Panasonic Multi Format Digital Hd Video Cassette Recorder Ajhd3700b 1 Operating Instructions

							– 161–
SERVO TEST menu
This menu is displayed by pressing the following keys:#.F7TEST
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 
						

							– 162–
SERVO TEST menu
Key
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
F13
Key designation
TORQUE
Reel torque adjustment.
DATA SEND
Torque data forwarding.
MEASURE
(Measure)
AT
AT head adjustment.
METER
PG SHIFT
PG shifter adjustment.
ADJ RATE
Adjust rate.
EXIT
MECHA
Mechanical adjustment.
TRACKING
Tracking adjustment.
X VALUE
BIMORPH INIT
Removal of hysteresis at
AT voltage element.
ADJ ENABLE
Description
Key for adjustment by service personnel.
Key for adjustment by service personnel.
Key for adjustment by service personnel.
Key for adjustment by service personnel.
ERROR:Displays inner error level.
ENV:Displays envelop level.
Key for adjustment by service personnel.
Key for adjustment by service personnel.
Returns the VTR to the TEST menu screen.
Key for adjustment by service personnel.
Under normal conditions, tracking adjustment is not necessary.
Adjust if there are tracking discrepancies while editing.
VAR:Tracking is adjusted manually. Refer to “Manually
adjusting the tracking” (page 106).
FIX:Tracking is fixed at the center position of the
manual adjustment.
OPT. ONCE
:Tracking is optimized only once while the tape is
playing up to the IN point during the first editing
after the cassette has been inserted. Thereafter,
optimization does not take place. However,
optimization can be performed again. Refer to
“Automatically adjusting the tracking” (page 100).
OPT. AUTO:Tracking is optimized while the tape is playing up
to the IN point with each editing. Refer to
“Automatically adjusting the tracking” (page 105).
Key for X value adjustment by service personnel.
Key for adjustment by service personnel.
Key for adjustment by service personnel. 
						

							– 163–
SERVO TEST menu
∑Error rate display
The error rates are displayed in terms of the 1) TOTAL ERROR
and 2) INNER ERROR.
For details, refer to the description of the error rate display for the
RF TEST menu (on page 155).
∑Tracking adjustment
For details of the tracking adjustment, refer to the INSERT/ASSEMBLE MANUAL EDIT SET UP menu (on
page 105). 
						

							– 164–
TEST FRONT menu
This menu is displayed by pressing the following keys:#
F6TEST
Key
F1
F2
F3–F7
F8
F9–F13
Key designation
PANEL
Display check.
KEYCHECK
Front panel key check.
——
EXIT
——
Description
Transfers the VTR to TEST FRONT PANEL menu screen.
Transfers the VTR to the TEST KEY CHECK menu screen.
Returns the VTR to the TEST menu screen.
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 
						

							– 165–
Key
F1
F2–F7
F8
F9–F13
Key designation
MODE
Display dot check.
——
EXIT
——
Description
The entire display panel is lighted up in a fixed pattern and
display dots are checked. Each time the key is pressed, 12 types
of pattern are displayed.
Returns the VTR to the TEST FRONT menu screen.
TEST FRONT PANEL menu
This menu is displayed by pressing the following keys:##.F1F6TEST
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 
						

							– 166–
TEST FRONT KEY CHECK IN menu
This menu is displayed by pressing the following keys:##.F2F6TEST
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1
Key
F1–F7
F8
F9–F13
Key designation
——
EXIT
——
Description
Returns the VTR to the TEST FRONT menu screen. 
						

							– 167–
TEST FRONT KEY CHECK IN menu
∑Dial and controls
When the ADJUST control, headphones control or search dial is
turned, the number of pulses counted is displayed.
∑LEDs
Each time the F1 key is pressed, the LEDs on the panel light up in
sequence and are checked.
∑Keys
When a key (button) on the panel is pressed, the corresponding
key on the menu screen is highlighted, and the buzzer sounds at
the same time. This makes it possible to confirm that the front 
microcomputer has recognized the key.EJECT
SDHDCHANNEL CONDITIONVIDEOAUDIOSERVO
HOMEASSEM INSERTMULTICUEVIDEOINF13789
456
123
0CTF
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 L AUDIO MONITOR UNITYHEADPHONES
PULL
OPENLEVELCURSOREXECUTE PREROLLENTRY REW STOP REC/EDITPLAYREC INHIBITSTAND BY FFREVIEW
PREVIEWR
OUTINOUTAUDIO
LINE OUTSHTL JOG VAR
INPUT CHECK REMOTEADJUST
POWER
AUTO OFFON
OFF
UNITY
/VARTC/CHRSET UPTEST DIAGFROM COPY/BSENT
AUDIO
PULL
OPEN
EJECT
SDHDCHANNEL CONDITIONVIDEOAUDIOSERVO
HOMEASSEM INSERTMULTICUEVIDEOINF13789
456
123
0CTF
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 L AUDIO MONITOR UNITYHEADPHONES
PULL
OPENLEVELCURSOREXECUTE PREROLLENTRY REW STOP REC/EDITPLAYREC INHIBITSTAND BY FFREVIEW
PREVIEWR
OUTINOUTAUDIO
LINE OUTSHTL JOG VAR
INPUT CHECK REMOTEADJUST
POWER
AUTO OFFON
OFF
UNITY
/VARTC/CHRSET UPTEST DIAGFROM COPY/BSENT
AUDIO
PULL
OPEN
EJECT
SDHDCHANNEL CONDITIONVIDEOAUDIOSERVO
HOMEASSEM INSERTMULTICUEVIDEOINF13789
456
123
0CTF
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 L AUDIO MONITOR UNITYHEADPHONES
PULL
OPENLEVELCURSOREXECUTE PREROLLENTRY REW STOP REC/EDITPLAYREC INHIBITSTAND BY FFREVIEW
PREVIEWR
OUTINOUTAUDIO
LINE OUTSHTL JOG VAR
INPUT CHECK REMOTEADJUST
POWER
AUTO OFFON
OFF
UNITY
/VARTC/CHRSET UPTEST DIAGFROM COPY/BSENT
AUDIO
PULL
OPEN 
						

							– 168–
Inserting the IC card
The insertion slot for the IC card is located on the back left of the front panel.
Insert the IC card before using the TEST IC CARD menu.
Eject button IC card 
						

							– 169–
TEST IC CARD menu
Preparations
When an error to be logged has occurred, this unit enables information on the date and time of the occurrence
of the error to be recorded in addition to the TC information in the log. Initial registration of the date and time
is required in order for this information to be recorded. Bear in mind that if the unit’s power has been off for
more than one week, it will be necessary to re-register the date and time.
How to register the date and time
When  and then the  key are pressed, a menu appears.
1. Press the center cursor key.
The year display at the top center of the front panel now appears as a white-on-black display.
2. Use the number keys to change the date and time.
Use the cursor keys (2, 1) to move the white-on-black display to the location where the information is to
be changed, and change the information using the number keys.
3. After having changed and registered the date and time information, press the ENT key to enter it.F13TEST
F13
F12
F11
F10
F9
F8 F7 F6 F5 F4 F3 F2 F1 
						

							– 170–
TEST IC CARD menu
Description
User file management takes place using IC card.
When the F key is pressed, transfer is made to TEST IC CARD
USER FILE menu.
≥There is a load/save function for current (present deck status)
and all registered files.
≥When user file is forwarded to deck, whether SYS_H and
SYS_C should be sent together can be selected.
100 CUE_POINTS (MULTI_CUE) can be loaded/saved to IC
card.
When the F key is pressed, transfer is made to MULTICUE
menu.
≥Whether to send all at once or by page can be selected.
Function available for memory of deck mode, time code, type
and date/time when warning appears.
When the F3 key is pressed, the VTR is transferred to the TEST
IC CARD ERROR LOG menu.
≥Function available for 50-step memory data.
≥When memory buffer becomes full, there is a function for
switching to erasure of old material and renewal of new
warning.
≥Function available for memory storage of this data on IC card.
≥Function available to monitor IC card data.
Returns the VTR to the TEST menu screen.
IC card is formatted. Please note that all data on the IC card is
destroyed.
When the F key is pressed together with C key and F13
(FORMAT) key, the IC card is formatted.
Key
F1
F2
F3
F4–F7
F8
F9–F12
F13
Key designation
USER_FIL
MULT_CUE
ERR_LOG
——
EXIT
——
FORMAT
ONoteN
Avoid installing an IC card formatted by this unit in the AJ-HD2000, AJ-HD2700, AJ-HD3000, AJ-HD3700, AJ-HD3700H,
AJ-HD3700A or any other model.
Conversely, avoid installing an IC card formatted by any other model in this unit.
The file structure used for these cards is different from one model to another, and this may give rise to
problems in the VTR’s operation.