Panasonic Multi Format Digital Hd Video Cassette Recorder Ajhd3700b 1 Operating Instructions

							– 21–
HOME SET UP menu
∑Programmed play function
(1) Press the F4 (PRG PLY) key.
(2) Set the step to FINE or COARSE using the F3 (PRG PLY) key.
(3) Set the programmed play speed using the ADJUST control.
(4) Press the PLAY and VAR buttons together.
(5) To change the playback speed, turn the ADJUST control while pressing the VAR button.
(6) To stop programmed play, press the STOP button.
2.0% PRG PLY 
						

							– 22–
VIDEO IN menu
This menu is displayed by pressing the following key:VIDEO IN
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 
						

							– 23–
VIDEO IN menu
Key
F1
F2
F3–F6
F7
F8–F11
F12
F13
Key designation
INPUT
For selecting the HD video
input signals.
INT SG
For selecting the type of
HD internal signals.
——
SG REF
For synchronizing the
INT SG
——
INT SG 
For selecting the type of
SD internal signals.
INPUT
For selecting the SD video
input signals.
Description
DIGITAL
:Selects the serial input signals.
INT SG:Selects the internal signals.
75% CB:Selects the 75% color bar signal. 
100% CB
:Selects the 100% color bar signal. 
RAMP:Selects the RAMP signal.
MULT-BST:Selects the multi-burst signal.
BLACK:Selects the black-burst signal.
SIF PLL:Selects the signals for checking the serial interface
PLL.
SIF EQ:Selects the signal for checking the serial interface
equalizer. 
SMPTE CB:Selects the SMPTE color bar signal.
ARIB CB:Selects the ARIB color bar signal.
AUTO:When video input signals are present, the internal 
reference signal is locked to the input signals; when 
video input signals are not present, it is locked to the 
signal selected by the OUT REF setting°.
OUTPUT:The internal reference signal is locked to the 
signal selected by the OUT REF setting°.
ONoteN
Bear in mind that the embedded audio signal in the SD SDI input
will be muted when OUTPUT is selected for this setting.
75% CB:Selects the 75% color bar signal. 
100% CB
:Selects the 100% color bar signal. 
RAMP:Selects the RAMP signal.
MULT-BST:Selects the multi-burst signal.
BLACK:Selects the black-burst signal.
SIF PLL:Selects the signals for checking the serial interface
PLL.
SIF EQ:Selects the signal for checking the serial interface
equalizer. 
SMPTE CB:Selects the SMPTE color bar signal. 
DIGITAL
:Selects the serial input signals.
INT SG:Selects the internal signals.
°Refer to the HOME SET UP menu. 
						

							– 24–
VIDEO OUT HD menu
This menu is displayed by pressing the following key:VIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 
						

							– 25–
VIDEO OUT HD menu
Key
F1
F2
F3
F4
F5–F7
F8
F9
F10
F11–F13
Key designation
For adjusting the Y level.
PB
For adjusting the P
Blevel.
PR
For adjusting the P
Rlevel.
BLACK.L
For adjusting the black
level. 
——
SET UP
SD
CONVERT
——
Description
j¶to i3 dB (j3 dB to i3 dB in fine adjustment mode)
≥Establishes the fine adjustment mode if the key is pressed
together with the F key.
j¶to i3 dB (j3 dB to i3 dB in fine adjustment mode)
≥Establishes the fine adjustment mode if the key is pressed
together with the F key.
j¶to i3 dB (j3 dB to i3 dB in fine adjustment mode)
≥Establishes the fine adjustment mode if the key is pressed
together with the F key.
n100 mV
Transfers the VTR to the VIDEO OUT HD SET UP menu screen.
Transfers the VTR to the VIDEO OUT SD menu screen.
Transfers the VTR to the VIDEO OUT CONVERT menu screen. 
						

							– 26 –
VIDEO OUT HD SET UP menu
This menu is displayed by pressing the following keys:>F8VIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 
						

							– 27–
VIDEO OUT HD SET UP menu
Key
F1
F2–5
F6
F7
F8
F9–F11
F12
F13
Key designation
LINE CONV°
——
SERIAL SYS PHASE
INTERP.
Interpolation
EXIT
——
STATE
——
Description 
Line conversion function
OFF
:No line conversion; when a 1035 tape is played back,
1080 signals with black bands added at the top and
bottom of the picture are output.
ON:Conversion from 1035 to 1080 lines.
Assumes white-on-black display (VAR mode) when the F key
and F6 key are pressed simultaneously, and can be adjusted
with the ADJUST control. Adjustment is possible up to a
maximum of n0.5 H (depending on the format).
w1375 SAMPLE:1080/23p, 1080/24p and 1080/25p formats
w1320 SAMPLE:1080/50i format
w1100 SAMPLE:1080/59i format
w825 SAMPLE:720/59p format
(1_SAMPLEl13.5 nSEC)
Adjustment is by sample increments.
Initiates vertical interpolation during AT playback to reduce the
vertical movement of the playback images.
AUTO
:Automatically initiates interpolation in the JOG or VAR
mode.
OFF:No interpolation.
Returns the VTR to the VIDEO OUT HD menu screen.
Transfers the VTR to the VIDEO OUT HD SET UP STATE menu
screen.
°This item only displays and functions when the 1080/59i format has been selected.
ONoteN
Bear in mind that the top and bottom of the picture will be missing when ON is selected as the LINE CONV setting and a
1080 tape is played back. 
						

							– 28–
VIDEO OUT HD SET UP STATE menu
This menu is displayed by pressing the following keys: (or  )>>
OR
>>(or )>
F12F12F11F9VIDEO OUT
F12F8AUDIO OUTVIDEO OUT
Description
NORMAL:The standard mode is established (E-E through
mode is turned OFF).
THROUGH:When the EE/EE1 is selected, the E-E through
mode (AV minimum delay mode) is established.
°A discrepancy occurs between the video (audio) output and time
code output in the E-E through mode.
Transfers the VTR to the VIDEO OUT HD SET UP menu screen.
Transfers the VTR to the VIDEO OUT HD SET UP menu screen.
Key
F1
F2
F3–F7
F8
F9–F11
F12
F13
Key designation
——
EE_MODE
——
EXIT
——
STATE
——
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 
						

							– 29–
VIDEO OUT HD SET UP STATE menu
∑Selecting the TAPE/EE output signals
The video, audio and cue signals which are output during the VTR’s operation are switched on
this menu to TAPE or EE signals.
(1) Press the center cursor key to display the cursor.
(2) Move the cursor to the desired position using the cursor keys.
°The cursor will not move to places which cannot be set.
(3) Press the center cursor key to select TAPE or EE.
Refer to the following table for the types of setting options.Center cursor key
Cursor key
≥When a setting is to be established during head selection using the TEST menu or during edit-
ing, the setting applying to the operation concerned takes precedence over the setting select-
ed using the VIDEO OUT SET UP STATE menu.
≥When TAPE/EE has been set by F1 (OUTPUT) on the HOME menu, the HOME menu setting
takes precedence.
(Underline denotes the factory setting mode.)
Mode
CH
VIDEO
D.AUDIO
CUE
EJECT
FREEZE
BLACK
GRAY
FREE
NOISE
EE1
EE2
MUTE
EE1
EE2
TAPE
EE
STBY
OFF
FREEZE
BLACK
GRAY
FREE
NOISE
EE1
EE2
MUTE
EE1
EE2
TAPE
EE
TENSION
RELEASE
FREEZE
BLACK
GRAY
FREE
NOISE
EE1
EE2
MUTE
EE1
EE2
TAPE
EE
STBY
ON
TAPE
EE1
EE2
MUTE
EE1
EE2
TAPE
EE
REC
TAPE
EE1
EE2
TAPE
EE1
EE2
EE
EDIT
REC
TAPE
EE1
TAPE
EE1
EE
JOG/
VAR
TAPE
TAPE
MUTE
TAPE
SHTL
TAPE
TAPE
MUTE
TAPE 
						

							– 30–
VIDEO OUT SD menu
This menu is displayed by pressing the following keys:>F9VIDEO OUT
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1