Panasonic Multi Format Digital Hd Video Cassette Recorder Ajhd3700b 1 Operating Instructions

							– 41–
VIDEO OUT SET UP STATE menu
∑Selecting the TAPE/EE output signals
The video, audio and cue signals which are output during the VTR’s operation are switched on
this menu to TAPE or EE signals.
(1) Press the center cursor key to display the cursor.
(2) Move the cursor to the desired position using the cursor keys.
°The cursor will not move to places which cannot be set.
(3) Press the center cursor key to select TAPE or EE.
Refer to the following table for the types of setting options.Center cursor key
Cursor key
≥When a setting is to be established during head selection using the TEST menu or during edit-
ing, the setting applying to the operation concerned takes precedence over the setting select-
ed using the VIDEO OUT SET UP STATE menu.
≥When TAPE/EE has been set by F1 (OUTPUT) on the HOME menu, the HOME menu setting
takes precedence.
(Underline denotes the factory setting mode.)
Mode
CH
VIDEO
D.AUDIO
CUE
EJECT
FREEZE
BLACK
GRAY
FREE
NOISE
EE1
EE2
MUTE
EE1
EE2
TAPE
EE
STBY
OFF
FREEZE
BLACK
GRAY
FREE
NOISE
EE1
EE2
MUTE
EE1
EE2
TAPE
EE
TENSION
RELEASE
FREEZE
BLACK
GRAY
FREE
NOISE
EE1
EE2
MUTE
EE1
EE2
TAPE
EE
STBY
ON
TAPE
EE1
EE2
MUTE
EE1
EE2
TAPE
EE
REC
TAPE
EE1
EE2
TAPE
EE1
EE2
EE
EDIT
REC
TAPE
EE1
TAPE
EE1
EE
JOG/
VAR
TAPE
TAPE
MUTE
TAPE
SHTL
TAPE
TAPE
MUTE
TAPE 
						

							– 42–
VIDEO OUT CONVERT menu
This menu is displayed by pressing the following keys: )F10VIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
Key
F1
F2
F3
F4–F6
F7
F8
F9
F10–F13
Key designation
HD_TO_SD
SD_TO_HD
HD_TO_HD
——
HD
——
SD
——
Description
Transfers the VTR to the VIDEO OUT CONVERT HD TO SD
menu screen.
Transfers the VTR to the VIDEO OUT CONVERT SD TO HD
menu screen.
Transfers the VTR to the VIDEO OUT CONVERT HD TO HD
menu screen.
Returns the VTR to the VIDEO OUT HD menu screen.
Returns the VTR to the VIDEO OUT SD menu screen. 
						

							– 43–
VIDEO OUT CONVERT HD_TO_SD menu
This menu is displayed by pressing the following keys: ))F1F10VIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
FLDFIT_
H
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9–F13
Key designation
MODE
RESPONSE
ENHANCE
——
V_FILTER
V_EXTEND
——
EXIT
——
Description
Selects the aspect ratio at which signals are output from the down-converter.
FIT_V:Changes the magnification by matching the input size
to the output size along the vertical axis. (The aspect
ratio remains the same.)
FIT_H:Changes the magnification by matching the input size
to the output size along the horizontal axis. (The
aspect ratio remains the same.)
FIT_HV:Changes the magnification by matching the input size
to the output size along the horizontal and vertical
axes. (The aspect ratio may be distorted.)
14:9:Sets the aspect ratio to 14k9.
13:9:Sets the aspect ratio to 13k9.
°When the 525p (480/59.94p) has been selected for the SD SDI
MAIN output, the aspect ratio remains fixed at 16:9.
Selects the frequency bandwidth of the down-converter output signals.
STANDARD/WIDE/NARROW
Controls the enhancement adjustment of the down-converter output signals.
0dB/1.5dB/3dB/6dB
This item appears only when the 1080p (psf) has been selected
as the system format.
This is the extension function for vertical frequency characteristic
in down converter output signals.
FLD
:Filter field processing
FRM:Filter frame processing
FRM2:This item appears only when the 1080/23p (psf) has
been selected as the system format. F10 to F13 key
menus are displayed when FRM2 has been selected,
and then the horizontal and vertical characteristics can
be controlled independently. (See page 44.)
This item appears only when the 1080/59i has been selected as
the system format. (See page 45.)
Selects ON or OFF
.
F10 to F13 key menus are displayed when ON has been
selected, and then the horizontal and vertical characteristics can
be controlled independently.
Returns the VTR to the VIDEO OUT CONVERT menu screen. 
						

							– 44–
VIDEO OUT CONVERT HD_TO_SD menu
The following menu is displayed when FMR2 has been selected with the F5 (V_FILTER) key in the system for-
mat 1080/23p (psf). (The characteristic of H and V can be controlled independently.)
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
FRM2
H_FILTER
V_FILTERRESPONSE
ENHANCE
0dB STANDARD
RESPONSE
STANDARD
ENHANCE
0dB
FIT_
H
Key
F10
F11
F12
F13
Key designation
H_FILTER ENHANCE
H_FILTER RESPONSE
V_FILTER ENHANCE
V_FILTER RESPONSE
Description
Sets the picture quality (horizontal frequency characteristic).
0/0.75/1.0/1.25/1.5/2.0/3.0
Sets the picture quality (horizontal frequency bandwidth).
STANDARD/WIDE/NARROW
Sets the picture quality (vertical frequency characteristic).
0/0.75/1.0/1.25/1.5/2.0/3.0
Sets the picture quality (vertical frequency bandwidth).
STANDARD/WIDE/NARROW
ONoteN
When F and F10 or F and F12 are pressed at the same time in the F10 (H_FILTER ENHANCE) or F12 (V_FILTER
ENHANCE) setting, the setting value is highlighted and can be changed using the ADJUST VR control.
When either F and F10 or F and F12 are pressed together once again, the highlighting disappears, making it no longer
possible to perform settings with the ADJUST VR control.
This returns the ADJUST VR control to toggle mode with the function key. 
						

							– 45–
Key
F10
F11
F12
F13
Key designation
H_FILTER ENHANCE
H_FILTER RESPONSE
V_FILTER ENHANCE
V_FILTER RESPONSE
Description
Sets the picture quality (horizontal frequency characteristic).
0/1.0/2.0/3.0/4.0/5.0/6.0
Sets the the picture quality (horizontal frequency bandwidth).
STANDARD/WIDE/NARROW
Sets the the picture quality (vertical frequency characteristic).
0/0.5/1.0/1.5/2.0/3.0/4.0
Sets the the picture quality (vertical frequency bandwidth).
STANDARD/WIDE/NARROW
VIDEO OUT CONVERT HD_TO_SD menu
The following menu is displayed when ON has been selected with the F6 (V_EXTEND) key in the system for-
mat 1080/59i. (The characteristic of H and V can be controlled independently.)
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
V_EXTEND
H_FILTER
V_FILTERRESPONSE
ENHANCE
0dB STANDARD
RESPONSE
STANDARD
ENHANCE
0dB
FIT_
HON
ONoteN
When F and F10 or F and F12 are pressed at the same time in the F10 (H_FILTER ENHANCE) or F12 (V_FILTER
ENHANCE) setting, the setting value is highlighted and can be changed using the ADJUST VR control.
When either F and F10 or F and F12 are pressed together once again, the highlighting disappears, making it no longer
possible to perform settings with the ADJUST VR control.
This returns the ADJUST VR control to toggle mode with the function key. 
						

							– 46 – – 46 –
VIDEO OUT CONVERT SD_TO_HD menu
This menu is displayed by pressing the following keys: ))F2F10VIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
Key
F1
F2
F3
F4–F7
F8
F9–F13
Key designation
MODE
RESPONSE
ENHANCE
——
EXIT
——
Description
Selects the aspect ratio at which signals are output from the up-
converter.
FIT_V:Changes the magnification by matching the input size
to the output size along the vertical axis.  (The aspect
ratio remains the same.)
FIT_H:Changes the magnification by matching the input size
to the output size along the horizontal axis.  (The
aspect ratio remains the same.)
FIT_HV:Changes the magnification by matching the input size
to the output size along the horizontal and vertical
axes. (The aspect ratio may be distorted.)
Selects the frequency bandwidth of the up-converter output
signals.
STANDARD/WIDE/NARROW
Controls the enhancement adjustment of the up-converter output
signals.
0dB/1.5dB/3dB/6dB
Returns the VTR to the VIDEO OUT CONVERT menu screen. 
						

							– 47– – 47–
VIDEO OUT CONVERT HD_TO_HD menu
This menu is displayed by pressing the following keys:  ))
°This menu is operational when 1080/23.98p, 1080/24p or 1080/25p has been set as the system format.F3
F10VIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
Key
F1
F2
F3
F4–F7
F8
F9–F13
Key designation
——
RESPONSE
ENHANCE
——
EXIT
——
Description
——
Selects the frequency bandwidth of the converter output signals.
STANDARD/WIDE/NARROW
Controls the enhancement adjustment of the converter output
signals.
0dB/1.5dB/3dB/6dB
Returns the VTR to the VIDEO OUT CONVERT menu screen. 
						

							– 48–
AUDIO IN menu
This menu is displayed by pressing the following key:AUDIO IN
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
The digital audio input statuses are displayed here.
PRE EMPHASIS ON:Pre-emphasis is applied to the input signals.
OFF:Regular signals with no pre-emphasis are
supplied. 
						

							– 49–
AUDIO IN menu
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
Key designation
CH-1
For adjusting the audio
CH1 input level.
CH-2
For adjusting the audio
CH2 input level.
CH-3
For adjusting the audio
CH3 input level.
CH-4
For adjusting the audio
CH4 input level.
CUE
For adjusting the cue
audio input level.
PCM
CUE
SET UP
CH-MIX
CH-5
For adjusting the audio
CH5 input level.
CH-6
For adjusting the audio
CH6 input level.
CH-7
For adjusting the audio
CH7 input level.
CH-8
For adjusting the audio
CH8 input level.
Description
UNITY
:Input level is fixed at UNITY value. 
VAR:Input level can be varied with ADJUST control.
≥For switchover, press the UNITY/VAR button.
Transfers the VTR to AUDIO IN PCM INPUT SELECT menu
screen.
Transfers the VTR to the AUDIO IN CUE INPUT menu screen.
Transfers the VTR to the AUDIO IN SET UP menu screen.
Transfers the VTR to the AUDIO IN CH-MIX SELECT menu
screen.
UNITY
:Input level is fixed at UNITY value. 
VAR:Input level can be varied with ADJUST control.
≥For switchover, press the UNITY/VAR button. 
						

							– 50–
AUDIO IN PCM INPUT SELECT menu
This menu is displayed by pressing the following keys:>F6AUDIO IN
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1