Panasonic Multi Format Digital Hd Video Cassette Recorder Ajhd3700b 1 Operating Instructions

							– 131–
PANEL SET UP (OP MAP REMOTE) menu
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9–F12
F13
Key designation
VIDEO
For adjusting the video
level.
AUDIO
For adjusting the audio
level.
TRACKING
For selecting the tracking
adjustment.
MON SEL
For selecting the monitor.
MAP MODE
For enabling key
operations.
FUNCTION
For enabling or disabling
all the functions.
EJECT
For enabling or disabling
the operation of the
EJECT button during
remote control operations.
EXIT
——
LOCAL
Description
Selects the VIDEO OUT menu level adjustment function. When
the key is pressed, the display is highlighted.
Selects the AUDIO REC and PB level adjustment function.
When the key is pressed, the display is highlighted.
Selects the tracking adjustment. When the key is pressed, the
display is highlighted.
Selects the L/R selector button for monitoring the audio signals.
When the key is pressed, the display is highlighted.
ALL
:All the keys can be operated by remote control.
SELECT:The selected keys can be operated by remote control.
ENABLE:All the functions are enabled.
DISABLE:All the functions are disabled.
ENABLE:Eject operations are enabled.
DISABLE:Eject operations are disabled.
Returns the VTR to the SET UP menu screen.
Transfers the VTR to the OP MAP LOCAL menu screen. 
						

							– 132–
PANEL SET UP (OP MAP REMOTE) menu
∑Correlation between F5 (MAP MODE) and F6 (FUNCTION) keys
ONotesN
≥Even when the F6 key has been set to ENABLE on this menu, its setting will be changed to
DISABLE if the unit is in the remote control mode and it receives the LOCAL DISABLE com-
mand. 
≥(The EJECT button acts in accordance with the F7 (EJECT) key setting.)
≥At the time of shipment, the F6 key was set to ENABLE and the F5 key to SELECT.
∑OP MAP setting method
≥Those buttons and keys which are marked on the graphics of the control panel shown on the
display correspond to the buttons on the actual control panel.
≥The part corresponding to a key or button which has been pressed on the control button is
highlighted.
≥When the JOG, VAR or SHTL button is pressed, the search dial appears.
≥When the F1 (VIDEO) key is pressed, the ADJUST control appears.
≥When the F2 (AUDIO) key is pressed, the ADJUST control appears.
≥When the F3 (TRACKING) key is pressed, the ADJUST control appears.
≥When the F4 (MON SEL) key is pressed, the L/R button appears.
F5(MAP MODE)
ALL
SELECT
F6(FUNCTION)
ENABLE
DISABLE
ENABLE
DISABLE
Operation keys (STOP,
PLAY, etc.)
Regardless of this menu’s
settings, all settings are
enabled.
Regardless of this menu’s
settings, all settings are
disabled.
Only keys selected on this
menu enabled.
Regardless of this menu’s
settings, all settings are
disabled.Function keys 
(F1 to F13, controls, etc.)
Regardless of this menu’s
settings, all settings are
enabled.
Regardless of this menu’s
settings, all settings are
disabled.
Only functions selected by
F1 to F4 on this menu and
other specific functions
enabled.
As above.
Description of setting 
						

							– 133–
PANEL SET UP (OP MAP LOCAL) menu
Press the ###keys to display the OP MAP LOCAL menu.
This menu is used to set and display the buttons, keys, controls, etc. which cannot be operated on the unit’s
front panel in the local mode.
The menu serves to prevent settings or adjustment values from being changed when the corresponding but-
ton, key or control is touched by mistake.
≥With the initial setting, all operations are enabled.F13F11F11SET UP
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 
						

							– 134–
∑OP MAP setting method
≥Those buttons and keys which are marked on the graphics of the control panel shown on the
display correspond to the buttons on the actual control panel.
≥The part corresponding to a key or button which has been pressed on the control button is
highlighted.
≥When the JOG, VAR or SHTL button is pressed, the search dial appears.
≥When the F1 (VIDEO) key is pressed, the ADJUST control appears.
≥When the F2 (AUDIO) key is pressed, the ADJUST control appears.
≥When the F3 (TRACKING) key is pressed, the ADJUST control appears.
≥At the time of shipment, the F5 (MAP MODE) key was set to ALL so that all the keys, buttons,
etc. are operational.
PANEL SET UP (OP MAP LOCAL) menu
Key
F1
F2
F3
F4
F5
F6–F7
F8
F9–F12
F13
Key designation
VIDEO
For adjusting the video
level.
AUDIO
For adjusting the audio
level.
TRACKING
For selecting the tracking
adjustment.
MON SEL
For selecting the monitor.
MAP MODE
For enabling key
operations.
——
EXIT
——
REMOTE
Description
Selects the VIDEO OUT menu level adjustment function. When
the key is pressed, the display is highlighted.
Selects the AUDIO REC and PB level adjustment function. When
the key is pressed, the display is highlighted.
Selects the tracking adjustment. When the key is pressed, the
display is highlighted.
Selects the L/R selector button for monitoring the audio signals.
When the key is pressed, the display is highlighted.
ALL
:Regardless of the OP MAP settings, operation of all
the functions is enabled.
SELECT:Operation of the only the functions to be selected in
the OP MAP mode is enabled.
Returns the VTR to the SET UP menu screen.
Transfers the VTR to the OP MAP REMOTE menu screen. 
						

							– 135–
°The items set using F1 to F7 on the SYSTEM SET UP menu (on pages
141 and 143) are not rewritten even if the factory files are loaded.
USER SET UP menu
This menu is displayed by pressing the following keys:#
F12SET UP
Key
F1
F2
F3
F4
F5
F6–F7
F8
F9
F10
F11–F13
Keydesignation
LOAD
For loading
user files.
SAVE
For saving
user files.
DELETE
For deletinguser files.
——
POWER
UP
Sets the file
to be loaded
when the
power is
turned on.
——
EXIT
LOCK
For locking
files.
PASSWORDPassword.
——
Description
Press together with F key.
This calls the selected user files.
Press together with F key.
This saves the selected user files.
Press together with F key.
This deletes the selected user files.
LAST:Call last file
FACTRY:Call factory file°
1 to 10:Calls user file.
Returns the VTR to the SET UP menuscreen.
Press together with F key.
File selected with cursor locks and
cannot be renewed or deleted. Press
again to release the lock. Use with user
files 5 to 10.
Used to set or release the lock mode for
files 1 to 4 with a password. After this
key is pressed, the 4-character
password is input.
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
F+F3
Syscon (User File)
On Board RAM
On Board RAM
VTR
Delete
F+F1
F+F2 Current File
No. 1~10Load
Save
OSET UP: USER menu function settingsN≥User files (SET UP menu) 
						

							– 136 –
USER SET UP menu
∑Saving user files
Twelve files are provided in this unit.
Two of these files are reserved: the LAST file containing the statuses established when the power was last
turned off, and the FACTORY file containing the factory statuses (initial settings). These two files cannot be
deleted or updated.
The other 10 files are available as user files for storing the menu settings selected by the user.
They can be called, deleted or updated as desired.
(1) Set to the state in which the menu settings are to be saved.
≥When UNITY and VAR settings are provided, the VAR values will also be saved even if the
UNITY setting has been selected.
(2) Press the cursor keys to select the number of the desired file.
The cursor appears at the place which was designated last.
(3) Input the filename.
Up to 20 characters can be input.
1. EDITOR 1
(4) Press the F key and F2 (SAVE) key together to save the file.
Inputting the filename
≥0 to 9: Press the number keys.
≥To enter a letter of the alphabet, proceed as follows.
≥1) Press the center cursor key.
≥2)  Use the ADJUST control to move the column cursor to the
left or right, and select the desired character.
≥2) When the F key and cursor key are pressed together, the
cursor can be moved up or down or to the left or right.
≥3)  When the ENT key is pressed, the character above the cur-
sor is input.
≥4)  Press the center cursor key to complete the character input.
≥5)  Press the F key and F2 (SAVE) key together to save the file.
≥To correct a character, press the BS key.
≥To redo the entire input, press the C key.
A password is required to access files 1 to 4.
(1)  Press the F10 (PASSWORD) key.
(2)  Input a password consisting of 4 characters.
≥For details on the password, consult your servicing engineer.
1FACTORY
2
3
4
ABCDEFGHIJ
KLMNOPQRST
UVWXYZ 012
3456789
?; , ()._rs 
						

							– 137–
USER SET UP menu
∑Locking user files
When locked, the files are protected from subsequent attempts to delete or update their data.
(1) Press the cursor keys to select the file to be locked.
1. EDITOR 1
(2) Input the password for files 1 to 4.
For files 5 to 10, press the F key and F9 key together.
When a file is locked, its display is shown in reverse video.
1. EDITOR 1
≥When files are to be unlocked:
When the password is input for files 1 to 4, the files are unlocked.
1. Press the cursor keys and select the file to be unlocked.
2. Press the F10 (PASSWORD) key.
3. Input the 4-character password.
3. If the input password is correct, the file is unlocked.
3. If it is incorrect, the file will not be unlocked.
When the F key and F9 key are pressed together again, files 5 to
10 are unlocked.
1. EDITOR 1
∑Updating user files
(1) Press the cursor keys to select the file to be updated.
≥If the file is locked, unlock it.
1. EDITOR 1
Unlocked 
(the file must be unlocked 
if the display is in reverse video)
(2) Change the contents of the file.
For instance, press the F4 (TC/CTL) key on the HOME menu and change TC to CTL1.
(3) Press the F key and F2 (SAVE) key together. Then press the F4 (TC/CTL) key on the HOME
menu and change to TC again.
The changed setting is now saved in the file.
When the F key and F1 (LOAD) key are pressed together and the HOME button is pressed
to display the HOME menu, the setting of the F4 (TC/CTL) key which was changed above
will have been changed to CTL1.
≥The pre-updated setting is cleared.
¢ 
						

							– 138–
USER SET UP menu
∑Deleting user files
Unnecessary files can be deleted.
(1) Press the cursor keys to select the file to be deleted.
5. EDITOR 2
(File locked)
(2) Check that the file to be deleted is unlocked.
If it is locked, refer to the section on locking the user files, and unlock the file.
5. EDITOR 2
(Lock released)
(3) Press the F key and F3 (DELETE) key together.
The file is now deleted.
≥A locked file cannot be deleted unless it is first unlocked.
∑Calling user files
Files saved in the memory can be called.
(1) Press the cursor keys to select the file to be called.
1. EDITOR 1
(2) When the F key and F1 (LOAD) key are pressed together, the file is called.
Check the called file.
∑Automatically calling a file when the power is switched on
When the power is switched on, a file can be called automatically.
(1) Press the F5 (POWER UP) key.
Each time this key is pressed, a file is called.
The selected file is called automatically the next time the power is turned on.
≥The LAST file serves as the initial setting.
¢ 
						

							– 139–
USER SET UP menu
∑Copying user filenames
When a file is to be given the same name, the filename is copied.
(1) Press the cursor keys to select the filename to be copied.
1. EDITOR 1
(2) Press the FROM key.
1. EDITOR 1
(3) Press the cursor keys to select the number of file serving as the copy destination.
5.
(4) Press the COPY key.  The filename is copied.
5. EDITOR 1
(5) Press the F and F2 (SAVE) key together.
≥This function copies the filename only.
≥Bear in mind that the contents of the file cannot be copied. 
						

							– 140–
SYSTEM SET UP menu
This menu is displayed by pressing the following keys:)
The system format and video output format currently set in the menu are displayed.F4SET UP
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1