configuration]
3.Type “root” as the user name, then enter the password (feature #155 on 
page 56). i [OK]...

9. Programmable Features
68
9.7 LAN features
Feature/CodeSelection
LAN setting with a DHCP 
server
{#}{5}{0}{0}{0} “DISABLED”: Deactivates this feature.
{1} “ENABLED” (default): The following will be allocated automatically using a 
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
Setting the IP address for the 
LAN connection
{#}{5}{0}{1}This feature is available when feature #500 is deactivated.
1.{Menu} i {#}{5}{0}{1} i {Set}
2.Enter the IP address of the...

9. Programmable Features
69
Approving users for the LAN 
connection
{#}{5}{3}{2}{0} “DISABLED” (default): Deactivates this feature.
{1} “ENABLED”: The unit will deny/approve access from the pre-programmed 
IP patterns. You can program whether to deny or approve IP addresses. Up to 
4 patterns each for IPv4 and IPv6 can be programmed through the web browser 
interface.
1.Start Multi-Function Station.
2.[Utilities] i [Configuration Web Page] i [Network Configuration]
3.Type “root” as the user name, then...

9. Programmable Features
70
9.8 Network features (LAN connection only)
These features can be programmed through the web browser interface.
FeatureTa bSelection
Setting the LAN 
features[LAN FEATURE]Enter the LAN feature settings. See page 68 for details.
Setting the community 
name for SNMP[SNMP]Enter the SNMP community name. Consult your 
service provider or network administrator for details.
Setting the location 
where you use this unit[SNMP]Enter the location information of the unit.
Displaying the...